Quote Originally Posted by Clint
I did gave you a full description in my earlier post, did you ever try it?
Yes, these are the default timings : ) ...only 3-4-3-8 is set
manually (if on auto it's 2.5-4-4-8 and no boot); all other
timings are on auto...but this is 250Mhz on a 166 divider
(cpu@2750MHz; (250MHz on 1:1 gives cpu speed at only
2250).

But so far I have not entered these timings manually in
bios...first I wanted to see if it will be Prime stable this
way...but I also raised vcore...so maybe this is the
solution...that memory controller needs more volts for
memory to be stable (with 2x512MB TCCD cpu@2800
needed only 1.4125v to be stable, now the vcore is set
to 1.45v ...ignore cpu-z voltage reading ...it is off).