ASUS P5B-Deluxe; Problems & Fixes

[GAR]

you kno what, i think the g.skill ram has an issue with other dividers, 1.1 worked much better and was more stable, my sandra bandwidth with 500mhz was 6900, with 400mhz 1:1 dividers my bandwidth now is 7300, anyone else get this, problem with this setup........i got my system to prime at 3.6ghz 400x9 the reason it wasnt posting was because of the ram dividers, so anyone with g.skill hz 2gb set and this board should stick to 1:1 dividers, ill report any other issues or problems i run into. so far my system is running like this

3.6ghz @ 1.500v in bios, 1.42 in windows
400x9 mem 1:1 divider....ddr800 @ 4-4-4-6-2-20-10-10-10-10-faster
mem 2.3v
cpu 1.5000
fsb 1.300
nbvcore 1.250
auto
auto

[Chri$ch]

i have only problems with 4:5 divider (wont boot over 480Mhz ram!), but 2:3 & 3:5
work without problems (boot with 615Mhz ram!).

Processor: E6300
Bios Revision: 0507
Memory: G.Skill 6400HZ
Configured Voltages: 1.45v vCore, 1.40v vFSB, 1.25v vNB, 1.70v vSB
Configured FSB:486
Configured Ratio: 1:1
Configured Memory Timings: 4-4-4-8