Which Ones to Hit DDR1000 Cas 4?

[DeToNaToR.cl]

Well guys, I need some advice to choose memory for my conroe Rig (E6700 & Gigabyte DQ6)

For now I selected this stuff but Im still confused about which to choose..
Edit



Edit:

This: Supertalent T800UX2GC4
or: CORSAIR XMS2 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800
or
F2-6400PHU2-2GBHZ


Just looking for the Best oc memory, no care of looks, warranty or special features.

Greetings

[TV Addict#2]

I decieded on the g.skill PC2 5400's for a e6700 on 975x and big typhoon cooled
maybe add these to the list of possibles too:
http://www.zipzoomfly.com/jsp/Produc...80061-9&ps=ho4

[EsaT]

Newer F2-6400PHU2-2GBHZ (with Micron D9GMH) should do that well as long as you void the warranty and increase voltage over rating on sticker, there's lot of overclockings with those in Xtreme Bandwidth forum.
So if you keep warranties as overrated at least that G.Skill should do the job.

OCZ's warranty would cover up to 2.31V ("2.2V +/-5%") but I haven't seen what chips they use, Driver Heaven didn't look that or do more specific overclocking.

If you want to stay inside warranty and can find OCZ 7200 Platinums for that price those should do it easily inside warranty.
http://www.virtual-hideout.net/revie...0/index3.shtml
http://www.overclockersonline.com/in...num=397&pnum=3
I got those OCZs for near same price as G.Skills would have been but don't yet have all parts ready and might not have time to start assembling new PC for couple days.

[DeToNaToR.cl]

I dont have warranty cares

[freecableguy]

OCZ will hit DDR-1000 CAS4 with ease.

[Cooper]

F2-5400CL3D-2GBGA or F2-6400PHU2-2GBHZ

Both should do it easily and are the cheapest on the list.
Somebody told here that GA series has GKX chips. HZ series has GMH.

[anodynejd]

DDR1000 ? wouldn't it be DDR2 1000 ? I was unaware of any DDR that would run at 500fsb!

[DeToNaToR.cl]

F2-5400CL3D-2GBGA or F2-6400PHU2-2GBHZ

Both should do it easily and are the cheapest on the list.
Somebody told here that GA series has GKX chips. HZ series has GMH.

5400-GAs are very tempting but no one here has tested those sticks so not 90% sure too reach DDR21000 with nice latencies

Teamgroups 667-C3 are also very cheap (255usd) and they have a lot of user recomendations.

Any other picks?

[AndrewZorn]

my team xtreem 667 is hitting 1000 at 4-4-4-4 right now (i think it will do it on less than the current 2.2v, too)

anyone know much about tras? i used to be doing 4-4-4-8, and found that 4-4-4-4 is stable too... i remember something about higher values being better sometimes... or should i jsut go as low as i can?

[DeToNaToR.cl]

my team xtreem 667 is hitting 1000 at 4-4-4-4 right now (i think it will do it on less than the current 2.2v, too)

anyone know much about tras? i used to be doing 4-4-4-8, and found that 4-4-4-4 is stable too... i remember something about higher values being better sometimes... or should i jsut go as low as i can?

For Super Pi higher tras sometimes is better... 2-2-2-5 vs 2-2-2-11 = better 2-2-2-11

[AndrewZorn]

what about in general though, like besides superpi

some sort of math where add CAS and precharge +2 should be minimum tras or soemthing liek that

update: 4-4-3-4(-2!)
4 is lowest tras the board will allow
all stable too

[DeToNaToR.cl]

what about in general though, like besides superpi

some sort of math where add CAS and precharge +2 should be minimum tras or soemthing liek that

update: 4-4-3-4(-2!)
4 is lowest tras the board will allow
all stable too

Really Nice what vdimm?

PD: Anyone ever tested G.Skill PK?

[camouflage]

This one:

http://www.xtremesystems.org/forums/...d.php?t=116399

[FLMJIGGY]

go to the source. Ballistix. they should do that with no problem. I have a pair but really haven't tested them 100%.

[thunderstruck!]

My Gskill 6400HZ do 1100 C4 with 2.4v stable. Does 1000 with only 2.2v

[Moonraker™]

Geil Ultra DDR2-800mhz (the "Racing Orange" heatsink ones) will do 1150MHz at CAS4-4-4-4 timings with just 2.2v.

[AndrewZorn]

Really Nice what vdimm?

PD: Anyone ever tested G.Skill PK?

2.2v or less
i only say that because i see no point in lowering it when 2.2v is still under warranty and it isnt getting hot
orthos stable but of course

[DeToNaToR.cl]

This: Supertalent T800UX2GC4
or: CORSAIR XMS2 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800
or
F2-6400PHU2-2GBHZ

Which one got the best ICs on them?

[uOpt]

I had the Supertalent DDR2-1000 and it did that very well without much fiddling (had to sell it to go more than 2x1 GB).

[DeToNaToR.cl]

Bought the HZ
thx to everyone that helped

[toledo]

This: Supertalent T800UX2GC4
or: CORSAIR XMS2 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800
or
F2-6400PHU2-2GBHZ

Which one got the best ICs on them?

I've tested the Supertalent Kit agaist my old Corsair 5400UL both at 2.3v

At 2.3v Supertalent was not able to keep DDR2-1000 4-3-3-8 , but the UL's does ........ 4x512