Page 2 of 2 FirstFirst 12
Results 26 to 49 of 49

Thread: Agp+ddr1+conroe→asus P5pe-vm

  1. #26
    Xtreme Member
    Join Date
    Jun 2005
    Posts
    274
    Quote Originally Posted by cirthix
    asus is being brave. 266fsb "stock" support on an i865 chipset
    Certainly brave, but may not be that impossible. As the P4P800's /SEs have scaled 290MHz with stock, or little voltage bump
    Waiting for Crysis

  2. #27
    Xtreme Member
    Join Date
    Oct 2004
    Posts
    171
    @hicookie: any news about this board?! Are there oc settings in the BIOS?

  3. #28
    Xtreme Member
    Join Date
    Dec 2005
    Location
    Kiev
    Posts
    147
    mibo No. Only timming settings in bios. We can OC it onlt by ClockGen (ICS 950405)/i865 Tweaker. Russian overclocker got only 300+ fsb and anotherone only 283 fsb.
    P.S. This mobo doesn`t support x6800, only e6x00

  4. #29
    Registered User
    Join Date
    Mar 2006
    Location
    Hamburg, Germany
    Posts
    40
    Quote Originally Posted by Kango
    Conroe on 3-phase power??? I have a lot of doubt about Conroe on this board. And, of course, the box does not mention Conroe. Best of luck but you should consider a backup CPU when Conroe will not boot.
    the GA-965P-S3 also is only 3-phase... the foxconn P9657AA-8EKRS2H has also 3 phase and can hit about 413 MHz FSB.

  5. #30
    Xtreme Enthusiast
    Join Date
    Apr 2006
    Location
    Brasil
    Posts
    534
    If it doesn't work, look for:
    ASrock ConRoe-865PE or 775i65G.
    Last edited by doompc; 11-04-2006 at 02:22 PM.

  6. #31
    Xtreme Member
    Join Date
    Sep 2006
    Posts
    151
    Quote Originally Posted by Kunaak
    conroe + Ti4200 would be fun.

    revive a real classic.
    that card had a good 2 year run, even after it was discontinued.

    i got my whole computer except my gpu.. set it up and hadda use my old fx5200 and well... 3dmark 06 i scored ~100 and i couldnt get over 50fps in css even with everything low...
    gigabyte 965p-s3
    intel c2d e6300 @ 3.255 24/7 (stock hs/f)
    corsair xms2 (twin2x1024a-6400c4) ddr2 800 @ 930 5-5-5-15
    xfx 7600gt @ 650/841 [560/725 stock] (stock hs/f)
    samsung spinpoint-p 160gb
    antec sonata2 w/ 450w trupower2.0 psu

    i love my budget gaming rig <3

    highest OC so far.

  7. #32
    Xtreme Legend
    Join Date
    Mar 2005
    Location
    Australia
    Posts
    17,242
    Quote Originally Posted by Kango
    Conroe on 3-phase power??? I have a lot of doubt about Conroe on this board. And, of course, the box does not mention Conroe. Best of luck but you should consider a backup CPU when Conroe will not boot.
    WHY?!?!?!?!?!

    DS3 in the first two benching links in my sig is a 3-phase power mobo and kicked arse no problems at all
    Team.AU
    Got tube?
    GIGABYTE Australia
    Need a GIGABYTE bios or support?



  8. #33
    Xtreme Cruncher
    Join Date
    Jun 2006
    Location
    San Jose
    Posts
    1,273
    this will be interesting lol..that is one tiny board tho
    For all your cooling needs: ShopPTS.com
    System:
    Rampage Formula // E8400 @ 4.0 (1.28v)
    4x 1GB Ballistix Tracer @ 600 (5-5-5-15)
    4x 74GB Raptors 16MB Raid-0 // Samsung F1 1TB
    eVGA 8800GTS 512MB @ 800/1111/2000
    Corsair HX620 // LG246WP
    Cooling:
    D-TEK FuZion // PA120.3 // 3x Yate Loon SH
    MCW60GT // EK Multi-150 // DDC-2 + Petra's Top

  9. #34
    Xtreme Member
    Join Date
    Jan 2003
    Location
    Kortrijk-Belgium
    Posts
    278
    any updates?
    Allendale 15sec pi
    x800gto 42k2001

    Coolermaster ATC 310
    1.5Tera

  10. #35
    Registered User
    Join Date
    Dec 2006
    Location
    Tampere, Finland
    Posts
    33
    support e4300?

  11. #36
    Xtreme Cruncher
    Join Date
    Feb 2003
    Location
    Estonia
    Posts
    1,097
    id really like to see geForce 256 + kentsfield
    now..that would be gfx limited on a whole new level
    Member of XS WCG since 2006-11-25




  12. #37
    Registered User
    Join Date
    Jun 2004
    Location
    Portugal
    Posts
    26
    Quote Originally Posted by Soakki View Post
    support e4300?
    Yes, I've bought this motherboard last week + e4300 and working great
    Conroe E4300 + Asus P5PE-VM + Geil 2GB 6-3-3-2.5 DDR 400 + Seagate 160GB HDD + ATi X1950 PRO + Creative Audigy 2 ZS + SCORPIO LC6480S 480W Free-Plug
    www.madtech.com.pt

  13. #38
    c[_]
    Join Date
    Nov 2002
    Location
    Alberta, Canada
    Posts
    18,728
    bump?

    All along the watchtower the watchmen watch the eternal return.

  14. #39
    Registered User
    Join Date
    Feb 2005
    Location
    Bucharest, Romania
    Posts
    35
    Quote Originally Posted by cirthix View Post
    asus is being brave. 266fsb "stock" support on an i865 chipset
    P4P800-SE did "stock" ~300FSB (at least mine)... P4C800 also managed 280+ without problems...

    ontopic - this is the kind of mobo that's made for mods
    a E4400 with BSEL mod and a clean vmod and a little Clockgen should easily make a nice cheap C2D 3GHz team
    Last edited by mache; 04-16-2007 at 07:34 AM.
    just cruisin... air style overclocking
    cely D 315@4GHz
    p-M 740@2.87GHz
    e6400@3.74

  15. #40
    Xtreme Enthusiast
    Join Date
    Oct 2004
    Posts
    587
    Reaching 333MHZ FSB stable is pretty hard for the i865 chipset.

    I've only managed to get 310MHz max out of it (just pencil mod on chipset though) on the Asrock Conroe865PE that I owned once (300FSB set in bios), though I hadn't tried fitting a better heatsink on the chipset and upping the chipset voltage.

    BSEL mods didn't work on that Asrock board mind you although that didn't effect the overclocking one bit.

  16. #41
    Registered User
    Join Date
    Jun 2004
    Location
    Portugal
    Posts
    26
    Well, since P5PE-VM doesn't have any overclocking settings on Bios, I'm doing BSEL mod 1066 and see how it handles it. Shouldn't be a problem, since the mobo supports 1066 C2D... just waiting until conductive paint dries... I'll post news when its working...or not working...
    Conroe E4300 + Asus P5PE-VM + Geil 2GB 6-3-3-2.5 DDR 400 + Seagate 160GB HDD + ATi X1950 PRO + Creative Audigy 2 ZS + SCORPIO LC6480S 480W Free-Plug
    www.madtech.com.pt

  17. #42
    Registered User
    Join Date
    Jun 2004
    Location
    Portugal
    Posts
    26
    Oh yeah baby! Its working like a charm

    Now this is pushing it, but maybe possible 1333?

    Pitty is the 3:2 divider on the mem... nothing that clockgen cant manage
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	cpuz1066.jpg 
Views:	2285 
Size:	80.7 KB 
ID:	57743   Click image for larger version. 

Name:	IMAGE_00012.jpg 
Views:	2450 
Size:	148.2 KB 
ID:	57745   Click image for larger version. 

Name:	IMAGE_00013.jpg 
Views:	2272 
Size:	164.6 KB 
ID:	57746  
    Last edited by zeon; 04-16-2007 at 11:17 AM.
    Conroe E4300 + Asus P5PE-VM + Geil 2GB 6-3-3-2.5 DDR 400 + Seagate 160GB HDD + ATi X1950 PRO + Creative Audigy 2 ZS + SCORPIO LC6480S 480W Free-Plug
    www.madtech.com.pt

  18. #43
    Registered User
    Join Date
    Jun 2004
    Location
    Portugal
    Posts
    26
    YAIKS! Something really weird happened!

    I overclocked to 1333 fsb using clockgen in windows, working fine.
    Rebooted the machine, and take a look at the bios now?!

    I shutdown the rig and boot up again, and now its back to 1066. Does this mean that I can BSEL to 1333 on this motherboard?
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	IMAGE_00014.jpg 
Views:	2493 
Size:	145.5 KB 
ID:	57747  
    Conroe E4300 + Asus P5PE-VM + Geil 2GB 6-3-3-2.5 DDR 400 + Seagate 160GB HDD + ATi X1950 PRO + Creative Audigy 2 ZS + SCORPIO LC6480S 480W Free-Plug
    www.madtech.com.pt

  19. #44
    c[_]
    Join Date
    Nov 2002
    Location
    Alberta, Canada
    Posts
    18,728
    Looks light it might, and even if it doesnt clockgen works fine

    I think I need one of these boards, my ASRock 775Dual-VSTA craps out at 305... 'though I havent done any mods to it yet.

    All along the watchtower the watchmen watch the eternal return.

  20. #45
    Registered User
    Join Date
    Jun 2004
    Location
    Portugal
    Posts
    26
    You might not beeing able to get that, depends if you use SATA disks or not. Remember, there's no pci/agp lock, so you will be dependent on how stable your HDD are in overclock too I left yesterday my rig testing @ 1333 fsb and it didn't hold on for long... anyway, I am able to run totally stable @ 1200fsb with CPC ON and PAT ON on the memories, so I'm quite happy
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	nuclearus1200CPCON_PATON.jpg 
Views:	2148 
Size:	96.4 KB 
ID:	57785  
    Conroe E4300 + Asus P5PE-VM + Geil 2GB 6-3-3-2.5 DDR 400 + Seagate 160GB HDD + ATi X1950 PRO + Creative Audigy 2 ZS + SCORPIO LC6480S 480W Free-Plug
    www.madtech.com.pt

  21. #46
    Xtreme Addict
    Join Date
    Dec 2002
    Location
    ithaca, ny
    Posts
    2,431
    lol nice thread. and good job asus for releasing updates on such old bioses! this is 865g too eh. real impressive.
    E8400 8x500=4000 | ABIT IP35-E
    2x2GB Tracer PC2-6400 1:1 500MHz 5-5-5-15 2.0V
    Galaxy 8800GT 800/2000/1100 1.3V | 80GB X25-M G2 + 1.5TB 7200.11 | XFiXG
    Fuzion | MCW60 | DDC2+Petra | Coolrad22T+BIP1

    Merom 13x133=1733 1MB L2 0.950V

  22. #47
    I am Xtreme
    Join Date
    Dec 2002
    Posts
    5,931
    865/875 were the best chipsets ever, still going strong after all these years...

    we need a unlocked chip on these and some R9800 benching, if i had the unlocked chip i would already be on it with my BH-5 i have here.

  23. #48
    Registered User
    Join Date
    Feb 2005
    Location
    Bucharest, Romania
    Posts
    35
    From what I've heard the Asrock Conroe 865PE has bios overclocking options although quite limited... It would be nice to see if any of them can handle a higher multi on a x6800 ...
    just cruisin... air style overclocking
    cely D 315@4GHz
    p-M 740@2.87GHz
    e6400@3.74

  24. #49
    Xtreme Member
    Join Date
    May 2005
    Location
    Bangor
    Posts
    179
    It would make a great AGP benching rig!

Page 2 of 2 FirstFirst 12

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •