Palit / Xpertvision Geforce 7900GT 512MB VMod


A 10k Ohm variable resistor is recommended. Solder it to the point marked and to ground, for example a leg of the PCIe power (where the black cable goes to!)
To reach a higher VGPU, decrease the resistance to 600 Ohm or lower. 550 Ohm result in 1,45VGPU (my card!)



Regards,
aLVaMaN

We are working on the VMem Mod. I will edit this post.

Previous measurement data:
Voltage VGPU, Resistors VGPU