The Official X2 Overclocking Thread (Please Post Your OC's)

[inzer890]

Guys, what's about Toledos of 0601 (4400+). Won't it be a mistake for me to take one? As far as I understand, those few weeks (before NewYear and after) were devoted to the selection of best chips for FX-60? Am I right? The cause of my disturbance is that I won't have the possibility to exchange the sample. While I hope to get 2.8GHz on my LanParty NF4 SLI-DR

[blind_ripper]

update on my X2 3800+ LDBFE 0614WPMW
http://i3.photobucket.com/albums/y90...rime3800x2.jpg
wr prime it is sure hot this time off year
http://i3.photobucket.com/albums/y90...r/DSC08044.jpg
setup like it looks now
http://i3.photobucket.com/albums/y90..._ripper/26.jpg
little pi run under mach2
http://service.futuremark.com/compare?3dm05=2099823
3.3ghz @ 1.71vcore
thats for now

[skycrane]

just got a new x2 3800 LDBFE 0608 RPBW, hope this one is a goodie.....hopefuly ill have it up and running by the weekend, just waiting on the egg and atacom to ship my new hardware

[Shakermaker]

I just got a new 4400.
These are the specs:

CCBWE 0609 DPMW
Batch C 60341

Do you have some informations about the stepping ?

[Serge84]

http://valid.x86-secret.com/show_oc?id=108682
http://www.xtremesystems.org/forums/...16#post1615316

Max so far was 2850mhz benches shown in link. Will try to get a validation of the suiside 3ghz shot again. Stupid Cpuz cus it was out of date the 1st time.

[vcas5]

well i picked up a cheap 4800

http://valid.x86-secret.com/show_oc.php?id=108860

ccbwe 0602 bpmw

stable at 2.92 gig @1.6v ihs removed under water so far 4 hours.
i needed 1.64v for a 3g ss,i cant get it stable at all.

[h@RRy]

I just got a new 4400.
These are the specs:

CCBWE 0609 DPMW
Batch C 60341

Do you have some informations about the stepping ?

I have the same stepping and I'm curious as well, although after a systool find max FSB run it seems to top out at 2500 even with LDT = 3, VCORE 1.45, and 1/2 divider...strange thing is SYSTOOL also crapped out at 2500 with stock VCORE, LDT = 5(?), and a 1:1 divider
I'll be back later, I only spent about 1.5 - 2hrs poking around.

[lucas81]

I have the same stepping and I'm curious as well, although after a systool find max FSB run it seems to top out at 2500 even with LDT = 3, VCORE 1.45, and 1/2 divider...strange thing is SYSTOOL also crapped out at 2500 with stock VCORE, LDT = 5(?), and a 1:1 divider
I'll be back later, I only spent about 1.5 - 2hrs poking around.

I have the same stepping...and mines crapped out at 2475....i think i can do 2500 but the temps got really high.. 52 or so...what are your temps?

[davidian]

X2 3800 Toledo:

ADA3800DAA5CD
LCBIE 0618EPMW

Vcore: Auto (BIOS)

[Tictac2]

X2 3800 Toledo:

ADA3800DAA5CD
LCBIE 0618EPMW

Vcore: Auto (BIOS)

2.8ghz at stock volts 1.35v?? Is that the real voltage?

[[XC] 4X4N]

Picked up X2 4200 for $185. LDBFE 0619WPMW Seems about average. 2.7ghz @ 1.485v Runs hot though, I might have to take off the ihs. With a big typhoon, I'm getting temps in the mid 50's. Probably could get 2.8 with more volts. Still, I'm happy with this, been running rosetta for about 10 hours now.

[davidian]

2.8ghz at stock volts 1.35v?? Is that the real voltage?

Yeah, it's real voltage. We have three CPU's from LBCIE 0618EPMW series (forum.purepc.pl), and each do 2800Mhz @ ~stock voltage.

[MrRevhead]

Yeah, BI mem controlled x2's are good to date 0621/0625 VPMW & WPMW's are also pulling the same results.

Got a LCB1E 0619 RPMW @ 2.75Ghz stock voltage for now.

Heres the beginning of the initial 2.7Ghz run, 10 mins after it was installed


Will update you guys with the max I achieve once new PSU etc arrive.

BTW, I would be interested to know the TCaseMax for the cpu's you BI guys have

[davidian]

2.9Ghz @ 1,36v

[Tictac2]

Yeah, it's real voltage. We have three CPU's from LBCIE 0618EPMW series (forum.purepc.pl), and each do 2800Mhz @ ~stock voltage.

Sorry for my noobiness but will a LCBIE 0618RPMW be the same?

[MrRevhead]

Sorry for my noobiness but will a LCBIE 0618RPMW be the same?

Pretty close.

Counter CD has one, pulling fairly similar results. He got up to 3.1Ghz. (Link)

[freakBYnature]

I have mine all up to 2.9, but for an everyday overclock i settled for 2.7, even though i can have it at 2.8, but i do believe it will only last 50% of the time if i stick it on full throttle 24/7

[freakBYnature]

I have mine all up to 2.9, but for an everyday overclock i settled for 2.7, even though i can have it at 2.8, but i do believe it will only last 50% of the time if i stick it on full throttle 24/7

[hawkeyefan]

X2 3800 Toledo:

ADA3800DAA5CD
LCBIE 0618EPMW

Vcore: Auto (BIOS)

I got one yesterday from MicroCenter

LBCIE 0618EPMW
batch 0686

2800mhz@stock volts 3hrs+ dual prime so far

1.575@ 3000mhz core1 craps out ~40 minutes dual prime, Core0 still going strong there

[Tictac2]

Just got a LCBIE 0618RPMW x2 3800+ from eBay (for less than what i would buy for it from a shop ) so am hoping for great things. ..

These steppings seem to go incredibly far on stock volts, but then not as further as one would think on more volts. . ?

I'm thinking that it should work well with RMClock. . .becuase of the low volts.

(It works well with my 3500+ Venice - 230mhz fsb, x11 multiplier. Down at 1.4ghz when I'm not doing anything intensive and then it ramps up to the full 2.53ghz when I do. IMO, every overclock on stock volts should be teamed with RMClock, I can't see any disadvantage with it.)

I've just bought a Scythe Ninja Plus so I'm hoping that will work well with it.

[shoman24v]

Does this make the list? On air.

[hawkeyefan]

LBCIE 0618EPMW update

on air, TTBigTyphoon, ihs still intact:

SP32M@3000mhz

http://valid.x86-secret.com/show_oc?id=110261

SP1M@3100mhz

http://valid.x86-secret.com/show_oc?id=110263

[GenTarkin]

Well I am extremely dissapointed on my new purchase =(
I recently got a 3800X2 939 Manchester
0623 XPMW not sure of the first 5 letters but its the common ones on here...

Im pretty sure this chip sux and I really wanna exchange it grrr....
its not stable on anything above 2400mhz right now...it takes 1.47 to do that even stable. I tried 1.38v at that speed but BSOD with prime runnin both cores =(.
I verified it wasnt my HTT limit on board, cuz I lowered multi and ram and cranked the HTT to 280+ and I know it does 295mhz with my single core 3000+
I know the drivers are installed correctly I did it per recommendation of first post in this board. I also correctly switched HAL's to ACPI Multiprocessor in device manager. I know it aint that, thats causing the problem...that would be even if it werent oc'd.

My RAM I tried both auto settings and manual settings all below 200mhz...

It wont even do 2.55ghz @ 1.52v =(
My temps are 35C Idle @ 2.4ghz 1.47v load they approach 50C
My motherboard is Biostar Tforce6100-939

Im so pissed ... anyone have any ideas?

Thinkin about just putting my 0517 3000+ APAW back in here which can run 2.66ghz on this board just fine!
HELP!!!

[xforce]

AMD X2 3800 Manchester core
ADA3800DAA5BV
LDBFE 0609XPMW

Liquid cooled - 2800mhz (vcore:1.456v)



Work-in-progress

[TEDY]

AMD X2 3800 Manchester core
ADA3800DAA5BV
LDBFE 0626 EPMW

So far 250 default prime 1h.....