Looking good mate. Here's a sneak peak of mine:
Im going to trading standards with this one company seriously ******* me around after over 4 weeks. Ordered the same bits from scan and aria today, and they have already despatched.
Ive gone for the new corsair Hx 520W psu over the probably not quite as stable tagan. Im about to set up my new rig thread with pics etc
Lol Dead
Looks awfully clean in there. Agreed no PCI-E in the GPU yet, but still.
Don't you just find it stupid where they put the audio cable for the optical drives?!?!?
It was a long road and one that is now over. Behold the updatedrig:
NEC MultiSync LCD20WGX2 20.1" Widescreen // Antec P182 GunMetal // OCZ StealthXstream 700w // Gigabyte EP45-UD3P //
Q9550 @ 3.44Ghz // Tuniq Tower 120 // Gainward GTX260 (896MB) @ 580/900 // 8GB OCZ PC2-8500C5 (OCZ2P10664GK) //
60GB OCZ Vertex 2 // 600GB WD VelociRaptor (WD6000HLHX)// 1TB Samsung Spinpoint F1 (HD103UJ) // RED Saitek Eclipse //
3x Sanyo-Denki 102.5cfm 120x38mm fan // 1x Delta 80cfm 80mm fan in modified 5.25" bay "Flipped" Sunbeam Rheobus //
1x Antec Tricool 120mm fan // 1x RED Akasa System Exhaust fan // RED Sunbeam Meteor lights // RED Razer Diamondback //
Ye a little too clean atm, but il try to hide every cable possible.
O b.t.w, spread the word to people to NEVER EVER USE www.westavon-systems.co.uk. Absolute pain in the
Lol Dead
Here's the last of the pics! - Until I upgrade again (maybe GPU card in the near future!)
MODDED OCZ 700w PSU:
The PSU opened up with new RED LED fan
In action with mod
In case w/ keyboard in front view too
FAN BAY MOD:
Packaging
With stock 80mm fan (which was a Yate Loon, but push barely any CFM)
With 80cfm Delta 80mm fan
Front of P180 with fan bay mod
Poor shot, but this is the finito look w/ modded Rhebous, PSU, keyboard and mouse.
It was a long road and one that is now over. Behold the updatedrig:
NEC MultiSync LCD20WGX2 20.1" Widescreen // Antec P182 GunMetal // OCZ StealthXstream 700w // Gigabyte EP45-UD3P //
Q9550 @ 3.44Ghz // Tuniq Tower 120 // Gainward GTX260 (896MB) @ 580/900 // 8GB OCZ PC2-8500C5 (OCZ2P10664GK) //
60GB OCZ Vertex 2 // 600GB WD VelociRaptor (WD6000HLHX)// 1TB Samsung Spinpoint F1 (HD103UJ) // RED Saitek Eclipse //
3x Sanyo-Denki 102.5cfm 120x38mm fan // 1x Delta 80cfm 80mm fan in modified 5.25" bay "Flipped" Sunbeam Rheobus //
1x Antec Tricool 120mm fan // 1x RED Akasa System Exhaust fan // RED Sunbeam Meteor lights // RED Razer Diamondback //
nice rig ya got there... congrats
Looking good
niiice
Intel Core i7 860 @4000MHz [1.35v] | Thermalright Ultra 120 Xtreme [lapped]+ 2x Scythe SlipStream 1.2K rpm | Asus Maximus III Formula | 2x2Gb Crucial Ballistix BL25664BN1608.16FF @ PC12800 8-8-8-24 1.65V | Zotac GeForce GTX280 1024mb @ 700/1400/2600 | OCZ Vertex 2 60GB SSD | 1000Gb Western Digital 10EADS | 4x 2000Gb Seagate Barracuda LP ST32000542AS | Creative Xtreme Music SB0460 | Genius 5.1 Professional Home Theatre | Vantec Nexus NXP-205 | Dell 2407WFP | Thermaltake Toughpower 750W XT [60A@12V] | Thermaltake Kandalf Silver + modding
Hey guys,
I'm new to this forum, and to building computers, so please bear with me. I just built my first rig, and it's got the e6600 processor and the Asus P5B deluxe mboard. I mistakenly tried to plug 3 IDE hard drives in at once, and it fried one of them. It had a lot of really important stuff on it, and I don't want the same thing to happen to the one that still works. Right now I have 1 80 gig hard drive plugged in, with 2 partitions. I recently bought 2 SATA hard drives. I don't think I need RAID, and one HD is half the size of the other anyway. Here is my question: How do I install the SATA hard drives without losing information on my IDE hard drive? Can they even work simultaneously? Thanks very, very much for your time guys.
you sould make your own topic in XtremeSystems Forums > Hardware > General Hardware > storageOriginally Posted by Skeltz
will do thanks
Posting Permissions
Reply With Quote
Bookmarks