What is the stock vcore for the e6600

**kschaffner** · 08-24-2006, 05:21 PM

I have gone through 30-40 threads and people only state that it is at stock but don't post the actual voltage. Thanks. Kaleb

**AndrewZorn** · 08-24-2006, 05:25 PM

if this werent on the internet id tell you to look it up on the internet
but since this IS on the internet
im wondering if you even know about google

**bugeyes** · 08-24-2006, 05:53 PM

It's a legitamate question, google turns up

with regards to this subject.

When I set vcore to Auto in my P5B-D at stock clock, cpuz and asus probe report a vcore of 1.280 volts, but when I set vcore manualy, I need to set it to 1.325v for CPUz and probe to report the same 1.280v?

Since on the retail box 1.35 volts is stated to be MAX Vcore my reasoning sugests anywhere between 1.275 to 1.350 volts to be stock.

**aggybong** · 08-24-2006, 05:57 PM

It could be your motherboard simply undervolting, though. I always assumed the 1.35v MAX on the CPU box was accurate, and that they only added "MAX" for when it isn't in a speedstepped\c1e state.

**AndrewZorn** · 08-24-2006, 06:19 PM

googling "e6600 voltage intel", the #1 result is a wikipedia article stating 1.34v. doesnt the box also say the voltage range?

**kschaffner** · 08-24-2006, 06:44 PM

The box states 1.35 max but I looked for a long time on google using e6600 stock vcore with and without quotes and couldn't find 1 page telling me what it is. I did find out on another forum that it is indeed 1.3250.

**Vric** · 08-24-2006, 06:44 PM

Box Say 1.35V Max. (nothing more) But I'm not sure it's the "auto" setting. Either 1.30V or 1.35V, I will have to test to be sure. (since it's hard to know with Vdrop)

**kschaffner** · 08-24-2006, 06:55 PM

That note aside temporarily I have some problems with my rig more details here. http://www.xtremesystems.org/forums/...d.php?t=113002

**MonkSP** · 08-25-2006, 01:19 AM

But if you ask intel, you can feed 1.5v without risking CPU integrity.

**~~gundersausage~~** · 08-25-2006, 01:34 AM

CPU-Z says 1.4V when I'm set to default???

**vintage_guitar** · 08-25-2006, 01:39 AM

Originally Posted by gundersausage

CPU-Z says 1.4V when I'm set to default???

cpuz doesn't report conroe correctly yet

**dinos22** · 08-25-2006, 01:43 AM

Originally Posted by gundersausage

CPU-Z says 1.4V when I'm set to default???

if you are on the latest bios you are seeing Auto bios vcore increase to compensate for the OC

from 3xdifferent CPUs so far they've been 1.325 and 1.285