...compared to something like 400 fps.Originally Posted by 3NZ0
...compared to something like 400 fps.Originally Posted by 3NZ0
ASRock 939Dual-SATA2 (04XX)
O165 CCBWE 0551 UPMW 1.8 GHz @ 2.6 GHz (9x289x4) 1.525V IHSless (SI-120 Bolt Modded)
Corsair XMS 2GB DDR-400 2-3-3-6 2.75V @ DDR-473 3-3-2-1 2.5V
ATi X800 Pro 475/450 @ 535/500
SB Audigy 4
Samsung 80GB 2MB PATA HDD
3DMark05: 6000
Ishkur's Guide To Electronic Music
3dmark06 score before driver, cpu @ 255x11, vid @ 688/792 slave @ 648/774:
Main Test Results
3DMark Score 9575 3DMarks
SM 2.0 Score 4215 Marks
SM 3.0 Score 4680 Marks
CPU Score 2143 Marks
After driver:
Main Test Results
3DMark Score 9757 3DMarks
SM 2.0 Score 4323 Marks
SM 3.0 Score 4759 Marks
CPU Score 2173 Marks
nice resultsOriginally Posted by cadaveca
![]()
Core 2 Quad Q6600 @ 3GHz . DFI DK P45-T2RS Plus . XFX 9800GT 512MB . 8GB OCZ Blade PC2-9200 . WD6400AAKS AHCI .
Creative X-Fi XtremeMusic . Hanns.G 28" LCD . Thermalright U120-E . Seasonic S12 600w . Windows 7 Professional E Retail x64 .
Not bad at all. I am getting very tempeted to try them now. Perhaps a system restore checkpoint just in case....
*CPU: Xeon X5650 @ 4.3 Ghz | Cooler: Thermaltake Water 2.0 Extreme
*Asus Rampage III Formula | RAM: 36GB DDR3 (Tracer LED + Hyper X Savage)
*Video Cards: Gigabyte Aorus 1080ti
Sound Card: Sound Blaster Z | PSU: Corsair HX1000W | Display: BenQ PD3200u | JVC RS520 projector
*Case: CoolerMaster HAF X (932 side panel) | Others: Roccat Kone AIMO | Roccat Alumic | Logitech G15 |Cameras: Sony A7R3 | RX100 V
I'm running Opty at 2.8ghz. Super Pi 1M 30.250 before driver install. 30.047 after install.
No problems here.
Just updated but havent seen any improvement really. Unfortunately I just realized I changed 1 mem timing yesterday that makes my current comparison unreliable so I am gonna test again with the exact timings and see what I get.
Regards
*CPU: Xeon X5650 @ 4.3 Ghz | Cooler: Thermaltake Water 2.0 Extreme
*Asus Rampage III Formula | RAM: 36GB DDR3 (Tracer LED + Hyper X Savage)
*Video Cards: Gigabyte Aorus 1080ti
Sound Card: Sound Blaster Z | PSU: Corsair HX1000W | Display: BenQ PD3200u | JVC RS520 projector
*Case: CoolerMaster HAF X (932 side panel) | Others: Roccat Kone AIMO | Roccat Alumic | Logitech G15 |Cameras: Sony A7R3 | RX100 V
Do these get installed even if your not using Cool and Quiet
Yes, I don't use CnQ
Intel i7-3770S l Thermalright Venomous X l Asus Sabertooth Z77 l 8GB G.SKILL Sniper Low Voltage l ??? l Samsung 830 256GB l Areca ARC-1200 l WD Caviar GreenPower 1TB (RAID1) l Pioneer BDR-207DBK l Creative X-Fi Titanium HD l Kingwin Stryker l Antec SOLO II l HP LP2475w
can i use those on the opteron dual core ? or only for X2 ?
EDIT:
nvm i just downloaded it and installing now but gonna run everest before doing it
Last edited by Okda; 05-20-2006 at 09:44 AM.
Soon to be :
ASUS P8P67 Deluxe, Intel SB i7-2600k, G.Skill Rj-X F3-12800CL6D-4GBXH, MSI HD6950 2GB, Corsair 750AX, Intel 80GB G2 SSD, DELL U2410
Used to be: SaFrOuT
u can use it for dc.
Everest.Ultimate.Edition.2006.2.80.534 results
======= ====Before ====After
CPU Queen ==== 4636 ==== 4636
CPU PhotoWorxx ====20632 ====20969
CPU Zlib ====28561 ==== 28581 KB/s
FPU Julia ====2725 ====2726
FPU Mandel ====4034 ====4034
FPU SinJulia ====2505 ====2506
Soon to be :
ASUS P8P67 Deluxe, Intel SB i7-2600k, G.Skill Rj-X F3-12800CL6D-4GBXH, MSI HD6950 2GB, Corsair 750AX, Intel 80GB G2 SSD, DELL U2410
Used to be: SaFrOuT
I think you guys are all crazy for expecting these to affect the performance. IMO. Probably for Windows to properly identify AM2 chips, or maybe for AM2 chips to support C&Q...
i5 750 4.20GHz @ NH-D14 | 8GB | P7P55DLE | 8800U | Indilinx SSD + Samsung F3 | HAF922 + CM750W
Past: Q6600 @ 3.60 E6400 @ 3.60 | E6300 @ 3.40 | O165 @ 2.90 | X2 4400+ @ 2.80 | X2 3800+ @ 2.70 | VE 3200+ @ 2.80 | WI 3200+ @ 2.75 | WI 3000+ no IHS @ 2.72 | TBB 1700+ @ 2.60 | XP-M 2500+ @ 2.63 | NC 2800+ @ 2.40 | AB 1.60GHz @ 2.60Originally Posted by CompGeek
I think this driver will enable independent core management for new AM2/TurionX2 revisions, and/or is fixing small bugs as stated in http://www.dailytech.com/article.aspx?newsid=2426
![]()
RiG1: Ryzen 7 1700 @4.0GHz 1.39V, Asus X370 Prime, G.Skill RipJaws 2x8GB 3200MHz CL14 Samsung B-die, TuL Vega 56 Stock, Samsung SS805 100GB SLC SDD (OS Drive) + 512GB Evo 850 SSD (2nd OS Drive) + 3TB Seagate + 1TB Seagate, BeQuiet PowerZone 1000W
RiG2: HTPC AMD A10-7850K APU, 2x8GB Kingstone HyperX 2400C12, AsRock FM2A88M Extreme4+, 128GB SSD + 640GB Samsung 7200, LG Blu-ray Recorder, Thermaltake BACH, Hiper 4M880 880W PSU
SmartPhone Samsung Galaxy S7 EDGE
XBONE paired with 55''Samsung LED 3D TV
well i hope it lets me reach 40K![]()
Not by a single pointOriginally Posted by GoThr3k
![]()
i5 750 4.20GHz @ NH-D14 | 8GB | P7P55DLE | 8800U | Indilinx SSD + Samsung F3 | HAF922 + CM750W
Past: Q6600 @ 3.60 E6400 @ 3.60 | E6300 @ 3.40 | O165 @ 2.90 | X2 4400+ @ 2.80 | X2 3800+ @ 2.70 | VE 3200+ @ 2.80 | WI 3200+ @ 2.75 | WI 3000+ no IHS @ 2.72 | TBB 1700+ @ 2.60 | XP-M 2500+ @ 2.63 | NC 2800+ @ 2.40 | AB 1.60GHz @ 2.60Originally Posted by CompGeek
Probably exact same drivers just support for the next gen chips!
I was spot on... It's a fix when coming out of standby..
http://www.dailytech.com/article.aspx?newsid=2426
Lian Li V2000+ Modded
Intel Core I7 920 @ 3.8Ghz 1.325v Thermaltright Ultra 120 Extreme RT1366
Asus Rampage Extreme 2
OCZ 3x2GB DDR3 1600 Platinum
EVGA GTX460 768MB 850/1700/2100Mhz SLi
EVGA 8800GT SSC 730/1800/2000Mhz
Corsair HX850W
Well I have CNQ disabled and my voltage seems very erratic with the new driver. The range is 1.39 to 1.44!! And that's idling.
Asus Commando Bios 1605
Vista Home Premium X64
Intel e8400
Scythe Infinity Push-Pull
Thermaltake Spirit 2 on NB & SB
4x1gb Corsair Dominator 8500C5D@1040MHZ
Raptor 150GB HDD
Raptor 74GB HDD
XFX 8800 XXX Edition
Samsung DVD SHS183L
Pioneer DVD 212D
Silverstone TJ09
PC&P Turbo-cool 1000w
these just for DC chips?
Specs
Asus 780i Striker II Formula
Intel E8400 Wolfdale @ 4050Mhz
2x2GB OCZ Platinum @ 1200Mhz 5-4-3-18
MSI 5850 1000Mhz/5000Mhz
Wester Digital Black 2TB
Antec Quatro 850W
Cooling
Swiftech Apogee
Swiftech MCP-600
HardwareLabes Black Ice Extreme 2
Audio Setup
X-fi w/AD8066, Clock mod, & polymer caps > PPAV2 > Grado SR60 & Grado SR325i & Beyerdynamic DT770 Pro & Beyerdynamic DT990 & AKG K701 & Denon D2000
Nice findOriginally Posted by NightCrawler™
I think all these "performance increases" from installing the driver is just a result of a fresh reboot from installing the new driver. :P
All I could find in the knowledge base:Originally Posted by 865pe
http://support.microsoft.com/?kbid=827180
Do you have a boot.ini? Copy and paste what it contains.
Typing "fixboot" in the recovery console will rebuild your boot.ini
Last edited by krylon; 05-21-2006 at 08:34 AM.
thanks problem fix...Originally Posted by krylon
new noteped ( boot.ini) copy to driver C: fix
![]()
Last edited by 865pe; 05-21-2006 at 08:57 AM.
Q6600 1.390v 3.8G Vid: 1.2125Thermalright Ultra-120 Extreme .DFI LanParty DK P35-T2RS. Crucial Ballistix Tracer 8500 2x1GB.. Seagate 410As Raid0 .. Sapphire HD4870 512mb & Cooling Thermalright HR-03 GT.. 19 LG 1950SQ .. Silverstone OP850 watt. Case Gigabyte Auro3D
This driver enables the CnQ with only the selection of "Min. Power Management" in power management option, even CnQ is disabled in bios..
no probs or performance increase detected
| a64 3000+@6x250 1.0v winnie cbbgd 0440 rpdw | epox 9nda3+ rev1.0 |
| team 2x1gb uccc ddr500 3-4-3-8 1T 2.60v | sapphire ati9000pro | enermax noisetaker 370w |
Bookmarks