yea but can't i flash in windows using flashmenu? too lazy to find working floppy...Originally Posted by CoNMaN
awdflash M606C_13.A02 /CC /CD /CP /F /R /PY /SN
that will do it
yea but can't i flash in windows using flashmenu? too lazy to find working floppy...awdflash M606C_13.A02 /CC /CD /CP /F /R /PY /SN
that will do it
---Under construction---
More safe to do dos flash, some have hade bad flash in windwos with aw9d-max
please try to do dos flash
and i did \o/ but still one thing i was hoping to get fixed is that i could use lower multi but nope still buggy as hellMore safe to do dos flash, some have hade bad flash in windwos with aw9d-max
please try to do dos flash
---Under construction---
The board is less buggy:
@ 1:1 and
@ less than 395fsb or moore than 405fsb try that.
SuperPi 1Mb below 11 sec (4,62Ghz)
SuperPi 32Mb 12,37 sec (4,40Ghz)
Everest, 10700 Mb/s (4,62Ghz)
Last edited by CoNMaN; 10-10-2006 at 01:17 PM.
well first thing i must do is cool down this 7950gx2 beast, man it's hot hot hot
---Under construction---
Works perfect with flash in windowsMore safe to do dos flash, some have hade bad flash in windwos with aw9d-max
please try to do dos flash
intel i5 2500k
Asus P8Z68-V
EVGA GTX470
Corsair 8GB Vengence
Corsair HX1000W psu ,
High Speed Tech Station Top Deck,
Dell U2410
I've flashed from windows all times too (using winflash).
I'm the only one with this problem ?
My hard drives shutdowns every time I reset my computer ! This makes me nuts, I need to wait about 8 segons when Raid is loading every time... (they don't power up at POST, not until intel raid post is loading... )
|| Core 2 Quad QX6850 ES @ 3.5Ghz 1.35V || Thermalright Ultra 120 || Asus P5K3 Deluxe || Gskill F3-12800CL7D-2GBHZ
|| XFX 8800GTX || Dell 2005FPW 20" || Ultra X-Pro 750W LE || 3 x WD 320GB SD + 1 x Hitachi 500GB
is that with the 1.3 or 1.2 bios?? i noticed that as well... not sure if it's always or just sometimes...
not bad, i have flash to new beta bios, max mulitpiler to 31x,
8246 mhz, that`s like a 1M pi of 5 sec
Last edited by Pjoeloe; 10-10-2006 at 03:52 PM.
Conroe E6600 retail @ 4 Ghz - 1.5v, 48c max
Asus P5B Deluxe
Nvidia 7900GT 512MB superclocked
2*1GB DDR2 667 @ 888 4-4-4
550 W enermax
all air and silent
haha, i wish i can do that8246 mhz, that`s like a pi of 5 sec
i have a strange yet extremely annoying problem with this board. I have since reformatted twice only to have the same results. I change the windows appearance to "Classic Windows" to get rid of all the cartoony garbage, but 50% of the time upon a reboot it boots back up to Windows XP Theme. WTF! Im getting pretty annoyed here. This didnt happen at all with my DFI board. I dont even understand how a motherboard could cause this...
7820X | Asrock X299 Taichi XE | Gigabyte 1080 Ti Xtreme | 32GB Memoriez | Corsair HXi1000 | 500GB 960 Evo
Hey I had that happen too! I thought it was something else like a bad windows install. I changed to the XP style but in grey and kinda forgot the problem until now. If anyone has some info there are at least 2 of us that would appreciate it
lol, so it IS a board issue!
7820X | Asrock X299 Taichi XE | Gigabyte 1080 Ti Xtreme | 32GB Memoriez | Corsair HXi1000 | 500GB 960 Evo
nice new Abit's AB9 Pro and AW9D MAX motherboard reviews
http://techreport.com/reviews/2006q4...2/index.x?pg=1
Conroe E6600 retail @ 4 Ghz - 1.5v, 48c max
Asus P5B Deluxe
Nvidia 7900GT 512MB superclocked
2*1GB DDR2 667 @ 888 4-4-4
550 W enermax
all air and silent
the highest they could get the Max was 350? something wasnt right...
7820X | Asrock X299 Taichi XE | Gigabyte 1080 Ti Xtreme | 32GB Memoriez | Corsair HXi1000 | 500GB 960 Evo
Tell me if I am wrong but, did they really test the motherboards without updating the BIOS?
Uh wasnt that already shown here that its an SLI connector?The "Dual Graphic Link" may have also been included for future CrossFire products, which ATI has admitted will move to an internal connector.
I'd still like to see a formal review of the AW9D non-MAX.
they used 1.2. look at their setup page.Tell me if I am wrong but, did they really test the motherboards without updating the BIOS?
Main Rig:
CPU Intel i5 2500K @ 4500mhz
Mobo Gigabyte GA-Z68X-UD3H-B3
Memory 4x4GB Corsair Vengeance DDR3 1600
Video Cards Sapphire 5850
PSU Silverstone ST75F Strider 750W
Hard Drive OCZ Solid 3 60GB | OCZ Vertex 2 60GB | Samsung 103SJ's 4TB
Cooling Thermalright Ultra 120 | 1 Yate Loon D12SM 120MM
Sorry that I was not clear. I meant for the P5W-DH. I thought it should be like 14xx? Could the newer bios change the scores to be better?
sorry but what do you mean exactly??
another overnight Blend Test, tested with lower vMCH (1.65v) & vdimm (2.1v).
P.S. I forgot to set back the RAM timing to 4-4-3-8, just forget it.
Actually I think it is locked @ 100mhz. If you try to change it in using guru in windows, system crashes.
kenofstephen,
you have had impressive results with is board, but considering your using an ES chip I can't see where its doing much good as a comparison since retail is what's available for purchase for most people.
Last edited by The Nemesis; 10-10-2006 at 05:49 PM.
Praetor
» Intel i7 2600K 3103B306 » Asus Maximus IV Extreme-Z » Asus GTX 470's TRi-SLI » Corsair Dominator GT CMT4GX3M2A2000C8 » Corsair Force F180 SSD » Corsair AX1200 PSU » Corsair 800D
» Cooling : Swiftec Apogee XT » Swiftec MCP350-DDC1 w/XSPC Dual DDC Bay Reservoir » Swiftech MCR320-QP w/Scythe SlipStreams 110CFM
The Yamato
» Intel i7 920 3849B028 or i7 980X » Asus Rampage III Extreme Black Edition » Asus HD6970's QuadFireX or Asus GTX 570's 4way SLI » 6GB Corsair Dominator GT TR3X6G1866C7GTF » Corsair Force F180 SSD » Corsair AX1200 PSU » Microcool Banchetto 101
» Cooling : Dragon F1 Extreme Edition(LN2) » Custom SS by RunMc »
Hi Nemesis,
from my observation, there are a lot of good B2 overclockers, especially the L628B121 batch, also, my ES is not that good, just I have no money to get a retail.
looking forward to B3 Stepping 7, I expect it will be even better.
Posting Permissions
Reply With Quote
Bookmarks