I cheated Used a boxed one
Getting better with vcore mod ram is @ 4-4-4-12 @ 2.05v Patriot 5300 I can't tighten it up any at this v setting. I'm still on air with some left in it.Originally Posted by Dumo
Thanks for the help with hdw. Dumo and Fugger
Last edited by runmc; 04-25-2006 at 12:24 PM.
nice!! wats vcore @? dats wat im hoping for with higher v.Originally Posted by runmc
btw, like ur sig runmc - Jesus - sweet saviour
Last edited by NapalmV5; 04-25-2006 at 12:39 PM.
Vcore was 1.57 in bios for my fastest run. The vcore mod made all the difference. If you have bios set to 1.50v and your trimmer set to 100kohms you will get 1.64v. You don't need to adjust the trimmer at all.Originally Posted by NapalmV5
NapalmV5 - you will be happy with a vcore mod - good luck
BTW - I have a IHS on my chip.
Now this is impressive score and clock on AIR. Damn 18's on air. If anyone would tell me this 2 monts ago it would be science fiction. Now these crazy Yonah'sOriginally Posted by runmc
Abit IC7 P4 2.8a @4.21 | P4 3.4e @4.9 | Gainward 6800GT GS @486/1386
Asus P4P800 SE Dothan 730-PM @ 2900 | EVGA 6800 Ultra GS @521/1376
e8400@4.3G & 8800GTS G92 800/1932/1132 as gaming rig 24/7
Custom self build chillbox with watercooling @-28c 24/7 | chilled wc " cpu -18c idle/-3c load
3DMark 2005 Score Dothan & 6800U
3DMark 2005 Score p4 & 6800GT
about how much better? (OC)Originally Posted by runmc
(rough B4 and after #'s?)
(guess it doesn't matter, i couldn't solder a 0 gauge wire on the side of a barn if my life depended on it. .. )
Last edited by Joe Camel; 04-25-2006 at 01:30 PM.
JoeCamel is FOLDing for... A CURE!!! 70+Ghz (please fold so i dont have to quit smoking. j/k)
6800 EX Conroe @ 4740 MHz (395 x 12) - - Dry-Ice in The Camel Pipe - - X1900 CrossFire - - @ 846/945 -- MachII cooled Slave XTX - mOUSE-pOT cooled Master - - ASUS P5W-DH -- V-Mods: MCH, V-Core, V-Dimm - - 700w "Mr Zippy" PSU - Corsair XMS 6400 CAS3 - 2x gig @ 494 MHz 4-4-3-1
GoriLLakoS - 18.547 - Core Duo T2600 ES @ 3.356 MHz - SS - Memory 258.2 but 3:4 4-4-4-7
GoriLLakoS - 18m 36s 844ms - T2600ES Core Duo - 2.16 @ 3315Mhz - SS - 3:4 - 13x255 4-4-4-7
When Mercedes brought their C111 to Talledega years ago and blew away the closed course record did it count? Yes..
That was a "factory" car and a "one of" that no one could buy and was never sold.
Records are records and that is a fact so get over it.
runmc and gorilla, those are the yonahs from fcg right?
YEap...we got step 4..
Runmc...we got the same pi time..:P:
When Mercedes brought their C111 to Talledega years ago and blew away the closed course record did it count? Yes..
That was a "factory" car and a "one of" that no one could buy and was never sold.
Records are records and that is a fact so get over it.
Step 4
2*1GB Ballistix
231*13, 20.031sec, no memset used yet.... - I'll submit picture once I hit 19.xxx sec, btw, I use stock fan
Competition ranking;
2005; Netbyte, Karise/Denmark #1 @ PiFast
2008; AOCM II, Minfeld/Germany #2 @ 01SE/AM3/8M (w. Oliver)
2009; AMD-OC, Viborg/Denmark #2 @ max freq Gigabyte TweaKING, Paris/France #4 @ 32M/01SE (w. Vanovich)
2010: Gigabyte P55, Hamburg/Germany #6 @ wprime 1024/SPI 1M (w. THC) AOCM III, Minfeld/Germany #6 @ 01SE/AM3/1M/8M (w. NeoForce)
Spectating;
2010; GOOC 2010 Many thanks to Gigabyte!
I made some single stage runs tonight @ 1.60v. I had no problems booting, my problem was I couldn't get back into the bios to set my vdimm volt higher. Well I could have but i would have had to shut down for a minute or two and I was too hyped up. Next time I'll set vdimm higher before I turn on phase. I'm almost sure I can run 270fsb maybe more.
Single stage was holding at -45c
The cpu is from FCG, so it's an early release. The board is from pccriminal via Dumo.
Last edited by runmc; 04-25-2006 at 07:54 PM.
why is clockgen on 1600 mhz clock? and not on the 3400Originally Posted by runmc
.
After I figured out to remove red jumpers
BIOS 1.03
Mushkin XP6400
Tuniq cooled
No mods
900/900+ XTX action tomorrow
What red jumpers you are talking about?
...
Originally Posted by G H Z
Nice bios 1.03? is it better then the previous one? still got 1.02 here, do i need the update?
Last edited by Rol-Co; 04-26-2006 at 02:19 AM.
32m
kiwi,
The red jumpers that limit the Aopen board to 166-199fsb only.
by Kubokubo
32m New WR!!!!
CPU: Intel Core Duo T2600 (2.16G) QKHK ES
M/B: AOpen i975Xa-YDG (Rev.00A) (BIOS: R1.03)
MEMORY : Corsair TWIN2X1024A-5400UL V1.5 512MB x2
VGA: ATi Xpert98XL 8M (PCI)
HDD: HITACHI HDS722580VLAT20 (80GB, 7200rpm, 2MB)
CPU Cooling: KURIPRO4+ DICE
PowerSupply: Zippy 600GE (600W)
OS: Windows Server 2003
KUBOKUBO'S SYSTEM
damn, will need to vmod this board to get higher clocks I guess.
nice results.
Dell XPS M1730 - X9000 @ 3400mhz-4096MB 667MHz DDR2 - M8800GTX SLI- 17"WUXGA+
EVGA E762 4Way SLI Classified - 980X @ 6Ghz Ln² 6GB Dominator - MSI 5870 Lightning
WWW.MADSHRIMPS.BE - Being Mad Doesn't Hertz You
http://www.iamxtreme.com/cpu/t2600/cpu060420_04.htm
I just did some more compare between 2.16, 2.6, 3, 3.3G benchmark and also some FX60 @ 3G score
SUPER PI 32M
LOWER IS BETTER
CPU MARK
HIGHER IS BETTER
3DMark03
HIGHER IS BETTER
3DMark05
HIGHER IS BETTER
3DMark06
HIGHER IS BETTER
Sandra CPU Arithmetic Benchmark
HIGHER IS BETTER
Sandra CPU Multi-Media Benchmark
HIGHER IS BETTER
so i think Yonah is like FX60
XD
only pi is faster but other tests shows Yonah @ 3G is only a little bit better than FX60 3G
Very nice
Nice charts Denny. With a better mb on Yonah would most likely come better results, Aopen is not an Intel BA mb.
Last edited by dogsx2; 04-26-2006 at 01:31 AM.
By Tarosa
New modPI 1.5 XS 1M WR: 16.297s @3655.1MHz (FSB 281.2MHz x 13)
congratz on this insane 1m to teamjapan - outstanding as always
| '12 IvyBridge - "ticks different"... | AwardFabrik IvyBridge round I by SoF | AwardFabrik IvyBridge round II by angoholic & stummerwinter
| '11 The SandyBridge madness... | AwardFabrik / Team LDK OC-Season 2011/2012 Opening Event
| '10 Gulftown LaunchDay OC round up @ASUS RIIE | 3DM05 2x GPU WR LIVE @Cebit 2010 @ASUS MIIIE | SandyBridge arrived @ASUS P8P67
| '09 Foxconn Avenger | E8600 | Foxconn A79A-S | Phenom II 940 BE | LaunchDay Phenom II OC round up
| '08 7.438s 1m LN2 | AMD 1m WR LN2 | 2nd AOCM | Phenom II teasing
| '07 100% E2140 | 106.5% E2160 | 100% E4500 | 103% E4400 | 5508 MHZ E6850 | 7250 MHZ P4 641 126.5% by SoF and AwardFabrik Crew all on Gigabyte DS3P c? and LN2...
| '06 3800+ X2 Manchester 0531TPEW noHS 3201MHZ c? | 3200+ Venice noHS 3279MHZ c? | Opteron 148 0536CABYE 3405MHZ c? all on Gigabyte K8NXP-SLI compressorcooled
| '05 3500+[NC], 3000+[W], 2x 3200+[W], 3500+[NC], 3200+[V] 0516GPDW
Originally Posted by saaya
Bookmarks