The Official Opteron 939 Overclocking Thread

**gsan** · 05-27-2006, 04:44 PM

update:

Opty 146 CACJE 0607 APBW @ 2900, 1.54v

**daysleeper** · 05-29-2006, 03:32 AM

Originally Posted by daysleeper

Miine is just that and now its 2700Mhz 1,55V im pretty disappointed because everyone else hits 3Ghz...

...but more testing.... http://murobbs.muropaketti.com/threa...310&msRange=70 some finnish testing...

Ok some primetesting and this is the result...2900 crashed after 53 mins... 2850
ok result, not amazing but its fine i think...

**before** · 06-02-2006, 01:41 PM

OPTERON 144 CACJE 0604BPAW 320HTT*9@1.39V under watercooling

**Killer89** · 06-02-2006, 11:49 PM

Opteron 144 CAB1E 0614EPCW 3100Mhz@1.425V under aircooling

**celemine1Gig** · 06-03-2006, 02:00 AM

Originally Posted by Killer89

Opteron 144 CAB1E 0614EPCW 3100Mhz@1.425V under aircooling

Pics to prove that?

**Killer89** · 06-03-2006, 10:00 AM

Originally Posted by celemine1Gig

Pics to prove that?

Here is pic at 3200mhz with 1.55V

Temperature was so low because my room window was opened

Cooling is Freexer 64

**coop** · 06-03-2006, 06:13 PM

That's a pretty nice chip Killer. I got a 148 a couple days ago. Trying it out last night, 32m Pi @ 3300mhz and a 1m @ 3496. 1.63v. Will do more tonight.
http://img.photobucket.com/albums/v1...2532m33301.jpg

http://img.photobucket.com/albums/v1...25/5251m23.jpg

**dinos22** · 06-03-2006, 06:19 PM

Originally Posted by coop

That's a pretty nice chip Killer. I got a 148 a couple days ago. Trying it out last night, 32m Pi @ 3300mhz and a 1m @ 3496. 1.63v. Will do more tonight.
http://img.photobucket.com/albums/v1...2532m33301.jpg

http://img.photobucket.com/albums/v1...25/5251m23.jpg

looks similar to mine that one

you should be able to do 32M in mid to high 34xxMHz

**sofarfrome** · 06-04-2006, 02:56 AM

Those CAB1Es are fine. Mine will run 3.1GHz on stock voltage and TCCD ram. However I am currently using BH5 and I have bumped the Vcore a little to address the memory controller issue and have gotten to 3.2GHz. I would like to go higher but I would hate to fry this proc.

**DXL** · 06-04-2006, 06:58 AM

Opteron 165 CCBBE 0610DPMW, 3.0GHz on air. Bootable en stable in windows. Not 100% Prime stable (just few hours), need more vcore for that and therefore water.

**Dani** · 06-04-2006, 07:12 AM

My Opt 144 CAB1E 0604CPMW is runing SP2004 v24.14 now @ 3006MHz 1.37V AIR cooled

...waiting for Conroe

**starostise** · 06-04-2006, 12:42 PM

Originally Posted by Killer89

Here is pic at 3200mhz with 1.55V

Temperature was so low because my room window was opened

Cooling is Freexer 64

your blend test is not valid. only 1 test passed in 20minutes
you must use less ram because prime used your swap. that's the reason you have only 37Â° "load" with your freezer 64 pro

whatever, week 0614 is the best week i've ever seen for opties

i'll receive Ã:banana: CAB1E 0614 DPCW soon and it"ll do 3GHz on stock volts aircooled

**coop** · 06-04-2006, 05:19 PM

I've done four 32m pi's with this chip. The one above, a 20.37..a 20.36.. and this one, a 20m35s :[IMG]

[/IMG] .
Also did a validate for the heck of it..3663. http://valid.x86-secret.com/show_oc.php?id=98026
May try more tonight as I believe it can. So far it has done everything all the way through. The validate could also go higher I think as I did not really want it to blink out. It is a 0543FPMW. I have to run with SysTool on to monitor temps.

**Repoman** · 06-04-2006, 05:44 PM

Yep, B1 chips are just as impressive in single core as they are in dual core chips

Where did you guys get your 0614s? I have a CAB2E 0602 coming, should be nice

**coop** · 06-04-2006, 10:41 PM

cpuz validater...3.7Ghz http://valid.x86-secret.com/show_oc.php?id=98257
And a PB 32m SuperPi for me..20m32sec

**Dani** · 06-05-2006, 12:16 AM

3006MHz @ 1.37V SP2004 v24.14 stable for +16h
Opt 144 CAB1E 0604CPMW and TT BigTyphoon

**Emperor** · 06-05-2006, 01:12 AM

any idea what can i tweak in my bios to stabilise my 305x10 overclocks ?

other than vcore that is.

and also whats the max vcore i can go while not killing the chip?

**Kain XS** · 06-05-2006, 05:18 PM

Opteron 146 CABYE 0540FPAW @ 3.00ghz Swiftech Apex Ultra Cooled 1.58v

**BlueAqua** · 06-06-2006, 02:44 PM

I recieved a 0530 CABNE today, here are my stable results.

http://valid.x86-secret.com/show_oc?id=98573

I'm rather happy with it.

**coop** · 06-06-2006, 11:01 PM

A 32m Spi with my 148@3588 http://www.xtremesystems.org/forums/...&postcount=174

**Venom-Crusher** · 06-12-2006, 01:56 PM

Opteron148 CABYE 0543 FPMW @ 3.15GHz Water Cooled 1.53V. Prime not stable since 3.0GHz...

**EOCFqwerty** · 06-13-2006, 03:19 AM

Originally Posted by coop

That's a pretty nice chip Killer. I got a 148 a couple days ago. Trying it out last night, 32m Pi @ 3300mhz and a 1m @ 3496. 1.63v. Will do more tonight.
http://img.photobucket.com/albums/v1...2532m33301.jpg

http://img.photobucket.com/albums/v1...25/5251m23.jpg

what stepping is that?

**girth_maul** · 06-13-2006, 03:33 AM

Originally Posted by Kain XS

Opteron 146 CABYE 0540FPAW @ 3.00ghz Swiftech Apex Ultra Cooled 1.58v

Nice oc, i'm planning to chuck mine(same stepping) under phase fairly soon. Does your chip run hot on air, as mine has always been a hot one?

**starostise** · 06-15-2006, 01:49 PM

hi all.

here is my new opty 144 just received today.
tested under freezer 64 pro with 23-24Â°C ambiant temp, ihs on
stepping CAB1E 0614DPCW

very nice chip here

**starostise** · 06-19-2006, 02:07 PM

some new test with this opty.

awefull coldbug at 390 HTT for +40Â°C

so it's only good with air/water and stability.

max spi 1M:

max screen always aircooled:

Thread: The Official Opteron 939 Overclocking Thread

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions