MMM
Page 14 of 19 FirstFirst ... 411121314151617 ... LastLast
Results 326 to 350 of 454

Thread: A64Info - New CPU ID and memory tweaking tool! - feedback welcome...

  1. #326
    Xtreme Member
    Join Date
    Sep 2005
    Location
    Belgrade, Serbia
    Posts
    192
    Quote Originally Posted by Praz
    For the majority of processors it can be assumed that the thermal sensor, if not totally accurate, is closer to being correct then the thermal diode.
    Praz, 10x for good explanation.
    Asus P8Z77-V DELUXE + i7-3770K @ 4.6GHz + Noctua NH-D14
    4x4GB Patriot Viper Xtreme Series, Division 2 Edition @ 2133MHz 11-11-11-30-1T
    MSI N570GTX Twin Frozr II/OC

  2. #327
    Xtreme Addict
    Join Date
    Feb 2006
    Location
    Potosi, Missouri
    Posts
    2,296
    Quote Originally Posted by lukija
    Well, I allready told that, you should use specialised SW like MBM, SpeedFan whatever. This is just infromational, I think I will remove it becuase it brings only confusion.
    A64Info is evolving into a must have program. It is now to the point of replacing most other single purpose programs. I think at times we fail to convey how appreciative we are of your hard work. But please, reconsider removing the thermal sensor information. Those that believe the thermal diode is more accurate can just ignore it. Or how about the possibility of including the diode along with the sensor reading.

    Thanks

  3. #328
    Xtreme Member
    Join Date
    Dec 2004
    Posts
    455
    yeah..thanx too from me because this is an excellent tool !

    Regarding the thermal sensor(s): Interesting info there, i couldnt get any clear information in the whitepapers regarding what's the preferred way to read temps...but praz is definitly right. However, i think that the majority of end-users use the thermal diode/mbm/speedfan method.

    lukija, did you get the FID/VID working now ?
    Q6600 g0 L741 1.4V@35xx-> 8x44x FSB - 5:6 333/800- 2x2gb OCZ XTC Plats@53x mhz - dfi lp X38 TR2, Ultra Xtreme 120 - W7 64Bit - NV GTX275 - Corsair 520 (blew up) -> Toughpower 750W

  4. #329
    Xtreme Member soundx98's Avatar
    Join Date
    Dec 2002
    Location
    Cantundastan, Wisconsin
    Posts
    287
    I'd like to extend my thanks for all your work on the program.
    Definately a must have for me.
    Wonderful to see you and Vitaliy sharing information.

    Quote Originally Posted by Praz
    But please, reconsider removing the thermal sensor information
    I have to agree 100%.
    The readings obtained are from two different sources using different methods.
    While they may be very close at Idle there can be a large difference under load.
    And while the accuracy of either method can be questioned, please leave it in the program as it is an extremely useful tool.

    I find MBM5 almost a necessity due to it's configurability and use in/with other programs (WebTemp, LCDC, LCD Smartie, MBM5 log, etc). The ability to calibrate/compensate voltages and temps is a nice touch for me. But there are many who don't like the program or bother setting it up. To each his own.

    ITE SmartGuardian, Speedfan, Everest, and NextSensor (all except the latest Everest are FREE) are also great programs. While I prefer VVJ's NextSensor program, others may prefer the GUI or featureset of another program.

    As new boards are introduced with many using newly introduced sensors (ITE IT8716F on the AMD M2 boards instead of the older IT8712F) MBM5 may not be able to be used and using the CPU's internal sensor (A64 Info, Core Temp, NextSensor, Everest) may be the only way. Vista (whether you like it or not) will become mainstream over the next 12-24 months and those using the 64-bit Final version may find themselves UNABLE to use any of the programs that DO NOT have a "signed driver".

    KEEP THE THERMAL SENSOR INFO IN

    My apologies if I have gone too far off topic but for those that prefer Johnny Lee's SP2004 to Prime 95 he is working on a new Beta for 64-bit based on P64v2414 that now dispalys the sensor info from MBM5.

    your doing Great Work lukija, keep it coming

    some pics in Vista x64






  5. #330
    Registered User
    Join Date
    May 2006
    Location
    France
    Posts
    14
    Brilliant this software! I added it on my site

    >> http://www.nokytech.net/telechargement-a64_info-92.html

  6. #331
    100% Load 24/7
    Join Date
    Mar 2005
    Location
    Seattle
    Posts
    1,495
    Great job once again lukija I also will encourage you to leave in the temp monitor, very nice addition.
    Main Rig
    i7 2600k l Asus P8P67 l 2x2gb Gskill l GTS450 l Venomous X l XClio 680

  7. #332
    Registered User
    Join Date
    Jul 2006
    Posts
    5
    Can anyone tell me what that "disable jitter" does?
    And to the author, A64info .61 reports that my cpu voltage is 1.425v while my vcore is 1.525v in the bios. I run a winchester 3200+ @ 2.5GHz, for reference. Of course, I understand that this is beta.

