Retail (Newegg) 6800 gets SMOKED (good way)

[Joe Camel]

title explained: i named the D-Ice tube
The Camel Pipe
*- Just SMOKE It! -*




Retail 6800 from Newegg:







#3 Pi 1M (mbot)











#2 Pi 32M (mbot)








6800EX
ASUS P5W-DH (un modded but improved cooling)
2x gig Corsair XMS 6400 CAS3
Zippy 700w PSU
D-Ice Cooling







i know: it reads low

.......







.

[AndrewZorn]

Can you do me a biiiiiig favor?

See how high you can get it using 9x (or if you can estimate that'd work too)? EDIT nevermind found out you were using Dice not Phase...
Well what do you THINK you could go for for 24/7 operation?

I'm just interested because I already have phase, but won't pay more than what an E6600 costs. I know the board's FSB is going to be a rough thing to get over... but a retail E6600 shouldn't WANT to go much higher than 4, 4.2 for 24/7 on phase, right?

[Joe Camel]

Chilly1 Single Stage
Evap read -42C in BIOS


down into the 4.3s just to make it through a 3D 05 run
couldn't tell ya where it's "truly" stable


mobo does 440 but NOT much more 8x 9x 10x dont matter the multi
(no mods... yet)

.

[Torphoto]

Damnnnn

[Mr. Popo]

Sweet

[hicookie]

amazing the overlcoking with the retail box

should we take the same batch, hehe

[dr_sharp]

Looking good. Put it under some water and tell us "blue-collars" what we can expect to see out of it

[Joe Camel]

Looking good. Put it under some water and tell us "blue-collars" what we can expect to see out of it

(this is NOT "Dual Prime 24/7" stable!!!!!!!! its just single 32m stable )




Storm G5 (silver), Laing D4 pump @ 14V, twin single pass "dual-heater cores" in series, 4x 130CFM fans
CPU cooling the same... Vid card NOT:

[Dumo]

Nice cpu there JC

B2 is a beast with the right cooling and a decent mobo

[Mr. Popo]

Damn, Joe you are one accessorized guy.

[Joe Camel]

Damn, Joe you are one accessorized guy.

im a collector of the exotic cooling equpment... have a G4 Storm from the VERY first batch (unstepped) had 2x.... o its pointless, if its the best , loudest, biggest , ive probably collected it (and payed through the NOSE most times )

[dr_sharp]

(this is NOT "Dual Prime 24/7" stable!!!!!!!! its just single 32m stable )

Storm G5 (silver), Laing D4 pump @ 14V, twin single pass "dual-heater cores" in series, 4x 130CFM fans
CPU cooling the same... Vid card NOT:

word.

make that #1 32M

[Joe Camel]

i get the feeling there's more in there...needs a V-Core mod ... but running 1.7v+ through a 65nm Core scares me

[Joe Camel]

make that #1 32M

[metro.cl]

you need to cool the chipset (put dry ice on it and you'll get almost unlimited fsb) to go for higher fsb that is the big secret of conroe.

[AndrewZorn]

you need to cool the chipset (put dry ice on it and you'll get almost unlimited fsb) to go for higher fsb that is the big secret of conroe.

it might sound like a stupid idea, but...

what if i put my phase on the P5W CHIPSET, and used high end air for the CPU? do you think itd get the same/better than phase on CPU and stock chipset solution?

[metro.cl]

it might sound like a stupid idea, but...

what if i put my phase on the P5W CHIPSET, and used high end air for the CPU? do you think itd get the same/better than phase on CPU and stock chipset solution?

not sure, but you could try that if you are fsb limited it could help

[Iconyu]

it might sound like a stupid idea, but...

what if i put my phase on the P5W CHIPSET, and used high end air for the CPU? do you think itd get the same/better than phase on CPU and stock chipset solution?

I don't think you'd be able to clamp it down well. But I've not even seen the board.

[Mr. Popo]

it might sound like a stupid idea, but...

what if i put my phase on the P5W CHIPSET, and used high end air for the CPU? do you think itd get the same/better than phase on CPU and stock chipset solution?

Now that's just stupid, use some quality W/C for chipset and the SS on CPU.
The northbridge can get pretty hot but not like the CPU.

[K.I.T.T.]

Now that's just stupid, use some quality W/C for chipset and the SS on CPU.
The northbridge can get pretty hot but not like the CPU.

NB can get VERY hot indeed. and water doesn't have any effect on improving yields on NB. Only sub zero does to some extent.

[Zardokk]

NB can get VERY hot indeed. and water doesn't have any effect on improving yields on NB. Only sub zero does to some extent.

There is a solution to that. Not too long ago, I saw a phase cooler with 3 seperate heads. One fore CPU, one for chipset, one for GPU. Now granted, it probably got maybe -15 to -20C temps at best, it's still subzero and it would still yield very good results.

[ScottFern]

you need to cool the chipset (put dry ice on it and you'll get almost unlimited fsb) to go for higher fsb that is the big secret of conroe.

This man speaks the truth. I upgraded my NB cooling and now I can hit 400+ FSB easily now.

[AndrewZorn]

heh, well, first time using phase... thats why i want to get a second opinion before i proceed to ruin my board (especially in vain) with improper mounting/insulation

[DesertShooter]

Step 6

[Gun_Strife]

thats some nasty good stuff
gotta love the unlocked multi