ASUS P5W DH mods & E6700@4G by water-cooling

[kyosen]

FischOderAal> but you increased the Chipset Voltage for 450mhz FSB now, didn't you?
--
Yeah, Vmch=1.905V

FischOderAal> would be insane if not 450mhz FSB without Mods or rising voltages
-
SturmoV> I, too, would like to know this. Are those mods really necessary to push Conroe to
SturmoV> 4Ghz on water with this board?
--
I don't know P5W-DH behaviour without mods,
because I've modified all before first power-on
Mod itself is an object for me...<b>No Mods, No Life</b>

thunderstruck!> Did you run 3D01? Can you show us pleeeease?
--
I failed to running 3D01 by LN2-cooling, but water-cooling is enough for 70k+
<img src="http://222.151.145.37/c-board/file/3DM01_70556_E6700_3904.png">

quent> Do you think so this will be safe ?
--
Yes, parallel connecting should be also working fine.
I just avoid non-linear change of resistance value.
BTW, Vdroop mod may not be necessary, I feel
Vcore drop is very little(~0.003V) under load, in my case.

vanovich> heres a link to the clameshell
--
OK, I understand...
The space arround CPU socket of P5W-DH is tight...occupied by capacitors.
but I don't have the clamshell, so I can't judge whether it's available or not, sorry.

crotale> can you change the vcore in that BIOS?
--
I couldn't...I used Ai Booster, though its behaviour was strange.
I set 1.3125V in Ai Booster, and adjust with VR.
QuadDamage said existence of BIOS 0065,
and FischOderAal introduced the link to the BIOS in another thread:
http://members.inode.at/p.damjanovic/0065.rar
I'll try it later.
BTW, congratulations for your 3D work