all i have to say is![]()
![]()
to that vdimm
![]()
all i have to say is![]()
![]()
to that vdimm
![]()
If with the new BETA bios ABIT has solve the 460MHz wall issue, I think yes....I even try 2.2VMCH but 460MHz wall was there......I'll test with the new BETA bios to see if it's OK now or not...Originally Posted by Hazzan
![]()
INTEL PWA FOR EVER
Dr. Who my arss...![]()
.........
One friend bought one retail AW9 max and told me that can do 481fsb with the latest bios but only 461fsb stable fot 1m pi..![]()
When Mercedes brought their C111 to Talledega years ago and blew away the closed course record did it count? Yes..
That was a "factory" car and a "one of" that no one could buy and was never sold.
Records are records and that is a fact so get over it.
Yes I've changed from ASUS P5WDH-Deluxe to ASUS P5B-Deluxe and to ABIT AW9D-MAX with no problem....Install Intel inf firstly....Originally Posted by Pjoeloe
![]()
![]()
INTEL PWA FOR EVER
Dr. Who my arss...![]()
.........
just curious, have the sticks degraded any after running them at 3.4v so much?![]()
Got a fan over those memory sticks? No? Well get to it before you kill them
thanks, yes, I heard the news also from opb, so that`s greatOriginally Posted by hipro5
Conroe E6600 retail @ 4 Ghz - 1.5v, 48c max
Asus P5B Deluxe
Nvidia 7900GT 512MB superclocked
2*1GB DDR2 667 @ 888 4-4-4
550 W enermax
all air and silent
as far as i know he was playing with 3.5v and the sticks havent been the same since.Originally Posted by ozzimark
HiPro5 PLEASE BY SOME WATER FOR YOUR RAM
http://www.mips-computer.de/sg_WATER..._RAMCOOLER.htm
Hmmmm... P5W64 or AW9DMAX??
Still depends on getting a cherry, though...
My P5W64 stopped at 430.
difficult decision indeed... my MAX maxed out @ 420...
maybe becasue i turn too fast?! hahahaOriginally Posted by hipro5
2.8v direct to can't read (3 turns)! !! i think that is 3.3v but not sure....
i was tring to lower the voltage.....
For who are in doubt about Cellshock 6400 here you have some nice pics:
3-3-3-8:
3-4-4-8:
http://valid.x86-secret.com/show_oc?id=131594
4-4-4-12:
From 3-4-4-8 to 4-4-4-12 only a gain of 3MHz... looks like something is limiting me at 575MHz fsb.![]()
Just a quick 1M Spi test @ 3-4-4-4 with E6600 @ 4683MHz Stock Vapochill LS Cooled:
Vmem used:
Looks like 6400 kits have D9GKX. I dont know because i didnt taked off the heatspreaders but this kit is making same results of my other two Cellshock 8000 CL4 kits.
Vmem @ 2.72v and just one 92mm fan giving them some air and it was cold.![]()
I believe that this babies can go to 600MHz @ 4-4-4-12. Just need to find what is blowing @ 575fsb.
Congratulations Cellshock. This was reallymems!
![]()
Last edited by Lasac; 10-20-2006 at 06:20 PM.
Conroe E6600 @ 4712.8MHz on VapoLS (+6ºC)
Asus P5B Deluxe wi-fi edition
2x1GB CellShock 8000 CL4 @ 1144MHz 4-4-4-12 2.35v
StockCooled X800GTO with XT bios mod (Sapphire X1900XTX DEAD!)
Enermax Liberty 620W
Western Digital 250GB 16MB 7200 SATA2
Lian-Li PC60
3Dmark01: http://service.futuremark.com/compare?2k1=8959998
very nice lasac
![]()
Why dont you use mem dividers?
Here is what chips Cellshock is using according to one of its employees:
Do you have the possibility to test the same sticks on a 975X board?DDR2-800 CL4 - Micron D9GMH
DDR2-1000 CL5 - Micron D9GMH/D9GKX
DDR2-1000 CL4 - Micron D9GKX
Did you buy the stick from a shop or did you request them from Cellshock?
オタク
"Perfection is a state you should always try to attain, yet one you can never reach." - me =)
Buy them at shop.
I know that Cellshock have D9GMH on 6400 sticks but these 6400 sticks performs like D9GKX.
When I have more time i will fully test them.![]()
Conroe E6600 @ 4712.8MHz on VapoLS (+6ºC)
Asus P5B Deluxe wi-fi edition
2x1GB CellShock 8000 CL4 @ 1144MHz 4-4-4-12 2.35v
StockCooled X800GTO with XT bios mod (Sapphire X1900XTX DEAD!)
Enermax Liberty 620W
Western Digital 250GB 16MB 7200 SATA2
Lian-Li PC60
3Dmark01: http://service.futuremark.com/compare?2k1=8959998
Now some tests with low voltage:
4-4-4-12:
http://valid.x86-secret.com/show_oc?id=131854
3-4-4-4:
http://valid.x86-secret.com/show_oc?id=131894
3-3-3-8:
http://valid.x86-secret.com/show_oc?id=131899
3-3-3-1:
http://valid.x86-secret.com/show_oc?id=131898
Tomorrow i'll try to spend some time trying higher mem multi to discover the max fsb @ 4-4-4-12 2.72v
Conroe E6600 @ 4712.8MHz on VapoLS (+6ºC)
Asus P5B Deluxe wi-fi edition
2x1GB CellShock 8000 CL4 @ 1144MHz 4-4-4-12 2.35v
StockCooled X800GTO with XT bios mod (Sapphire X1900XTX DEAD!)
Enermax Liberty 620W
Western Digital 250GB 16MB 7200 SATA2
Lian-Li PC60
3Dmark01: http://service.futuremark.com/compare?2k1=8959998
I have finally found some DDR2 that I really want but its as rare as hens teeth in AU![]()
![]()
lots and lots of cores and lots and lots of tuners,HTPC's boards,cases,HDD's,vga's,DDR1&2&3 etc etc all powered by Corsair PSU's
you can also find some GKX on 800
lets call it special-christmas edition (or whatever you like)... watch out for batch: 1.09196.95.360 and 1.09256.97.360![]()
Last edited by Bluebeard; 11-15-2006 at 03:44 AM.
Alonso why not have a Cellshock support forums hereOriginally Posted by Alonso
there are many cellshock users on XS
![]()
plse give us some more time - until then i will do my best to support you as good as i can in the specific threads![]()
Bookmarks