  8. #333
    Registered User
    Join Date
    Jul 2006
    Posts
    5
    *bump*
    anyone?

  9. #334
    Registered User
    Join Date
    Jul 2006
    Location
    Serbia
    Posts
    22
    it acquired me some time to find this info for you :

    'When set the DDR compensation circuit will not change values unless the change is more than one step from the current value. This bit should be set
    for all revision E and later processors'

    so, if u have rev.E processor, like me, don't touch it, live it checked.
    LP DARK P35-T2*C2D 2180@3GHz*moded 745 WC*2x1024 AXE @1GHz 4-4-4-8 2.25v*Leadtek PX9600GT@780/2000*Audigy1@KX*WD1600AAJS-00B4A0, 6Y080L0*Pioneer DVR-111D@111L+MCSE**LC 6550 Black*CX-03B-B-AW-OP moded

  10. #335
    Registered User
    Join Date
    Jul 2006
    Location
    Maryland, USA
    Posts
    77
    Quote Originally Posted by lukija
    Ok, new version, 0.62 beta:

    http://avala.yubc.net/~lukija/A64Info-beta.exe
    ...
    When I click this link, I get 0.61?
    DFI Lanparty UT DFI Lanparty UT X48-T3RS, Rev AA1, BIOS: 10/15/08
    Intel Core 2 Quad Q9650 @4005MHz (work in progress), Sunbeamtech Core-Contact-Freezer (Air!)
    4G OCZ Reaper HPC DDR3 1800 @400/1333 (work in progress)
    eVGA 7900 GT KO RoHS, Zalman VP900CU Cooling
    SilverStone Decathlon DA1000
    Areca RAID ARC-1220 Raid 5 -- 1.2 TB
    (+2 DVD Drives, a few odd SATA drives, and a Hauppauge TV Card)

  11. #336
    Xtreme Member
    Join Date
    Jan 2005
    Location
    No(r)way
    Posts
    452
    Cheers! This seems like a great tool, but i cannot get it to work properly on one of my computers, both 0.50 and 0.61beta tested. Specs:
    DFI NF4 Ultra -D
    Windows 2000 sp4
    AMD 64 3000+ (Venice E4) @314x9
    The 0.50 shows completely wrong info, while i cannot even get the 0.61beta to open, it simply says "error loading driver".
    Attached Images Attached Images
    Obsolescence be thy name

  12. #337
    Xtreme Member
    Join Date
    Apr 2006
    Location
    Belgrade, Serbia
    Posts
    187
    Quote Originally Posted by Frodin
    Windows 2000 sp4
    The 0.50 shows completely wrong info, while i cannot even get the 0.61beta to open, it simply says "error loading driver".
    In order for the driver to load your user account must have administrative priviledges. Also check that your local or global security policy does not prevent loading and unloading device drivers. If that doesn't help and you can't or won't use Windows XP I guess you are out of luck.

  13. #338
    Registered User
    Join Date
    Jul 2004
    Location
    by -=Merlin=-
    Posts
    62
    Quote Originally Posted by lukija
    You may try new version of A64Info (still not tested fully). I have updated it so it supports ODC,dividers greater than 200 (beware, it may freeze your rig). Also, one can set it even if BIOS lacks this option (ODC). So far it's tested on Venice. Any feedback is wellcome.

    Version 0.5
    http://avala.yubc.net/~lukija/A64Info.rar

    Version 0.61 (beta)
    http://avala.yubc.net/~lukija/A64Info-beta.exe

    Some screenshots:

    Case 1 - multi 9, memclk 200, ODC off -> divider 9
    Case 2 - multi 9, memclk 200, ODC on -> divider 10
    Case 3 - multi 9, memclk 180, ODC off -> divider 10


  14. #339
    Xtreme Legend
    Join Date
    Oct 2005
    Location
    Austria
    Posts
    863
    thx for v0.61 lukija. it works great so far

  15. #340
    Registered User
    Join Date
    Jul 2006
    Posts
    5
    Quote Originally Posted by emaniac
    it acquired me some time to find this info for you :

    'When set the DDR compensation circuit will not change values unless the change is more than one step from the current value. This bit should be set
    for all revision E and later processors'

    so, if u have rev.E processor, like me, don't touch it, live it checked.
    Thank you so much for finding that info.
    But I am not very good at this thing. I have a 3200+winchester (rev DH8-D0). So, can I or can I not check the 'disable jitter' checkbox? It seems to affect stability only AFA I can tell, and since I run stable now I don't think it's required.

  16. #341
    Registered User
    Join Date
    Jul 2006
    Location
    Serbia
    Posts
    22
    welcome.
    then leave it as is. lukija knows better then me. ask him if must know for sure.
    LP DARK P35-T2*C2D 2180@3GHz*moded 745 WC*2x1024 AXE @1GHz 4-4-4-8 2.25v*Leadtek PX9600GT@780/2000*Audigy1@KX*WD1600AAJS-00B4A0, 6Y080L0*Pioneer DVR-111D@111L+MCSE**LC 6550 Black*CX-03B-B-AW-OP moded

  17. #342
    Registered User
    Join Date
    Sep 2006
    Posts
    1
    for those who have a very restricted motherboard (unable to set vcore in bios), is it possible to make this program such that it can set the vcore higher than the "maximum" found, which i know is definately not the maximum the cpu can do.

  18. #343
    Xtreme Enthusiast
    Join Date
    Apr 2005
    Posts
    894

    well 0.5 on vista rc1 is too much ?

    despite that i think bugs are the same as xpsp2?

    Gaming: SaberThooth X79,3930k,Asus6970DCII_Xfire,32gb,120OCZV3MaxIOPS, ThermaTake Chaser MK1
    HTPC:AMD630,ATI5750,4gb,3TB,ThermalTake DH103
    Server: E4500,4GB,5TB
    Netbook: Dell Vostro 1440

  19. #344
    Xtreme Enthusiast
    Join Date
    Apr 2005
    Posts
    894
    0.6 won't even work says error loading driver.

    and i'm admin .
    Gaming: SaberThooth X79,3930k,Asus6970DCII_Xfire,32gb,120OCZV3MaxIOPS, ThermaTake Chaser MK1
    HTPC:AMD630,ATI5750,4gb,3TB,ThermalTake DH103
    Server: E4500,4GB,5TB
    Netbook: Dell Vostro 1440

  20. #345
    Registered User
    Join Date
    May 2006
    Posts
    4
    Just wanted to say "thanks" - for all the hard work and constant innovation on this program. It also takes time and effort to read forums like this and respond to ongoing questions and problems, and for that, I applaud you.

    Also wanted to say that, like many others, this program is a "must-have" for me on my Neo2 board... With a lack of RAM timing options available in the BIOS, and the inability to boot with certain (otherwise stable) dividers, this program now loads everytime I run windows.

    ...And as soon as you enable FSB overclocking in the settings window, I can get rid of Clockgen!

    Peace

    P.S. Also, as a suggestion - how about adding a startup 'bypass' key which allows one to bypass startup settings like the nVidia overclocking utility? Would make recovering from failed settings a bit easier (hasn't happened yet, but who knows?).

  21. #346
    Registered User
    Join Date
    May 2006
    Posts
    4
    Eeek, sorry, dbl post

  22. #347
    Registered User
    Join Date
    Dec 2004
    Posts
    21
    Any good ??? hmmmmm
    Attached Images Attached Images
    ASUS A8R32-MVP Deluxe - AMD FX 57@3Ghz 24/7 - ATi X1900CF, X1900XTX - ASPIRE PSU 680W - WD Raptor x2 74G 10K RAID 0 - GSkill DDR500 2G - ViewSonic n2750w LCD HDTV WideScreen 8ms - Win XP Pro X64

    http://service.futuremark.com/compare?2k3=4832895 03 30000+

  23. #348
    Xtreme Enthusiast
    Join Date
    Jun 2006
    Location
    COLORADOOOOO
    Posts
    541
    are the volts for cpu maxed at 1.55 for everyone? casue in bios i can do 1.8 max.. so please tell me whats up...

  24. #349
    Registered User
    Join Date
    Jun 2006
    Posts
    13
    Great program, I've just downloaded it.

    I noticed however that I can choose any multiplier up to 25x on my X2 3800+, just before I try it to find it won't work, I won't destroy anything will I?

    Everything else seems to be working perfectly, cool prog!

    Edit: Don't worry, I just tried, to learn it just resets to the largest multiplier possible.

    On another note, is the voltage change pretty safe? Any reports of problems with it?
    Last edited by Tictac2; 09-22-2006 at 12:32 PM.

  25. #350
    Registered User
    Join Date
    Jul 2006
    Location
    Maryland, USA
    Posts
    77
    Quote Originally Posted by JamesBong420
    are the volts for cpu maxed at 1.55 for everyone? casue in bios i can do 1.8 max.. so please tell me whats up...
    It maxes at 1.55v here also and my BIOS goes quite a bit higher, but with DFI, I can also set VID Special -- a value that multiplies VID to get the actual Vcore. I have mine set for 144.4 (14.4% increase) so I can get quite a bit more than the 1.61 that I run when at my max OC. I've read that other MBs can be set to add an offset (200mv).
    DFI Lanparty UT DFI Lanparty UT X48-T3RS, Rev AA1, BIOS: 10/15/08
    Intel Core 2 Quad Q9650 @4005MHz (work in progress), Sunbeamtech Core-Contact-Freezer (Air!)
    4G OCZ Reaper HPC DDR3 1800 @400/1333 (work in progress)
    eVGA 7900 GT KO RoHS, Zalman VP900CU Cooling
    SilverStone Decathlon DA1000
    Areca RAID ARC-1220 Raid 5 -- 1.2 TB
    (+2 DVD Drives, a few odd SATA drives, and a Hauppauge TV Card)

Page 14 of 19 FirstFirst ... 411121314151617 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •