Bios 1101 Asus P5W DH Deluxe Released!!!

**Pandamonia** · 08-10-2006, 04:22 AM

why would doing all that to the cmos have any affect on the settings in the bios?

if you flash a new bios using the windows program surely it will have the same affect than flashing from the dos one?

**Mr.X** · 08-10-2006, 04:42 AM

Originally Posted by Pandamonia

why would doing all that to the cmos have any affect on the settings in the bios?

if you flash a new bios using the windows program surely it will have the same affect than flashing from the dos one?

I was wondering that as well. I flashed 0701 in windows and it seems to work fine.

**don_vercetti** · 08-10-2006, 07:14 AM

Originally Posted by arrakys

i did, vmch is still at 1.65v max

And could you clock your FSB any higher?

**arrakys** · 08-10-2006, 07:23 AM

Originally Posted by don_vercetti

And could you clock your FSB any higher?

just a few.
btw, cpu is working at same o/c with less voltage (dropped from 1.4 -> 1.375)

**Brahmzy** · 08-10-2006, 07:28 AM

Is this a BETA BIOS? Is it up on ASUS site yet?

**DjLeco** · 08-10-2006, 08:11 AM

That bios, even the one that is modded(0801), have the same voltages(maximum) 1,65-1,50-1,20-1,70 Volts, last is Vcore.
Mine Mb boot at fsb 420 with 1,60 Vcore,but no more than 433,7 Mhz Fsb...
I tried all bioses greater than 0602 an still the same...
Even if I low down the multiplier at 8X or 7X...
Has anyone succed to use that modded bios for more than 1,65 MCH voltage?

**Big_Sam** · 08-10-2006, 09:00 AM

http://p5wdh.de/downloads/asus/bios/p5wdh1101.zip

Has somebody checked up it already?

**BulldogPO** · 08-10-2006, 09:19 AM

Instaled 1101 just, and much faster post.

**lawrywild** · 08-10-2006, 09:23 AM

Originally Posted by Pandamonia

why would doing all that to the cmos have any affect on the settings in the bios?

if you flash a new bios using the windows program surely it will have the same affect than flashing from the dos one?

BECAUSE it does and this is how I got vcore options on my p5wdh, and you should reflash the bootblock. You should ALWAYS clear cmos after flashing a new bios. I know that often you don't have to but you SHOULD always clear it.

**Mr.X** · 08-10-2006, 09:45 AM

Originally Posted by lawrywild

BECAUSE it does and this is how I got vcore options on my p5wdh, and you should reflash the bootblock. You should ALWAYS clear cmos after flashing a new bios. I know that often you don't have to but you SHOULD always clear it.

What's the bootblock?

**DEVIL_DK** · 08-10-2006, 10:03 AM

this bios does noting new on my rig
still slooooooooooooow boot and
it still say oc fail blabla and reset pÃ¥ 2400 mhz

**lawrywild** · 08-10-2006, 10:14 AM

Originally Posted by Mr.X

What's the bootblock?

"The BootBlock is a portion of the BIOS which will sometimes boot when the BIOS itself has been corrupted to enable you to boot to a floppy and reflash. Sometimes it works, sometimes it doesn't."

**Brahmzy** · 08-10-2006, 10:24 AM

Originally Posted by DEVIL_DK

this bios does noting new on my rig
still slooooooooooooow boot and
it still say oc fail blabla and reset pÃ¥ 2400 mhz

Does the P5W DH boot slow in general? I just ordered one of these for my E6600. I thought my DS3 booted slowly, I hope this thing doesn't boot slow!

**AndrewZorn** · 08-10-2006, 10:30 AM

youre honestly basing your board decision on the couple of seconds extra it might take when you boot it?

**Ldawg** · 08-10-2006, 10:37 AM

board boots pretty fast in my opinion...

**Brahmzy** · 08-10-2006, 10:37 AM

Originally Posted by AndrewZorn

youre honestly basing your board decision on the couple of seconds extra it might take when you boot it?

Hey - everybody's telling me I've should have gotten this board to begin with if I'm using an E6600. I would prefer it not to boot slowly as I've dropped thousadns into this rig. Why have 2 RAID0 Raptors if the mobo prevents things from booting decenty quick. That said, I already ordered the board, so if it does, I'm screwed anyway.

**Pandamonia** · 08-10-2006, 11:07 AM

seems my overclock will now run at a lower voltage.... im priming at 1.46 rather than 1.5v

Also mhc at 1.5v rather than 1.6v

**Brahmzy** · 08-10-2006, 11:21 AM

Originally Posted by Pandamonia

seems my overclock will now run at a lower voltage.... im priming at 1.46 rather than 1.5v

Also mhc at 1.5v rather than 1.6v

That's great news!

**fornowagain** · 08-10-2006, 11:22 AM

Does it have the profiles?

**don_vercetti** · 08-10-2006, 11:39 AM

Originally Posted by Pandamonia

seems my overclock will now run at a lower voltage.... im priming at 1.46 rather than 1.5v

Also mhc at 1.5v rather than 1.6v

Promising...so what can you achieve with 1.6v mch now? And 1.5v CPU i guess.

**Mykou** · 08-10-2006, 11:48 AM

Does anyone with ES tested it and boot correctly ?

**Pandamonia** · 08-10-2006, 12:16 PM

i think im limited to about 3.5ghz on my cpu aty 1.5v so i duno but i can do this with 1.5v mch now.

Also im in windows kinda stable on 4:5 divider playing Fear for half hour then reset... not sure if that was ram or not tho. i need a windows bases memtest.

im gona try the other divider

**Igor01** · 08-10-2006, 12:38 PM

Originally Posted by Mykou

Does anyone with ES tested it and boot correctly ?

Works fine with a 6700ES.

**Mykou** · 08-10-2006, 12:49 PM

Originally Posted by Igor01

Works fine with a 6700ES.

thanks , I'll then give a try

**Kriller** · 08-10-2006, 01:14 PM

Does this work with ES-cpus?

Edit: Didn't update the thread tab for a couple of hours

Thread: Bios 1101 Asus P5W DH Deluxe Released!!!

Thread Tools

Search Thread

Rate This Thread

Display

That

New BIOS - 1101 for P5W DH

Bookmarks

Bookmarks

Posting Permissions