A64Info - New CPU ID and memory tweaking tool! - feedback welcome...

[lukija]

No problem. Just wanted to add my support for your work on this. I'd even throw 10 bucks in a tip jar for you, if you set one up.

10x for your support Only thing I need is spare time and good documentation.

[Eldonko]

lukija is it possible to mod the proggie for AM2 platform you think?

[2fink]

the program is really good! used it since the first boot into windows i did with my new cpu!
no bugs found till now!

[npk]

Excellent program dude! it´s being added to my list.

[lukija]

lukija is it possible to mod the proggie for AM2 platform you think?

There should be no problems. I only need documentation. As far as I know, Systool already supports AM2.

[lukija]

the program is really good! used it since the first boot into windows i did with my new cpu!
no bugs found till now!

There is one "bug", but consider it as a problem with undocumented dividers. It is about 180 divider. A64Info math is based on Oskar Wu's table, where 180 divider is actually 183.00MHz. I had dilemma is it 183.00 or 183.33 ..... (which is more "natural" for computer world). In most cases it should not make problems except for 11 multiplier. Let me explain:

183.33 : 200 ratio is 11/12 = 0.9166666666666666667
183.00 : 200 ratio is 0.915

so with 11 multi , divider should be:

a) round(11 / 0.9166666666666666667)=round(12)=12
b) round(11 / 0.915)=round(12.02)=13

Until couple days ago i used b) scenario but after I saw this post

http://www.xtremesystems.org/forums/...&postcount=100

now I think it should be a) scenario.

Bottom line: no other multis are affected, only 11 with 180 divider.

Offcourse, there is problem with XP 64bit, some cores are recognised wrong, but it will be fixed thaks to your feedback and suggestions

[Stelios]

And i was wondering why my Winbond BH6 doesn't work at 253Mhz at 300X11*183

A64 Memfreq 1.1 also calculates it the same way (wrong)

I lost 1 day testing my memory cause of that error ...

[lukija]

Stelios, your story is just confirming the fact that divider is actually 12, you tought it was 13 and expected your memory to work @ 253MHz but it was(not) working at 275MHz.

[Eldonko]

There should be no problems. I only need documentation. As far as I know, Systool already supprorts AM2.

Yes it does and that's great, keep up the good work!!

[Plywood99]

Yah, keep up the good work Lukija. I have your proggy setup with a shortcut in my windows startup folder. Have not a had single problem yet.

[Magnj]

great job man!

[lukija]

Here is how A64Info is looking, some functionality is missing, library is not 100% finished ... Executable is siginificantly smaller (~ 250kB)

[dz`]

Great program

[Plywood99]

Here is how A64Info is looking, some functionality is missing, library is not 100% finished ... Executable is siginificantly smaller (~ 250kB)

Like the new look Lukija. When will it be released???

[OnLine]

Stelios, your story is just confirming the fact that divider is actually 12, you tought it was 13 and expected your memory to work @ 253MHz but it was(not) working at 275MHz.

Yep!



I've been using 11x273 @ 183 divider for a long time now and performance/bandwidth/stability seems the same as when using settings@pic above.

12 divider it surely is ...

- nice prog!

[lukija]

Like the new look Lukija. When will it be released???

In a week, or so. Cannot promise. Maybe I can release some alpha version as soon as I finish basic functions

[lukija]

Good news, it works under WinXP 64-bit.

[Pyr0]

great news

[soundx98]

schwing

[lukija]

Ok guys, it is not yet finished version (loading and saving profiles is not implemented yet, also load at startup). But you can change stuff and it should work under 32 or 64bit Win. 180 divider is fixed (11/12), core detection (Venus vs San Diego and S754 Venice). CAS 1.5 should be detected OK. One will notice that there is slight delay after pressing Set button. I had to do it because sometimes when changing memlck in big steps (eg, from 200 to 120) it can freeze. I will explain it later, when final version arrives. Once again, this is still not finished, take care, backup your data and stuff.

[soundx98]

yeah baby, working in x64 Edition now.

[audiofreak]

yeah baby, working in x64 Edition now.

Glad to hear that because I wrote those new drivers and I/O library which lukija is using now.

[twisted5]

This is one nice piece of software. I can't wait till I can get rid of clockgen and just use this alone Thanks for all the hard work lukija and audiofreak on the lib/drivers.

[[XC] 4X4N]

Again, great job on this lukija ,but I like the look of the old version with the cpu info and ram timings all in one window. Anyone else?

[timpanogos]

I used it to tweak my new ocz 4800, great stuff, love it and thanks