My conroe E6600 - !!w00t!!

[sombrio]

hI! This is what i can get for 24/7 with my conroe.

config:

CPU - CONROE E6600
MOTHERBOARD - ASUS P5W DH DELUXE
BIOS - 1101
MEMS - TEAMGROUP 5300 (MICRON)

VCORE - V1.35 ON BIOS
VDIMM - V2.10

[bugeyes]

You claim that this is a 24/7 setting yet you only prime test for 30mins ?

[sombrio]

You claim that this is a 24/7 setting yet you only prime test for 30mins ?

Its enough!

[garnin]

You're better off running dual super-pi 32M than running small FFT's for 30 minutes, but neither really proves 24/7 stability.

[John600rr]

Thats pretty good, even for just 30 minutes. My 6600 would need 1.45+ VCore to run 30 seconds at his speed.

[grimREEFER]

up the vcore and let it run for 8 hours

[miochza]

Even 30 min, that is much better than my chip can do. My core would have to be 1.5v (at least) for 370 fsb.

[Brahmzy]

Thats pretty good, even for just 30 minutes. My 6600 would need 1.45+ VCore to run 30 seconds at his speed.

Even 30 min, that is much better than my chip can do. My core would have to be 1.5v (at least) for 370 fsb.

Same here!

[andyisc00l]

Its enough!

you should really bump the voltage up to 1.5v curious to see prime stable looks like a good chip

[Der_KHAN]

wow, i thought the 6600's would average much higher

[Drow]

Air or water cooling?

[sombrio]

Air cooling - Thermalright xp-90c + noiseblocker xe2.

[Durzel]

30 mins Prime doesn't mean anything, sorry.

[TL1000S]

30 mins Prime doesn't mean anything, sorry.

I disagree...
30min dual Prime means that the setup potentially is "24/7-stable", but may need better ventilation (aircooled in case).. or a slight bump of VCore to be verified 24/7-stable (at a given clock).

[sombrio]

My temps at 25 minutes of prime are:

Processor - 49º
Core 1 - 65º
Core 2 - 65º

2xSP20004 (30 minutes) + 2xSPI (32M) at the same time.

ONLY V1.35 VCORE IN BIOS

[anarinsk]

It has a real potential! Nice CPU

[berk]

Right,now stuff a max of 1.55v into that baby and see how sexy she is,stop :banana::banana::banana::banana::banana: footing.

[sombrio]

Right,now stuff a max of 1.55v into that baby and see how sexy she is,stop :banana::banana::banana::banana::banana: footing.

I dont want and i dont need to give more than v1.35 vcore. My cpu overclocks very well with low voltage

VALIDATION:
http://valid.x86-secret.com/show_oc?id=113421

[Mykou]

Can you tell which revision is your asus P5W dh please ?

Nice results indeed !and nice ram

I bet you could be dual prime stable 24/7 with at reasonable Vcore (1.40/1.42 )

I'm fine with that bios too , and dual prime stable with actual lower Vcore ( 1.48 vs 1.51v 4 days before )

[kimandsally]

Right,now stuff a max of 1.55v into that baby and see how sexy she is,stop :banana::banana::banana::banana::banana: footing.

Why give it volts if it doesn't need it? And with air cooling 1.55v is a bit high would it give you a thrill if he knackered it up following your stupid suggestion?

[matt1]

What week is your Conroe?

[sombrio]

What week is your Conroe?

Where i can see the week of the cpu?

[vintage_guitar]

Where i can see the week of the cpu?

read the actual serial number on the processor that starts with L6 for example.. a week 23 is L623 and a week 24 would be L624 and 25 would be L625 for the first 4 characters.

[berk]

Why give it volts if it doesn't need it? And with air cooling 1.55v is a bit high would it give you a thrill if he knackered it up following your stupid suggestion?

WTF Mr.Serious????

I was encouraging him to clock a bit more,not hurting/bashing/intimidating him in any way.Some have had great results with good air cooling and high-ish volts,albeit the temps have to be watched..is that ok with you???
Go away,just go away.

Good results so far,if your satisfied,fair enough.
sheesh.

[sombrio]

read the actual serial number on the processor that starts with L6 for example.. a week 23 is L623 and a week 24 would be L624 and 25 would be L625 for the first 4 characters.

Look at this. I guess you can see it in the box.