I have gone through 30-40 threads and people only state that it is at stock but don't post the actual voltage. Thanks. Kaleb
I have gone through 30-40 threads and people only state that it is at stock but don't post the actual voltage. Thanks. Kaleb
if this werent on the internet id tell you to look it up on the internet
but since this IS on the internet
im wondering if you even know about google
i7 2700k 4.60ghz -- Z68XP-UD4 F6F -- Ripjaws 2x4gb 1600mhz -- 560 Ti 448 stock!? -- Liquid Cooling Apogee XT -- Claro+ ATH-M50s -- U2711 2560x1440
Majestouch 87 Blue -- Choc Mini Brown -- Poker Red -- MX11900 -- G9
It's a legitamate question, google turns upwith regards to this subject.
When I set vcore to Auto in my P5B-D at stock clock, cpuz and asus probe report a vcore of 1.280 volts, but when I set vcore manualy, I need to set it to 1.325v for CPUz and probe to report the same 1.280v?
Since on the retail box 1.35 volts is stated to be MAX Vcore my reasoning sugests anywhere between 1.275 to 1.350 volts to be stock.
It could be your motherboard simply undervolting, though. I always assumed the 1.35v MAX on the CPU box was accurate, and that they only added "MAX" for when it isn't in a speedstepped\c1e state.
googling "e6600 voltage intel", the #1 result is a wikipedia article stating 1.34v. doesnt the box also say the voltage range?
i7 2700k 4.60ghz -- Z68XP-UD4 F6F -- Ripjaws 2x4gb 1600mhz -- 560 Ti 448 stock!? -- Liquid Cooling Apogee XT -- Claro+ ATH-M50s -- U2711 2560x1440
Majestouch 87 Blue -- Choc Mini Brown -- Poker Red -- MX11900 -- G9
The box states 1.35 max but I looked for a long time on google using e6600 stock vcore with and without quotes and couldn't find 1 page telling me what it is. I did find out on another forum that it is indeed 1.3250.
Box Say 1.35V Max. (nothing more) But I'm not sure it's the "auto" setting. Either 1.30V or 1.35V, I will have to test to be sure. (since it's hard to know with Vdrop)
Rig : Core 2 Duo E6600 | Scythe Mine | 2x 1gb OCZ PC2-6400 Platinum XTC | Asus P5B Premium Vista Edition| eVGA 8800GTS 320Mb | 1x Seagate 80gb SATA2 2x 250gb WD SATA2 SE16 Raid0 | SB X-Fi | OCZ GameXstream 600W | Silverstone TJ06 case
That note aside temporarily I have some problems with my rig more details here. http://www.xtremesystems.org/forums/...d.php?t=113002
But if you ask intel, you can feed 1.5v without risking CPU integrity.
Testing Rig
Lian Li PC-S80
Enermax Liberty 620W
Asus P5K
Conroe E6600
2Gb OCZ PC8500 - @650 Club
BFG 8800GTS 320Mb
2xSamsung 80Gb SATA II Raid 0
1xSeagate 320Gb SATA II 16Mb
Pioneer DVR 110-D
Water Cooled (MCP655-Storm-Maze4gpu-BIX-1/2tubing)
CPU-Z says 1.4V when I'm set to default???
cpuz doesn't report conroe correctly yetOriginally Posted by gundersausage
if you are on the latest bios you are seeing Auto bios vcore increase to compensate for the OC
from 3xdifferent CPUs so far they've been 1.325 and 1.285
Where did you get this from?
...
Mine reports my e6600 anywhere from 1.14v to 1.34v depending on CPU usage.
Use everest Ultimate edition. It tells you the stock vcore
Mine is 1.325v
Core 2 Quad Q6600 @ 3GHz . DFI DK P45-T2RS Plus . XFX 9800GT 512MB . 8GB OCZ Blade PC2-9200 . WD6400AAKS AHCI .
Creative X-Fi XtremeMusic . Hanns.G 28" LCD . Thermalright U120-E . Seasonic S12 600w . Windows 7 Professional E Retail x64 .
1.14v -1.18v its in Idle and if you have EIST enable , but the Conroe Default Vcore its 1.325v
regards
Last edited by mascarilha; 08-25-2006 at 04:13 AM.
Core2 DUO E6400@ 3500mhz @ 1.50v // Gigabyte DS3 // Connect3D X1800XT 512Mb @ 700/800 @ Stock voltage//2x1Gb TeamGroup DDR2 PC2-5300>>>>> (ALL Watercooled by Aquacomputer)<<<<
Bookmark this site: http://users.erols.com/chare/elec.htm#intel
Stock volts are not 1.2v.....
Core 2 Quad Q6600 @ 3GHz . DFI DK P45-T2RS Plus . XFX 9800GT 512MB . 8GB OCZ Blade PC2-9200 . WD6400AAKS AHCI .
Creative X-Fi XtremeMusic . Hanns.G 28" LCD . Thermalright U120-E . Seasonic S12 600w . Windows 7 Professional E Retail x64 .
Posting Permissions
Reply With Quote
Bookmarks