very costdown mobo, spent $58USD in taiwan
P5PE-VM
INTEL chipset，NB→865G，SB→ ICH5
Supported PENTIM D/PENTIUM 4/CELERON /C2D
supported HT及EIST
FSB/1066/800/533
Supported DDR1 266~400mhz dualchannel , max 2GB
865G , video chip→INTEL EXTREME GRAPHICS 2
PCI*3，AGP 8X*1
Sb→ICH5 ，two IDE ATA100/66，two SATA1
onboard sound chip：ADI HD
MARVELL GIGABIT network
max usb*4
yeah, in stock, my country.
Conroe +BH5?
"We are competing, competing to win. And the main motivation is to compete for victory" - Ayrton Senna
Originally Posted by over@locker886
yeah, in stock, my country.
Conroe +BH5?
and.......ths one
And...and.......ths one
So..Will you test this mobo?We will know surely conroe ready.
"We are competing, competing to win. And the main motivation is to compete for victory" - Ayrton Senna
OC?????
Alex
Dude, you MUST TEST CONROE w/9800 PRO/XT
Core i3-550 Clarkdale @ 4.2GHz, 1.36v (Corsair A50 HS/F) LinX Stable
MSI H55-GD65 Motherboard
G.Skill 4GBRL DDR3-1600 @ 1755, CL9, 1.55v
Sapphire Radeon 5750 1GB
Samsung F4 320GB - WD Green 1TB
Xigmatek Utgard Case - Corsair VX550
conroe + Ti4200 would be fun.
revive a real classic.
that card had a good 2 year run, even after it was discontinued.
"The command and conquer model," said the EA CEO, "doesn't work. If you think you're going to buy a developer and put your name on the label... you're making a profound mistake."
i got my whole computer except my gpu.. set it up and hadda use my old fx5200 and well... 3dmark 06 i scored ~100 and i couldnt get over 50fps in css even with everything low...
gigabyte 965p-s3
intel c2d e6300 @ 3.255 24/7 (stock hs/f)
corsair xms2 (twin2x1024a-6400c4) ddr2 800 @ 930 5-5-5-15
xfx 7600gt @ 650/841 [560/725 stock] (stock hs/f)
samsung spinpoint-p 160gb
antec sonata2 w/ 450w trupower2.0 psu
i love my budget gaming rig <3
highest OC so far.
Screwwwww Ti4200, 9800 > all
Core i3-550 Clarkdale @ 4.2GHz, 1.36v (Corsair A50 HS/F) LinX Stable
MSI H55-GD65 Motherboard
G.Skill 4GBRL DDR3-1600 @ 1755, CL9, 1.55v
Sapphire Radeon 5750 1GB
Samsung F4 320GB - WD Green 1TB
Xigmatek Utgard Case - Corsair VX550
Conroe on 3-phase power??? I have a lot of doubt about Conroe on this board. And, of course, the box does not mention Conroe. Best of luck but you should consider a backup CPU when Conroe will not boot.
when the mb supports prescotts and pentium D then a conroe will be a piece of cakeConroe on 3-phase power??? I have a lot of doubt about Conroe on this board. And, of course, the box does not mention Conroe. Best of luck but you should consider a backup CPU when Conroe will not boot.
and yea, box doesn't mention but asus site does.
look here: http://www.asus.com/news_show.aspx?id=3801
btw, it's very possible that this mobo doesn't support OC at all.
no voltage options (or very narrow, like vddr to 2.6v and no vcore chg)..
most asus matx boards don't allow to change even fsb from bios :f
Last edited by caater; 08-11-2006 at 04:06 PM.
I didn't say it would not support Conroe, I said I had my doubts. Big difference. Having another Core 2 Duo workhorse in the stable will be a benefit, for sure. Please let us know how it works out. OK?when the mb supports prescotts and pentium D then a conroe will be a piece of cake
and yea, box doesn't mention but asus site does.
look here: http://www.asus.com/news_show.aspx?id=3801
the GA-965P-S3 also is only 3-phase... the foxconn P9657AA-8EKRS2H has also 3 phase and can hit about 413 MHz FSB.Conroe on 3-phase power??? I have a lot of doubt about Conroe on this board. And, of course, the box does not mention Conroe. Best of luck but you should consider a backup CPU when Conroe will not boot.
WHY?!?!?!?!?!Conroe on 3-phase power??? I have a lot of doubt about Conroe on this board. And, of course, the box does not mention Conroe. Best of luck but you should consider a backup CPU when Conroe will not boot.
DS3 in the first two benching links in my sig is a 3-phase power mobo and kicked arse no problems at all
too bad.
put on x6800 no boot
change 631 no boot,e6700 either
i don't know what happen?
Last edited by hicookie; 08-12-2006 at 10:06 AM.
too , bad , checked , i bought a dead mobo
bad news, sorry
"We are competing, competing to win. And the main motivation is to compete for victory" - Ayrton Senna
That blows. Are you gettting another one....?
Alex
not yet , maybe tomorrow
asus is being brave. 266fsb "stock" support on an i865 chipset
i5 3570K@ 4.8GHz 1.32v, 32GB Gskill 1866, Gigabyte g1 sniper m3
HD7970@1125/1575 stock voltage
1TB F1+2*128GB Crucial M4
Silverstone 450w, no case
2560*1440@120Hz overclocked catleap
Steelseries G6v2+5600dpi modded logitech trackball
Hmmm i download manual of this mobo, and in bios is only option for timing's. No FSB/vcore/vdimm setting's
Life sometimes gets in the way of what we want to do.
Certainly brave, but may not be that impossible. As the P4P800's /SEs have scaled 290MHz with stock, or little voltage bump
Waiting for Crysis
P4P800-SE did "stock" ~300FSB (at least mine)... P4C800 also managed 280+ without problems...
ontopic - this is the kind of mobo that's made for mods
a E4400 with BSEL mod and a clean vmod and a little Clockgen should easily make a nice cheap C2D 3GHz team
Very nice, i865 still has juice
very tiny size, red line is standar atx
Posting Permissions
Reply With Quote
Bookmarks