FW 85.96_mod for SLi on any chipset

[theteamaqua]

ummm, here:
http://service.futuremark.com/orb/pr...ojectId=484864

is 8626 a good score for 3dmark06??

[rpg711]

ummm, here:
http://service.futuremark.com/orb/pr...ojectId=484864

is 8626 a good score for 3dmark06??

thats for no sli?
amazing...
more than x1900xtx
wow!!
gj

[theteamaqua]

no its SLIed ... unfortunely

http://service.futuremark.com/compare?3dm06=484864

E6400 2.77GHz ... badaxe's IDT clock gen bug 30% OC only ...

GeForce 7800GTX SLI

[rpg711]

no its SLIed ... unfortunely

http://service.futuremark.com/compare?3dm06=484864

E6400 2.77GHz ... badaxe's IDT clock gen bug 30% OC only ...

GeForce 7800GTX SLI

lol i thought it wasnt sli... i was like almost gets to x1900xtx crossfire (10k i think

[banias_bao]

it doesn't work on P5B, just tried

[Big_Sam]

it doesn't work on P5B, just tried

http://www.xtremesystems.org/forums/...hlight=SLi+965

[JacobF]

So... is there any chance for Quad SLI support on Intel chipsets?

[Anemone]

No one knows Jakup.

[Natalia]

When I open up a Maple 10 and begin to do computations, as I am working on it some of the text begins to "vanish" randomly. It is still there, I can highlight it and see it, but then other pieces of text will disappear as well. If I cut and paste the text from the editor window over to notepad, everything is there. The math computes just fine, but it is very difficult to work when numbers and information a few lines up keep vanishing from view. Even some text in the menu bars and pull down menus vanish in and out of view. I also seem to be getting the same issue with BlueJ, which I installed a few weeks after Maple.

I asked MapleSoft and they think it might have something to do with Java and my video drivers... anyone have any idea?

[y0bailey]

i had this problem with my CPU not being completely stable. It would pass prime95 and all that, but i would lose blocks of text. I ended up giving the CPU more voltage and the problem never happened again. it was weird

(this didnt just happen once, it happened all the time until i raised vcore)

[theteamaqua]

this rocks like KISS Army, my 975xbx can do sli now big thanx big sam

[Methylphenidate]

Thanks all. I haven't done any 3D benching yet, but I seem to have both cards working at the same time and SLI enabled. Required me to do a manual install of the drivers instead of using the setup utility, and I also have to use the bottom card, but whatever, if it works it works. Thanks so much!

[banias_bao]

http://www.xtremesystems.org/forums/...hlight=SLi+965

it works now,but needs some special bios settings?if i set fast,then windows crash 1min after boot in

[BulldogPO]

Big Sam:
Have you edited nv4_disp.inf for 7950GT ant 7900GS yet?

[Big_Sam]

Big Sam:
Have you edited nv4_disp.inf for 7950GT ant 7900GS yet?

http://steffbard.com/drv_01/nv4_disp.zip

NVIDIA_G71.DEV_0290.1 = "NVIDIA GeForce 7900 GTX"
NVIDIA_G71.DEV_0291.1 = "NVIDIA GeForce 7900 GT/GTO"
NVIDIA_G71.DEV_0292.1 = "NVIDIA GeForce 7900 GS"
NVIDIA_G71.DEV_0295.1 = "NVIDIA GeForce 7950 GT"

[webwilli]

many thx

now we need two 7950 GT...

[rpg711]

many thx

now we need two 7950 GT...

any1 have any news on 7950gt and 7950gtx?
is there a gtx?

[jcmiro]

OK i installed the drivers (85.96 hacked) for the card then rebooted added second card attached brdge turned on installed the driver for second card, rebooted, enabled sli bridge rebooted.....ran 3dmark06 and three games and Im getting great scores but there is these red bands that come accross the screen and turn the screen almost entirely red....the cards are not artifacting...I increased and decreased clocks to no avail...I tested the cards separately and they both work fine.....I ran drivercleaner and installed the cards fresh three times, and still I get the red banded stuff....only when I run in SLI mode....any thoughts....I even switched back to an old lcd I had and still red crap everywhere...

[revenant]

Any word on getting a hacked forceware 91.33 or something which supports quad sli for conroe + dual 7950gx2 goodness? just curious.. anyone know where to get the uli patch? seems most traces of it have been removed.. I wonder why?? lol. anyways..

[cloudwinds]

Hi!

I have been trying to setup my two msi 7600GT with Asus flexible SLI Bridge on my Intel 975bx board. No matter how i tried, i can only see one card. I cannot turn on the sli function in the advance properties setup. I took out and use the driver clean to clear off the drivers and then put in the card one by one and still the same. Can anyone here who has the intel 975bx board advice me on the setup procedure of ur sli setup. Btw, i run my e6300 at default mode. No overclocking.

Thanks

Regards

CW

[specv]

i was really close to doing SLI with 2 7960gt's. But after reading this thread im gonna do CF instead. x1900xt 256 or a x1900xtx, for only $70 the xtx seems like a better deal

[The Nemesis]

OK i installed the drivers (85.96 hacked) for the card then rebooted added second card attached brdge turned on installed the driver for second card, rebooted, enabled sli bridge rebooted.....ran 3dmark06 and three games and Im getting great scores but there is these red bands that come accross the screen and turn the screen almost entirely red....the cards are not artifacting...I increased and decreased clocks to no avail...I tested the cards separately and they both work fine.....I ran drivercleaner and installed the cards fresh three times, and still I get the red banded stuff....only when I run in SLI mode....any thoughts....I even switched back to an old lcd I had and still red crap everywhere...

Are you using the asus flex bridge?

[Big_Sam]

Are you using the asus flex bridge?

SLi will work without the SLi-bridge.

Hi!

I have been trying to setup my two msi 7600GT with Asus flexible SLI Bridge on my Intel 975bx board. No matter how i tried, i can only see one card. I cannot turn on the sli function in the advance properties setup. I took out and use the driver clean to clear off the drivers and then put in the card one by one and still the same. Can anyone here who has the intel 975bx board advice me on the setup procedure of ur sli setup. Btw, i run my e6300 at default mode. No overclocking.

Thanks

Regards

CW

If you see in system only one card, your problem not in the driver.
You can install any other driver and be convinced of it.
I repeat once again, it is not necessary SLi-bridge for SLi work, SLi will work without it but only more slowly.

i was really close to doing SLI with 2 7960gt's. But after reading this thread im gonna do CF instead. x1900xt 256 or a x1900xtx, for only $70 the xtx seems like a better deal

Good choice.
Only do not regret about it then.

[cloudwinds]

hi.

im using asus flex bridge. anyway, im going to delete my win xp n reinstall the xp again n then install the driver again. do i install one card by one card or put two card in one time? really appreciate if u could advice on this.

thks.

regards cw

SLi will work without the SLi-bridge.



If you see in system only one card, your problem not in the driver.
You can install any other driver and be convinced of it.
I repeat once again, it is not necessary SLi-bridge for SLi work, SLi will work without it but only more slowly.



Good choice.
Only do not regret about it then.

[Big_Sam]

hi.

im using asus flex bridge. anyway, im going to delete my win xp n reinstall the xp again n then install the driver again. do i install one card by one card or put two card in one time? really appreciate if u could advice on this.

thks.

regards cw

There is no difference how to install cards.
I always install both cards simultaneously.
To install cards one by one - more time will demand.