E6600 on P5W64-WS PRO at 4GHZ bootable !!!

**camouflage** · 09-27-2006, 02:56 AM

Originally Posted by vudoodoodoo

Just ordered this mobo and E6600 from ZZF. Can't wait!
Actually I have to. Gotta wait on Tank Guys.

Update? I just received my CELLSHOCK DDR2-1000....

Sry for

**Simon** · 10-04-2006, 12:41 AM

Originally Posted by Poodle

If you want maximum cooling the Ultra 120 is very nice with it's low weight...

Thanks for the tip!

I just ordered an Ultra 120. Do you have a fan to suggest?
And I also appreciate any idea in what direction to mount the Ultra 120.
My board is mounted like this:

**Mykou** · 10-04-2006, 01:32 AM

I've already tried p5w DG2 WS pro and did'nt find it superior to p5W DH ( at least with my chip )

Doess the p5w64 offers more than DG2 WS pro ?

**camouflage** · 10-04-2006, 03:09 AM

Originally Posted by Mykou

I've already tried p5w DG2 WS pro and did'nt find it superior to p5W DH ( at least with my chip )

Doess the p5w64 offers more than DG2 WS pro ?

I think it does, still bootable:

Easy Vdimm pencil mod - now I have max. 2.8 volts. This is done with 2.66 Vdimm

.

**Spacemaster** · 10-04-2006, 03:21 AM

Please ansver me.

**Durzel** · 10-04-2006, 03:37 AM

Probably about 1.5675v

**bubu..** · 10-04-2006, 04:17 AM

this mobo give +0,05volt in bios.....

exactly you set 1,55volt in bios, real is 1,60volt.... this mobo drop in positive 0.01volt

it becomes 1.61v under load

this is the best mobo 975....for asus

**Durzel** · 10-04-2006, 04:27 AM

I'm not so sure about that...

If I set 1.4750v in the BIOS I see at least 1.53v in PC Probe at idle, but it vdroops to about 1.49v at full load. It's more accurate to say that the board maintains the vCore you set in the BIOS at load, but at idle it's easily 0.5v more.

**camouflage** · 10-04-2006, 08:14 AM

Sorry for late anwering but different time zone here

- the 4,014MHz SP1M is done with 1.585 Vcore in BIOS.

**charlie** · 10-04-2006, 08:27 AM

Originally Posted by Simon

Thanks for the tip!

I just ordered an Ultra 120. Do you have a fan to suggest?
And I also appreciate any idea in what direction to mount the Ultra 120.
My board is mounted like this:

Try the fan on the bottom, airflow upwards into PSU intake... or fan on the right, airflow towards rear.

**Blacklash** · 10-04-2006, 08:48 AM

Nice results! Good board, and the AW9D-Max will boot @ 4.0GHz too out of the box, no mods:

CPU Type: E6600
Clock SPeed: 4005MHz
Stepping: 6 B2
Week: L629
Code: A438
Vcore Set in bios: 1.65v

Cooling: Air
Cooler brand/model: Scythe Ninja Plus

Motherboard: Abit AW9D-Max w/2.00 Mch
Bios Version: 12
Memory: Muskin
Rated speed: 6400
Timmings: 5-5-5-15

http://valid.x86-secret.com/show_oc?id=125924