Dam it Coolaler I just fell out of my freaken chair.
Dam it Coolaler I just fell out of my freaken chair.
Last edited by coolaler; 05-27-2006 at 03:02 PM.
Congrats on the WRs!![]()
![]()
![]()
![]()
![]()
Your on fire!
Last edited by BeyondSciFi; 05-24-2006 at 05:56 PM.
Accept nothing, challenge everything. ~ Anonymous
This is getting beyond insane.
Coolaler: is that an FSB wall I see at 450MHz? You don't seem to be moving up from that.
My watercooling experience
Water
Scythe Gentle Typhoons 120mm 1850RPM
Thermochill PA120.3 Radiator
Enzotech Sapphire Rev.A CPU Block
Laing DDC 3.2
XSPC Dual Pump Reservoir
Primochill Pro LRT Red 1/2"
Bitspower fittings + water temp sensor
Rig
E8400 | 4GB HyperX PC8500 | Corsair HX620W | ATI HD4870 512MB
I see what I see, and you see what you see. I can't make you see what I see, but I can tell you what I see is not what you see. Truth is, we see what we want to see, and what we want to see is what those around us see. And what we don't see is... well, conspiracies.
good. god. Conroe is going to hit 5!!!!!!!!!!!!!! I can not believe this, this is amazing.
OMG. This is soing fast!
It seems that the CPU is hitting the limit - or is it in fact the board/FSB?
WHat cooling are you using for the Northbridge?
Outstanding work!
hooollyyy smookkeee all this wuth out changing the stock volts ..damn this really got to be a dreammm....Can we say Conroe is on FFFFIIIRRREEEEEE![]()
![]()
![]()
![]()
![]()
![]()
coolaler,
Fantastic work, AGAIN!!!!!! Thanks for sharing!
when I see stuff like this... I honestly don't even think AMD could possibly do anything to combat this thing...
with Conroes already getting near 5 ghz, and AMD still stuck at the 4 ghz mark... yet conroes are just destroying 4 ghz A64's even at much lower clocks... I can't even guess how a A64 can ever compete with these things... it would take like a 5 ghz A64 to even start...
Intel is just on fire with these things![]()
Wow, a 90% overclock on a brand new architecture. LN2 or not, that is still quite a feat. This is equivalent to a 7.2Ghz P4 from a 3.8Ghz stock core, and Netbust was much more mature at that point.
My word, this is getting real crazy now
4.5GHz Conroe... Insane indeed![]()
No doubt that sub-zero amd records will fall to conroe rigs on air.
E8400 @ 3.84Ghz 1.25v LOAD
ABIT IP35 PRO
4 GB G.SKILL F2-8000CL5D-4GBPQ
EVGA 8800 ULTRA 660/1110
PC POWER & COOLING 750 QUAD
THERMALRIGHT ULTRA 120 EXTREME
2 X SEAGATE BARRACUDA ES.2 ST3250310NS 250GB RAID 0
I meant in terms of overclocking ability. Obviously, performance wise, a Conroe absolutely decimates the P4 in most tasks.Originally Posted by SoulGG
Mind you, Intel is obviously leaving room for future speed bumps, but for a brand new architecture on the earliest revisions/steppings, this is remarkable. Usually the first couple batches of chips on a new architecture are terrible overclockers.
Before it is even releasedgood. god. Conroe is going to hit 5!!!!!!!!!!!!!! I can not believe this, this is amazing.And not even XE yet
![]()
What the world needs is more geniuses with humility, there are so few of us left.
DS3 | E6400 - 3.2GHz | OCZ PLat. PC6400 | 6800GT | Zippy 460W
Very true.Originally Posted by Ron 61
With the more recent Intel chips, it's not really like that. Conroe has an advantage, becuase Intel used the 65nm process for Presler and Yonah so it's already mature. It would be interesting to see how another stepping would affect that power consumption and scability of Conroe though. With Cloverton being based on Woodcrest, a C0 stepping would help the entire Core family.Originally Posted by ethernal
I was referring to the architecture, not the process. For Intel, 65nm can now be considered a mature process. The Core architecture, however, is not.
As far as your other examples, they aren't all that great. The Presler was more or less just a die shrink, so the architecture remained the same. Yonah, while a somewhat major architectural upgrade, had a FSB wall (which seemed to be chip-based, not MoBo based, but I could be wrong).
I'm not saying it's a miracle or anything, but it is still quite an achievement to have such early chips do so well when it comes to overclocking potential and associated stability. Computer simulations only tell you so much; how the silcon actually performs with real volts going through it is something else entirely.![]()
if you get coolalers result in 1mx3 you get fx-62 stock if you have the best DDR2
OK, I gotta ask: what cooling on the NB and what PLL chip is on that board???? Cab you give me/us the PLL manufacturer/model please? 460FSB is crazy!
VERY awesome coolaler, I've never seen anything like it. I was never a big fan of MSI mobos, but this one looks unstoppable!
iterations where are you? Where's your chart? Add these scores!![]()
4.5Ghz amazing
*Intel Pentium 4 3.00Ghz @ 4.05Ghz 28c Idle & 36 Full Load*
*Platinum Edition MSI 865PE NEO2 PFS Mobo*
*Aspire X-Cruiser Case*
**soon to be 65nm PD 3.0GHz**
Awsome coolaler just awsome! Will we see some 3DMARKS soon?![]()
Intel FTW!
Beanna
Bookmarks