-=Dfi Infinty&LanParty Rev B Faq and more=-

[skinnie]

well, wanted to give a sorta update...

friend who has exact setup i have/had...

DFI LanParty nF2 Ultra-B, XP-M 2500+ 0343 MPMW(both his, not mine, we ordered cpu's at same time, got same stepping) on Jinu117 VapoLi

right now we're stuck at around 2.8 full stable, little above actually..just haven't had the time to invest for a good oc session

his board dosn't seem to like alot of settings i could get, in fact, my best 1m pi time is still better than his when i did mine on water at a lower clock, but higher fsb...

but we've yet to change his bios...and hopefully he'll let me through in the vcore and vsense mods...

we are able to hit 246 on his OCZ platinum rev.2's(2x512 TCCD) at 11-2-2-2-2.0 with 2.8v, which is nice

pics and such later

also, i'm still hunting for a new DFI LanParty nF2 Ultra-B for myself...

that is ing insane..ordinary tccd in nf2 run that speed @ 2.5-2-2-2-5-2t :S

[VulgarHandle]

that is ing insane..ordinary tccd in nf2 run that speed @ 2.5-2-2-2-5-2t :S

his runs 1T (cpc on) and bandwidth is better with 11, not 5, on nf2..

we haven't done much since, haven't had time, and i'm pissed he won't let me throw on the vcore/vsense mods....(they're ready to go, just gotta be clipped on)

for myself, i'm about to settle on a nf7-s 2.0....just can't seem to find an ultra-b

[skinnie]

I run @8 I think it gives better bandwidth

[WeStSiDePLaYa]

aaah, what a blast from the past.

my first oc'ing board was the nf2 infinity. paired with a 2600+ mobile, 2x512mb mushkin BH-5 and a 5950U.

those were the good times, no need for 1000$ chips or quad sli, or 500$ psu's to be the best.

[skinnie]

ppl any of u gurus of dfi lpb know wich was the best bios for old bh5 stuff?modded or original...I'm now using oskar_wu 12.18 for my lil BH5

[skinnie]

ppl now that I find wich bios works..and alphas can anyone give me a page how to do the pencil mod to give more vdim?my problem is really vdim

[skinnie]

Ppl I now have done the vdimm mod that was on techpowerup but I can't pass 233 barrier..233 17h primestable with this alphas:



here's a pic of the board


but @234 3.4/.5 or even .6v it gives bsod in windows..

Tried "your" alphas and it is a lil more stable but after a while..bsod..

I have agp@67mhz,68mhz the 9800 will brake in memtest (I think it is the 9800pro,because I can play music without problems)
vagp - 1.6
vdimm - auto
vdd - 1.8 (that was what I needed to do 250 with the TCCD)
tried changing the timings to 2-2-3-11 or 2-3-2-11 but it is even worse...
drives and slew rates 5/10 1/10 5/10 (memory in 1st and 3rd channel)

any suggestion?