Biostar TForce P965 Deluxe - 530FSB 1:1 4-4-3-4

**Lestat** · 08-18-2006, 10:00 AM

yeah just let others be the guinea pigs lol.
if you look above these guys aint getting close to 400mhz FSB
maybe its just one or two guys but still..

we'll have to wait and see what happens.

spekaing of prices did you guys see those a$$holes at newegg raised the price of the P5W DH another 10 bucks. its now 259.99 it was 249.99

**Shrekogre** · 08-19-2006, 04:34 AM

Originally Posted by Lestat

yeah just let others be the guinea pigs lol.
if you look above these guys aint getting close to 400mhz FSB
maybe its just one or two guys but still..

we'll have to wait and see what happens.

spekaing of prices did you guys see those a$$holes at newegg raised the price of the P5W DH another 10 bucks. its now 259.99 it was 249.99

then i'm not going to share my results with you. just j/k

I was previously walled on 366 fsb. but after changing the NB HSF to this,
http://www.thermaltake.com/product/C...4/cl-c0034.asp

i can get this

i still can post at 422x9, but can't boot into windows. i guess my cpu is limiting me.

**Pjoeloe** · 08-21-2006, 10:00 AM

No more results with this board ?

**DaWaN** · 08-21-2006, 12:56 PM

Originally Posted by Pjoeloe

No more results with this board ?

I wished I had this board, postponed till september for me

**Pjoeloe** · 08-22-2006, 10:24 AM

biostar is a week closed ... nice....

**SF3D** · 08-22-2006, 12:09 PM

...

**Pjoeloe** · 08-22-2006, 05:43 PM

375 fsb ? that`s nog realy high....

...

Did you used memset and setfsb to see what latency`s are the best for your mem ? p965 chipset is very buggy,

I could not go higher than 9 x 400 on my ds3 and with memset and setfsb, I knew what the ideal settings were for my mem, changed them in de the bios and voila

**Shrekogre** · 08-22-2006, 10:22 PM

i could post at 422 fsb but i think my cpu cannot take it.

**coolice** · 08-23-2006, 12:55 AM

how to meansure vdimm from the coil nearest to ramslots?i put red clip on he coil and then where should i out my black clip?

and one more thing,im using stilt moded bios,when i set cl to 5 or 6,cpuz will show cl3

**Pt1t** · 08-23-2006, 01:11 AM

Originally Posted by coolice

how to meansure vdimm from the coil nearest to ramslots?i put red clip on he coil and then where should i out my black clip?

and one more thing,im using stilt moded bios,when i set cl to 5 or 6,cpuz will show cl3

Black on ground.

**coolice** · 08-23-2006, 06:38 AM

Originally Posted by Pt1t

Black on ground.

tried but not working..can post some pic when u measure?

**Pt1t** · 08-23-2006, 06:54 AM

There and ground.

**coolice** · 08-23-2006, 08:38 AM

thanks alot Pt1t..
anyone can solve the cl thingy prob?

**coolice** · 08-23-2006, 09:16 AM

as i followed wat stilt said..i mean the vmod..one side on 2-3 pins..another side put on ground..get 0.53v..=.="..how come?

**cluzoe** · 08-28-2006, 11:17 AM

EIST "speedstep" is Disabled your motherboard ???

**Pt1t** · 08-28-2006, 11:26 AM

Originally Posted by cluzoe

EIST "speedstep" is Disabled your motherboard ???

yes C1E via bios function.

**cluzoe** · 08-28-2006, 11:28 AM

Originally Posted by Pt1t

yes C1E via bios function.

thanks

**irenic** · 08-28-2006, 08:16 PM

hi, where can i find cpu multiplier option in bios?

**cluzoe** · 08-29-2006, 03:33 AM

my settings "EIST speedstep" Disabled in BIOS

**SF3D** · 08-29-2006, 03:53 AM

I got nice reply from Biostar support

...Dear Sir

Thanks for your update.

Basically , we won't guarantee that all brands memory can be run normally
on our mainboard because they use different memory chip...

**SynGroW** · 08-29-2006, 09:41 AM

Got my board today.

Results so far are not too bad. I can run up to 440MHz FSB with boxed air (multi 7x)

With a single-stager my max. FSB rises to 480~482MHz.

Concidered that my 200 euro Asus P5B Deluxe does 455MHz FSB boxed air and 490MHz FSB with SS then this 130 euro Biostar isn't bad at all

**DaWaN** · 08-29-2006, 11:43 AM

I have some severe problems with that VIA chip and my Pioneer DVD writer, so can't install windows right now. Is it possible to use IDE --> Sata convertor for a DVD burner ? And also this board doesn't boot with PC2-3200 sticks. I have 2x512mb PC3200 fatbody's doing 500mhz 4-3-2-8 easy but they don't boot. My AENEON PC2-4200 sticks died so can't use them either. Still i'm happy with this board because it does boot at 370 with my dead AENEON so i'm past that stupid wall on my 975X/G infinity. When I get the DVD writer working and another set of mem i'll defently let you know how this board goes !!

**cluzoe** · 08-30-2006, 04:27 AM

Originally Posted by SF3D

I got nice reply from Biostar support

...Dear Sir

Thanks for your update.

Basically , we won't guarantee that all brands memory can be run normally
on our mainboard because they use different memory chip...

damn nice

**kiwi** · 08-30-2006, 04:30 AM

SynGroW
What batch is it? L627 maybe? I am looking for L627, they seem to be the best retail chips, at least 6600

**DltdApS** · 08-30-2006, 06:17 AM

is it really a good mainboard with E6600 ES step5 ?

Thread: Biostar TForce P965 Deluxe - 530FSB 1:1 4-4-3-4

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions