Intel 65nm overclocking thread

**jVIDIA** · 05-14-2006, 04:33 AM

This is a shame that we need to lap the new Intel CPU's !!

My 920D IHS is concavous in the middle !!! I get at full load 53Âº with WC when at 4.2@1,485v !!

SHAME ON YOU INTEL !

Anyone knows if Intel is aware of this IHS problem ??
I hope they correct this mess with the Conroes.

**JoeBar** · 05-14-2006, 04:35 AM

Originally Posted by PcCI2iminal

Presler 940 runs very hot and im using a Scythe 120mm @ 46.5CFM ,just enough for 1.425v ,

thats what i got

940 @ 4ghz idle
Ninja 55C
Thermaltake BT 54C
Thermalright HR-01 56C

930 @ 4ghz idle
Ninja 36C
Thermaltake BT 36C
Thermalright 38C

this chip is new, april 26th
i got a good one i think

what temps you got on load??

room temp @ 23C

My chip is 19th April. With 25'C room temp, i'm getting 45'C load @ 4.52ghz so temp isn't a prob...

**jVIDIA** · 05-14-2006, 04:58 AM

and at iddle ?

**PcCI2iminal** · 05-14-2006, 05:40 AM

Originally Posted by jVIDIA

This is a shame that we need to lap the new Intel CPU's !!

My 920D IHS is concavous in the middle !!! I get at full load 53Âº with WC when at 4.2@1,485v !!

SHAME ON YOU INTEL !

Anyone knows if Intel is aware of this IHS problem ??
I hope they correct this mess with the Conroes.

my HIS is perfect i think

Presler @ 4270mhz cooler box @ 63c full load

the only problem is about the hughe TDP ,lets wait for rev C1

My chip is 19th April. With 25'C room temp, i'm getting 45'C load @ 4.52ghz so temp isn't a prob...

24/7 rite?

and for benching?

**JoeBar** · 05-14-2006, 07:54 AM

Originally Posted by PcCI2iminal

24/7 rite?

and for benching?

I never check out bench frequencies. I just check 24/7 oc.

**nFo** · 05-14-2006, 09:57 AM

Intel Pentium 4 / 661 ES:
3600 MHz @ 5749 MHz
Corsair TWIN2X1024-5400C4 / 2 x 512 MB
Asus P5WD2-E Premium / Intel 975X / Vmods by: Persivore
OCZ Powerstream 600 watt
Vapochill LightSpeed + Delta Extreme
More specs here.

Pifast stable @ 5749 MHz: http://img306.imageshack.us/my.php?image=39307pa.png

http://valid.x86-secret.com/show_oc?id=91711

FSB:

**nutcase** · 05-14-2006, 10:13 AM

present specs:

Asus P5WD2-E premium (fully Modded)
Intel Pentium D 940 @ 5613 Mhz, 1.8V Vcore (under Dry Ice)
1GB of OCZ PC2-8000 Plat XTC
ATI Radeon X1900 Crossfire edition (master card)
ATI Radeon X1900XTX (slave card) (cards running at 690/800)
1 16x DVDRW
1 120GB HD
OCZ GameXtream 700W Psu

and it is 3Dmark06 Stable at these settings:

http://service.futuremark.com/compare?3dm06=293782

as soon as I figure out ATItool, should get close to breaking 12K in 3dmark06.

**krylon** · 05-14-2006, 11:57 AM

Originally Posted by hag6br

present specs:

Asus P5WD2-E premium (fully Modded)
Intel Pentium D 940 @ 5613 Mhz, 1.8V Vcore (under Dry Ice)
1GB of OCZ PC2-8000 Plat XTC
ATI Radeon X1900 Crossfire edition (master card)
ATI Radeon X1900XTX (slave card) (cards running at 690/800)
1 16x DVDRW
1 120GB HD
OCZ GameXtream 700W Psu

and it is 3Dmark06 Stable at these settings:

http://service.futuremark.com/compare?3dm06=293782

as soon as I figure out ATItool, should get close to breaking 12K in 3dmark06.

Do you think 2GB of ram would boost your scores much?

**nutcase** · 05-14-2006, 06:35 PM

Originally Posted by krylon

Do you think 2GB of ram would boost your scores much?

2GB does not help much in 3Dmark scores that I have seen. BUT, In newer Games, That is a whole different story

**JoeBar** · 05-15-2006, 09:17 AM

Originally Posted by hag6br

2GB does not help much in 3Dmark scores that I have seen. BUT, In newer Games, That is a whole different story

U're chocking your very nice system with just 1gb. But i guess u allready know that...

