P4gpl-x mod (need more mem?)

[skönnbrink]

Well i did a little mod on my p4gpl-x

Unfortenly i don't have any camera right now, but will try get some pics asap.

A hint







Well, i sat down doing the Vdimm mod, and i saw that there actually was soldering points for the other Mem-slots, probably the exakt same pcb as P4GD1. So i took a broken motherboard and started desolder a slot.

After maybe 4-5 hours i was finaly done and i had a lose slot to solder on my board. Another hour later i had it fixed on the P4gpl-x

I acctualy thought i had to flash to a P4GD1 bios to get it working, but i had wrong, it worked at once.

Now i need to try this on the IDE-channels and put one more slot so i can use all my 4*256 bh5.

Anyone know how i can get Dual-channel on 3 mems?

Edit: some spelling

[Kriller]

I'm glad it worked for you!

Fix pics asap!

Can you see an extra IDE i bios? If not, it will probably not work...

[skönnbrink]

I'm glad it worked for you!

Fix pics asap!

Can you see an extra IDE i bios? If not, it will probably not work...

If i don't se it i will try to flash bios

Noticed that i only have 512mb in the bootscreen. So that's probably why it says DC in cpu-z

[Micutzu]

Congrats ... i know it's alot of work to get the DIMM slot out and resolder it. Good thing they left the termination resistors on the board tho.

[MaSTeR-StyX]

i hava a P4GPL-X too, and i need 2 more RAM-Slots ...

hm, i need a extra IDE-too,
BUT in BIOS there are 2 or 3 IDE found @ P4GPL-X !
so you dont need 2 fllash i think ... but thats not a problem.
the ide-controller supports only UDMA100, not UDMA133 ...
so i bought a pci-IDE controller 133 .....

please post some pics of your mod, THATS REALLY NICE ...
i dont know how i could connect a extra-ram slot ^^

PS:
sorry 4 my poor english

[skönnbrink]

Well well

Now i have tryed to flash to a P4gd1 bios, but i still can't find all memories @ boot. Anyone can understand why?

[memetcan]

skönnbrink I want to use my ddr booster with p4gpl-x
to which slot wou have soldered ddr1 slot ?

I have already made Vdimm 3.3 volt but this voltage is not enough for my bh5 Ineed 3.7 volts

[skönnbrink]

skönnbrink I want to use my ddr booster with p4gpl-x
to which slot wou have soldered ddr1 slot ?

I have already made Vdimm 3.3 volt but this voltage is not enough for my bh5 Ineed 3.7 volts

I have all slots soldered now, running 4*256 bh-5 with 3,3v

Also tryed my booster, and it semed to work fine. Else you can do the other Vdimm modd so u can go up to 5v. I had the booster in the slot closest to the ATX and IDE cable

Vdimm mod here http://www.xtremesystems.org/forums/...t=81795&page=5

[ibby]

u brave man!

I am impressed .. Picture my friend. .. pictures

[memetcan]

thnx my swedish friend I have missed Sweden very much...
I wish I waS at Möndal now

[skönnbrink]

Vdimm mod




Gonna take som pix of the backside. But i got some problems now, windows don't find the mems . Only cpu-z can read the SPD, gonna try flash back to a P4gpl-x bios and se what happens

[ibby]

you have done a good job,
iam impressed

[lawrywild]

you have done a good job,
iam impressed

me too!

I thought about doing this and the IDE mod too but then I just ended up selling my BH5 instead lol..

GJ!

[faba]

Nice job skönnbrink.

I would like to know whether the additional Mem-Slot is working now.
I've an p4gpl-x here and I like to solder.

greetz faba

[ADI7800]

Yeah, I want to do this mod too. Can you please upload some pics