Some Cedarmill Action

[outcast623]

p5wd2-e
intel cedarmill 631
ocz game extreme 700w
gskill 2gb HZ
chilly-1 ss
vcore 1.6v
vmch 1.73v with dmm

http://valid.x86-secret.com/show_oc.php?id=109437

i cant seem to get past 5700mhz with these settings, can anyone give me some insight as to what i can do to get higher clocks?

more vcore?

p.s.
i have hyper path disabled, pci locked to 101, vfsb on auto.

here is my best 1M pi so far

[Unseen]

vdroop? It helps.

my 631
http://www.xtremesystems.org/forums/...0&postcount=33

[outcast623]

yep the board is fully modded vdroop, vcore, vddr2, vmch.

are those clocks you got truely on 1.7v? im usiing up to 1.6v and i cant get it stable enough for any pi at 5.7

i will take some pictures once i get my camara back!!

[ZX7891]

hes on a cascade youre on a single stage

[Gebba]

hehe nice klocks.
i waiting foyr my chlilly1 r402a modded mach2 now to get in action whit my celly 65nm.

have you tryed more vcore?
maby you need a better bios or cooler things on the chip

[outcast623]

i havent tried over 1.6 yet but i was thinking, if it takes 1.6 do get to just 5.8ghz what kind of voltage is it gonna take to get to around 6.7 if i wanted to use dry ice or something?

so i thought maybe something else is holding me back?

maybe the BIOS, ill check into trying some different ones.

[Unseen]

if u can find a mobo that can do over 450fsb...

[Gebba]

how cold are the evap temp on your ss?
if it pi stable it it most be a way to get it som higher.

[outcast623]

here is my new highest

http://valid.x86-secret.com/show_oc.php?id=109790

i managed this at 1.7v!! whats the deal? and its not even pi 1m stable.


is there some trick to this unseen? ive tried more voltage, ive tried changing memory from 1:1 to running memory faster, ive tried max voltage a vfsb.

could it just be a bad core? or the mobo? i mean ive got this thing fully modded so does it need more vmch? im running at 1.73 right now (measured with dmm)

i boot into windows at 5.5ghz and use clockgen to go higher. Is this my problem? becasue i cant seem to boot properly over 5.5ghz

evap temps are low -40c and dip down to -38c at 1.7v

[Gebba]

tryed to use another divider?
the memory controller can maby not work so good on every stage?

try just one memory stick and se if you get any higher.

you can possibly get some higher in fsb if you cool the north bridge som more to.

are your evap temps -38 in load?
i don´t think its a bad core but the mobo can be the botttle neck,but 5,8ghz isn´t bad att all!