Post your E6700 OC results

[Eastcoasthandle]

I wanted to create a thread where folk can post their 24/7 stable E6700 OC results. It would be helpful to know what MB you are using. Also post your configuration such as vcore, FSB, MCH, ram, etc

Thanks.
CPU: Retail or ES?
MB:
Vcore:
MCH
Memory Voltage:
Ratio: 1:1, 4:5, etc

Also note if you are simply using:
AI Overclock: Auto, AI Nos, etc instead of manual OC.

[theteamaqua]

i think peopel will be disappointed at least before good boards

[bobov]

Manaul OC in BIOS, 360 x 10 = 3.6Ghz superpi 32M stable.

CPU: E6700 Retail Boxed
MB: Asus P5W DH
Vcore: 1.50v in bios, 1.47-1.48v in asus pcprobe2
MCH: Auto in bios, 1.50v I guess
Memory Voltage: 1.90v 1:1

[Vassili]

It's better if you post them here:
http://xtremesystems.org/forums/showthread.php?t=106321

Then it's all in 1 thread.

[Mykou]

E6700@3.43 ghz ( manual o/c )
ratio 4:5 with DDR 400@429 mhz
air cooling


CPU:E6700 ES stepping 6 B2
MB:Asus P5WDH bios 701
Vcore:1.4375v ( bios)
MCH:1.55v
Vfsb:1.40v
Memory Voltage:2.2v

edit; also boots at 3.6 ghz but not stable under prime and chip too hot, have to cool it better

[Eastcoasthandle]

Bobov settings...thanks for the heads up

My E6700 retail @3.6GHz in P5W DH settings, maybe helps to you:

PCI Express freq = Auto
PCI = Auto
Performance = Auto
FSB = 360
RAM = 720Mhz @12-4-4-4
Vcore = 1.50V
Vmch = Auto
Vdimm = 1.9V
Vfsb = AutoHyperpath 3 = disabled
RAM Throttlig = Auto
EIST = disabled
Virtualisation = Enabled

Edit to reflect the correct person who posted this setup

[bobov]

My super stable E6600 settings, maybe helps to you:

PCI Express freq = 101
PCI = 33.33
Performance = Turbo
FSB = 400
RAM = 800Mhz @8-3-3-3
Vcore = 1.525V
Vmch = 1.65V
Vdimm = 2.3V
Vfsb = 1.4V
Hyperpath 3 = disabled
RAM Throttlig = disabled
EIST = complete disabled
Virtualisation = disabled

I believe this was by ORB, if not please ID yourself

No, that's my settings.

[Eastcoasthandle]

Can anyone verify the hights FSB without touching the Vcore?

Side note for P5W DH Deluxe users:
I am now able to turn my computer on/off with the remote now. Although turning it off instead of powering it off is not a good idea. Turning it on via remote is no problem now. I haven't installed any software to date. I don't recall what I did in the bios but that USB port must be active while the computer is off or it won't work. I am using a Antec, usb 7 color strobe in same usb port and the power light stays on now even when the computer is off. It freaked me out at first but now I know why it has power...it allows you to power on the computer via remote. I have a funky multi color mouse pad that now lights up when I turn the PSU switch from off to on. This indicates to me that all the USB ports are active. Personally I'd be very careful not to plug or unplug anything unless the psu switch is off to avoid shock. In all I might turn this feature completely off as you have no PSU protection until you turn it on. Just my 2 coppers worth.

[mike]

CPU: E6700 Retail @ 4.43 GHZ boot into Windows ( more might be in it..)
MB: Intel BadAxe
Vcore: 1.58V
MCH: 1.72V
Memory Voltage: 2.2

Cooling: Single Stage

[orion23]

CPU: E6700 Retail @ 4.43 GHZ boot into Windows ( more might be in it..)
MB: Intel BadAxe
Vcore: 1.58V
MCH: 1.72V
Memory Voltage: 2.2

Cooling: Single Stage

How did you get past the 360 wall (DQ6 and P5WDH users have reported this)

What settings are you using?
RAM?

[theteamaqua]

How did you get past the 360 wall (DQ6 and P5WDH users have reported this)

What settings are you using?
RAM?

single stage cooling = -50c at least, -100c at most... thats why i think


also hes on 975xbx, with mod that board is the best

[Eastcoasthandle]

CPU: E6700 Retail @ 4.43 GHZ boot into Windows ( more might be in it..)
MB: Intel BadAxe
Vcore: 1.58V
MCH: 1.72V
Memory Voltage: 2.2

Cooling: Single Stage

Are you using 1:1 timing?

[rallyho]

CPU: e6700 b1(es) @3.66G, dual prime stable
MB: p5wdh
Vcore: 1.5v(bios)
MCH: 1.55v
fsb: 1.3v
Memory Voltage: 2.2v 915mhz@4-4-4-12

[Mako88]

CPU: E6700 oem B2 @ 3733MHz, dual prime stable
MB: Bad Axe 304
Vcore: 1.6v
MCH: Stock
Memory Voltage: Stock
Cooling: Ninja

[Tallman]

manual oc
e6700 retail box@3754
00903 bios

vmch= auto
vdimm= 2.25
vcore 1.6 in bios




EDIT: I think it would be nice if we all posted if it is retail or es

[Eastcoasthandle]

Anyone else out there care to share?

[Jabba]

Anyone else out there care to share?

Here are my results so far, go easy on me though as I am still on a steep learning curve at the moment.

Mobo : Asus P5WDH (un-modified except for a 120mm blowing over her)
Cpu: OEM (from Scan UK) Conroe E6700 @ 4.0GHZ 1.6v
PSU : Temporary :Ulta 520W (need single rail for vapo) Usual :OCZ 520W Powerstram currently on a RMA
Cooling : Vapo XE (with some better insulation, and a few tweeks) -26c idle -22.5c full load
vcard : 2 x ati x1600 (crossfire enabled) I am not a gamer but I need quad outputs, stock, as I know nothing about graphics but would be willing to learn, 36K on 3dmark 01.
Ram : GSkill Dual Channel HZ PC2-6400 2GB 400mhz 4-3-3-4 2.2v
Monitors : 4 x 21.1 Samsung TFT
Headache Medication : 4 x Anadin Extras
Dog : A gold one like the master of the conroe OC.
Website : www.jabbasworld.net

[zicl]

E6700 OEM dual prime stable at 3.3ghz on p5w-dh with g skill 6400hz BIOS 903

Vcore = 1.4125
Vmch = 1.6
Mem volts = Auto
ICH = Auto
PCI-E = 105
Performance = turbo

Mamory at 1:1 330x10 and at 4-4-4-12 Air cooled with Ninja.

to be honest i havent had a great amount of time to play as i blew my tagan 900w psu up the other day.

Also i can PI at 3.6ghz all i like but it just isnt stable for dual prime. PI 1M calculation came in at 14.437 which aint too shabby

[Icer]

E6700 OEM @ 3.68GHz ~40C Idle

I've ran everything on my computer (including games) for a few days at these settings... never checked if it's dual prime stable though. I can boot as high as 380 FSB 3.8Ghz 1:1 ram but can't get into windows. I maybe could if I upped the Vcore but since I'm not sure what the highest Vcore is safe, I didn't try higher than 1.55.

See PC spec's in sig.

PCI Express freq = Auto
PCI = Auto
Performance = Auto
FSB = 368
RAM = 4:5 920Mhz 4-4-3-10
Vcore = 1.55
Vmch = Auto
Vdimm = 2.0V
Vfsb = Auto
Hyperpath 3 = disabled
RAM Throttlig = Auto
SpeedStep = disabled
Virtualisation = Enabled

[Eastcoasthandle]

anyone else?

[Dynasty]

How did you get past the 360 wall (DQ6 and P5WDH users have reported this)

What settings are you using?
RAM?

360 wall on P5WDH-Del. ? where ...no vmods done either, also
with & without Hyper Path 3 can do 430 Fsb.

[Icer]

I'm thinking the wall is that you can only get around ~3.4GHz to ~3.7GHz depending on the Vcore setting you can use and still keep it cool. The correct bios settings seem to help but It also seems some can get a higher FSB (using a lower multiplier) than others but most are still at the ~3.4GHz to ~3.7GHZ range....time will tell.

[Yoxxy]

Proc: E6700
Mobo: P5W DH
Ram: OCZ PC8000 VX2 (4-4-4-12)
Water: 30 idle, 41-43 load.

350 FSB
vCore: 1.45
VDimm: 2.4
2:3 Divider (352 it craps out for divider and I need to use 1:1)
MCH: 1.6
FSB Term: 1.3
DDR2-1050.
Dual Prime Stable and everything else. I can get up to 3.75 ghz but I need 1.6 vCore and then have to use 1:1 ratio. For 24/7 stable I am more then happy with 3.5 ghz and 1050 ddr2. Maybe others will want more.

[thorgal]

Results so far (gradually tuning it up) :

Proc: E6700ES - step 5, B1
Mobo: Intel Bad Axe 302 modded
Ram: OCZ PC6400 EB (Fat bodies) : 4-3-2-1
Watercooled by Alphacool NexXxos Xp, temps about 40° stressed atm.

360 FSB
vCore: 1.45
VDimm: 2.2, hence the "higher" cas
1066 strap
1:1 Divider (533mhz mem speed)
MCH: 1.725
FSB Term: 1.33
Enhanced slope : disabled
PCI@default, PCIe@105Mhz

Fully dual f@h stable for 24h

[Tallman]

Improving!<a href="http://img85.imageshack.us/my.php?image=jpg1gg3.gif" target="_blank"><img src="http://img85.imageshack.us/img85/2085/jpg1gg3.gif" border="0" alt="Free Image Hosting at ImageShack.us"/></a>



Well, Image doesn't want to show even though I tried to upload to this site and tried imageshack. But, I am booted into windows and have a shot of AiBooster and cpu-z @380 fsb 1.6 vcore