Conroe E6600es on Air
Intel 975xbx v304
Leadtek 7900gtx on stock
Maxline 300G IDE
in 3Dmark05, single card, about 200scores higher if with the same GPU clk than my Yonah=3005mhz
1. conroe with 79gtx 745/1030
2. yonah 3G with 79gtx 745/1080
Conroe E6600es on Air
Intel 975xbx v304
Leadtek 7900gtx on stock
Maxline 300G IDE
in 3Dmark05, single card, about 200scores higher if with the same GPU clk than my Yonah=3005mhz
1. conroe with 79gtx 745/1030
2. yonah 3G with 79gtx 745/1080
Last edited by VictorWang; 05-20-2006 at 06:03 AM.
nice with 7900GTX SLI ?
---
nice but if its only a difference of 200 on the yonah and the conroe is on 333fsb.... then the conroe lacks performance increase to my opinion and its just a pumped bus speed.
oh btw what vcore and temps?
Originally Posted by Movieman
no, it's 275 on the Yonah and 333 on the Conroe.
Here's my contributionSingle 7900gtx, x2 on air......
Victor...get on MSN...I need to ask you something
Tweaked OS??
i have 13015 with a64 2937MHz + x1900xtx 720/850 stock volts/cooling
but that isnt a tweaked os, and it was merely a quick test :p
If the question is directed at me...nope...no tweaks...just regular xpsp2 install
Edit...now that I've re-read your post...I bet you're running a single core
Last edited by s7e9h3n; 05-19-2006 at 06:05 AM.
no it wasnt directed to you
but thx anyway
http://service.futuremark.com/compare?3dm05=1929143
that my score, idd single core
not any tweak.
200score with just a SINGLE CARD in 3Dmark05 is huge !
btw .... the card was running at 745/1100 with Yonah @ 273*11 , score=13478
to steve. this hdd i'm usning now don't have a MSN, I'll talk to you tomorrow
does a slow/fast HDD affects your score? maybe a silly question, but still
no msn => nlited OS??
Yonah system:does a slow/fast HDD affects your score? maybe a silly question, but still
no msn => nlited OS??
pcie=115mhz
ram=455mhz 4-3-2-4
hdd= Raptor 740GD
os=winxp sp2 (newly installed)
conroe system:
pcie=109mhz
ram=345mhz 4-3-2-8
hdd=maxlineIII 300G IDE
os=winxp sp2 (used for 2month)
so... if with the same HW, the difference maybe more than 250 scores
There's a big difference in the ram speed there too.
Intel FTW!
Beanna
Well, I don't have GTX but here is x1900xtx 840/880 and yonah 2950Mhz
Score 14552
http://service.futuremark.com/compare?3dm05=1997967
xtx stock is around ~12600, maybe more, don't remember
Last edited by kiwi; 05-19-2006 at 06:39 AM.
...
never compares x1900xtx with 79gtx in 3Dmark05.Well, I don't have GTX but here is x1900xtx 840/880 and yonah 2950Mhz
Score 14552
http://service.futuremark.com/compare?3dm05=1997967
xtx stock is around ~12600, maybe more, don't remember
3G yonah with my 1900xtx @ 792/882 , 05=143xx
Can't we compare superpi? I guess I would beat you :P
Lol, those conroes are like over 1minute faster than this old celly.
Anyway nice overclock and a nice chip. These Conroes make my hardware heart beating faster
I have a 3 gig p4 northwood that does Super Pi 1M in 41 secs. I'm not bragging btw, you asked for a comparison
not any CPU available right now ( for desktop/laptop ) can beat Conroe in Super_pi.....
so... I don't wanna post that boring test :p
You should run the CPU test? That should be included if there's a point doing a comparing.Conroe E6600es on Air
Intel 975xbx v304
Leadtek 7900gtx on stock
Maxline 300G IDE
in 3Dmark05, single card, about 200scores higher then my T2400@273*11=3005mhz
Thanks for the post.
It's the same setup and overclock target I want to do.
Was it hard to reach 1333fsb or there is still lot of room ?
very easy going.
room temp=25c
Tower120 cooling ( just putting on the chip but not mounted on )
stock volt.('cos now I cannot change it )
stock fsb=266mhz
Host Burnning=25% ( 333mhz ) , and sp2004 stable at 30%(345mhz)
you can see in Fugger's and FCG's treads, all stable at 400fsb with ease
Intel FTW!
Beanna
XS cooling for the NB and the Chip
Isn't that the only way to go my friend?
Intel FTW!
Beanna
Thanks for the info !very easy going.
room temp=25c
Tower120 cooling ( just putting on the chip but not mounted on )
stock volt.('cos now I cannot change it )
stock fsb=266mhz
Host Burnning=25% ( 333mhz ) , and sp2004 stable at 30%(345mhz)
you can see in Fugger's and FCG's treads, all stable at 400fsb with ease
I'm a bit the black sheep of this forum. I like overclocking, but I never raise Voltage. So if this chip can handle 3Ghz everything stock, it's very good news.
Can't wait to get mine.. Waiting with credit card in hand :p
Just for the fun of comparison, my 2.8ghz Northwood running at 3Ghz do PI in 50.3 seconds
That will make a good upgrade :p
Last edited by Vric; 05-19-2006 at 01:05 PM.
STEPHENHere's my contribution
Victor...get on MSN...I need to ask you something
You running 2.6Ghz or 3.0Ghz here ? Did speedstep kick in or what.
That AMD is pretty close.
Posting Permissions
Reply With Quote
Bookmarks