**nutcase** · 05-15-2006, 01:50 PM

Originally Posted by JoeBar

U're chocking your very nice system with just 1gb. But i guess u allready know that...

yep.. But it is a benching rig.. Nobody runs Dry Ice and 1.8V Vcore on an everyday rig

**PcCI2iminal** · 05-15-2006, 06:02 PM

Originally Posted by hag6br

present specs:

Asus P5WD2-E premium (fully Modded)
Intel Pentium D 940 @ 5613 Mhz, 1.8V Vcore (under Dry Ice)
1GB of OCZ PC2-8000 Plat XTC
ATI Radeon X1900 Crossfire edition (master card)
ATI Radeon X1900XTX (slave card) (cards running at 690/800)
1 16x DVDRW
1 120GB HD
OCZ GameXtream 700W Psu

and it is 3Dmark06 Stable at these settings:

http://service.futuremark.com/compare?3dm06=293782

as soon as I figure out ATItool, should get close to breaking 12K in 3dmark06.

well done man

last update on air

http://valid.x86-secret.com/show_oc?id=93722

M/B ：Asus P5WD2-E
CPU ：Presler 940 @ 5050mhz 1.45v Date Pack 04/26/2006
CPU Cooling ：Thermalright HR-01(120mm x 1200rpms)
MEM ：GSKILL F2-6400PHU2 2x512mb (Elpida)
HDD ：Hitachi 80GB ata 100 7200rpms
VGA CARD ：7900GTX
POWER: Zippy Type R
OS ：WIN XP SP2
room temp：19C

**IluvIntel** · 05-16-2006, 03:02 AM

Hey, no.6 on the ORB in 3DMark06 with Pentium D & single X1900XTX - all done with 930 & auto Vcore @ only 3847Mhz.

not bad for A$345 chip.

http://service.futuremark.com/compare?3dm06=299212

**adeoliver** · 05-16-2006, 07:23 AM

Wow PcCI2iminal, that is one hell of a chip you have there. Where did you pick that up at and when? Those are some awsome air scores. No board mods at all huh? Dang. What bios are you using with the EP?

**NiCKE^** · 05-16-2006, 09:02 AM

Amazing PcCI2iminal! Where's the max prime clock?

**PcCI2iminal** · 05-17-2006, 04:36 AM

Originally Posted by adeoliver

Wow PcCI2iminal, that is one hell of a chip you have there. Where did you pick that up at and when? Those are some awsome air scores. No board mods at all huh? Dang. What bios are you using with the EP?

date pack is 04/26/2006

i buyed in JP 5 days ago

What bios are you using with the EP?

this is a new one P5WD2-E and im not sure about bios,i will check for you

Where's the max prime clock?

this rig is only for benching and i never tryed a prime on this ,i think 4.5ghz will be easy for 24/7 with Thermalright HR-01

**jVIDIA** · 05-17-2006, 07:27 AM

Is that 940 one of the new Stepping C1 ones ?

How can we see in the box / IHS if one 930/940 is already stepping C1 ?

**JoeBar** · 05-17-2006, 12:17 PM

Originally Posted by jVIDIA

Is that 940 one of the new Stepping C1 ones ?

How can we see in the box / IHS if one 930/940 is already stepping C1 ?

If u look @ the cpu-z screen u'll see that it's a B1 chip.

**PcCI2iminal** · 05-17-2006, 02:18 PM

**proth** · 05-17-2006, 05:51 PM

631 0n DICE:

1M SP:

32M SP:

**jVIDIA** · 05-18-2006, 12:29 AM

The C1 ones are already on sale ?

**IluvIntel** · 05-18-2006, 04:36 AM

No.1 Pentium D & single X1900XTX on the ORB with auto Vcore !

for 3DMark03 full test suite.
No.5 single X1900XTX overall regardless of processor.
Seems GT4 is very sensitive to system ram and Vram speed and timings.

http://service.futuremark.com/compare?2k3=4791945

**JoeBar** · 05-18-2006, 09:50 AM

Originally Posted by jVIDIA

The C1 ones are already on sale ?

From what i know they aren't yet...

**adeoliver** · 05-20-2006, 10:08 AM

I thought they were supposed to be shipping when the 960 came out? Im just going to wait for newegg to run out of the 950's and 940's a couple times before I buy another chip. Im also waiting for reports of people getting the C1's in then Ill jump on a couple.

**IluvIntel** · 05-21-2006, 04:44 AM

I had a look today on the Intel Proc spec finder list and the C1's are still not listed for Pentium D's. Here
Same for 6x1 series here

Don't see why they could be retail yet.

Thread: Intel 65nm overclocking thread

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions