600MHz CAS3 done with 6400C3s 2*1GB : WR !

[bachus_anonym]

Cpu-z and clockgen with combination with the deviders and the mobo, show WRONG numbers as for the Ram frequency as for the Bad Axe.....1333 and 25% and the rams at 667MHz, the frequency of the rams are 1:1....and NOT 520MHz(1044MHz DDR) as it is shown as 4:5......People have posted a LOT of resaults lately with D9 Faties @ 530MHz+ with Cas 3-2-2-1.....NO WAY....check it out you guys....

EDIT: If with the above combination we chose the 533 Ram config, the system works the Rams at LOWER frequency than the fsb....almost 5:4 (CPU:Ram).......

Thanks George! I'm 100% sure it's the case as well in ALL of those below:

DDR2-1120 8-3-3-3.0, DDR2-1100 8-2-2-3.0, DDR2-1150 1-3-3-3.0, DDR2-1066 5-3-3-3.0

All on 975X BadAxe, Conroe and at which appears to be 1333 strap with 4:5 ratio...

Give us more explicite examples.

I'm 100% agree with you by saying that more than 550MHz cas3 won't be easy to reach.

Well, I think that even DDR2-1000 8-3-3-3.0 is quite a lot to ask at 2.5-2.7v Those new Microns D9XXX are great, but that THAT great yet

EDIT: By posting this, I do not intend to rain on none of the above guys' parades... I would just advise to double-check (triple-check If neccesary) to make sure that results are credible and more importantly, possible. Run few extra benches at and compare results before getting super-excited. Those results at CAS3 are way beyond anything else we've seen so far from new D9xxx and should sound an "alarm" already Just a thought...