T2600+HIS 19XT Crossfire, 3Dmark05=20078, pi_32m=15min05sec

[VictorWang]

Though had a lot of trouble today to get 6kg DI and had my mobo moded.
Got reward at last.........
3Dmark05=20078 with HIS 19xtx Crossfire
superpi_32m=15min05sec @ 3640mhz (mas fsb reached 292mhz)



1.3Dmark05=20078 with HIS 19xtx Crossfire by WaterCooling @ 747/882
World's No.5 .........
ORB: http://service.futuremark.com/compare?3dm05=2014983



2. 3Dmark06=12142 , World's No.8......but forgot to submit the results



3. pi_32m = 15min05sec




How can I listen to the Aopen's RD
bios=1.03c still have coldbug......
if temp lower than -33c
bios read=125c and will not let you enter the OS!
and... if lower than -45c... you cannot do any benchmark even pi_1m
holy !!!!!
so I have to control the temp arround -30c to enter the OS
then ... control the temp above -42c to initiate the benches....
sooooooooo tied.
How can I be so stupid that haven't done a T-Core Mod.

[blind_ripper]

nice scores wang
sure u are stuppid if u dint do them

[VictorWang]

nice scores wang
sure u are stuppid if u dint do them

yes..........I know I am stupid

[\Karting_freak]

are those his cards that have a very nice arctic cooling heatsink?

[blind_ripper]

yes..........I know I am stupid

no problem m8 u will get a rerun i hope

[Tyrou]

nice start

the Tcore mod is definitely the most useful on this board, but is quite hard to make, I didn't have the soldering skills to do it by myself, I asked a friend

[Xtasy]

yeah mod the board and than you ll be nr 1

[VictorWang]

nice start

the Tcore mod is definitely the most useful on this board, but is quite hard to make, I didn't have the soldering skills to do it by myself, I asked a friend

i don't have the soldering skills toooooo so do the same as you.
but...........forgot the TCore Mod , that's pity.

[Hystrix^]

Very nice start Victor and good luck with the further tests.

Hystrix

[n00b 0f l337]

I think you want phase change on that chip. More constant non-expendable cooling.

[Blacklash]

Victor,

What voltage settings are you using on your graphics cards with ATi Tool?

[metro.cl]

grat start mate

get someone to vmod your mobo

[VictorWang]

grat start mate

get someone to vmod your mobo

serching for better chip now.......
and looking for a DETAILED and WORKED T-Core Mod


to malficar, my vga card = 1.55v/2.19v/2.19v/1.486v

[nCrusader]

Nice 3D06 cpu-score, highest i've seen from yonah/merom.

[Blacklash]

serching for better chip now.......
and looking for a DETAILED and WORKED T-Core Mod


to malficar, my vga card = 1.55v/2.19v/2.19v/1.486v

Thanks,

Looks like I am going to have to go to water cooling. If I put that on my cards they will likely lock.

Nice scores! I am eager for my Conroe so this Crossfire configuration can really stretch its legs.

[mike]

Great scores Victor! Awesome.

If you'd be a little bit colder you wouldn't need the TCore mod - seems only from 40-85C it is really needed

[VictorWang]

Great scores Victor! Awesome.

If you'd be a little bit colder you wouldn't need the TCore mod - seems only from 40-85C it is really needed

@.@ i'llllllllllll try