Your kidding, right?
Well you are trying to go to 500 bus speed with the core/CPU voltage at 1.25. That is lower then stock. Try a Vcore/CPU voltage of 1.475>1.55 and start with the bus speed around 400 and work up from there. Also set the Mem voltage to something in the 2.25 range and NB to 1.45 and FSB TV to 1.4. If it boots at 400 then work the bus up from there or work the voltages down and leave the system set at 400.

Quote Originally Posted by psychopath
HI

I'm portuguese and I need help to stablization my OC to 100%

I have P5B DELUXE WIFI + E600 + GSKILL PC6400 HZ 2GB

i have this configuration..


AI TUNNING: Manual
CPU: 500
DRAM FREQUENCY: 1000
PCI EXPRESS FREQUENCY: 100
PCI CLOCK SINCNOZIAZION MODE: 33
SPREDD SPECTRUM: DISABLED
MEMORY VOLTAGE: 2.30v
CPU VCORE: 1.250
FBS TERMINATION VOLTAGE: 1.40v
NB VCORE: AUTO
SB VCORE: AUTO
ICH CHIPSETE: AUTO

all correct?


On timings selected

4 4 4 12

STATIC READ CONTROL: DISSABLED


all correct?


On CPU selected

MODIFY RATIO SUPORTE: ENABLED
RATIO CMOS SETINNG: 6
C1E SUPORTE: DISABLED
MAX CPUID VALUE LIMIT: DISSBLED
VANDERPOLL TECNOLOGIE: ENABLED
CPU TM FUNCTION: ENABLED
EXECUTE DISABLE BIT: ENABLED
PECI: DISABLED

all correct?