Got a problem with your OCZ product....?
Have a look over here
Tony AKA BigToe
Tuning PC's for speed...Run whats fast, not what you think is fast
More than 4.0vdimm
Nice, i'll give these a try!
Originally Posted by nn_step
q6600 @ 2.6
EVGA 680i
OCZ fatal1ty ddr2 800
8800gt SLI
watercooled
Thanks Tony. Full of help as always...
So you are saying the last file can be used on my DFI NF4 UT Ultra-D board? How does this fare against the other 3/29 released bios? I can't find anything on 4/06 on DFI Street or the DFI homepage. Thanks.
Silverstone Temjin TJ-09BW w/ Silverstone DA750
Asus P8P67
2600K w/ Thermalright Venomous X Black w/ Sanyo Denki San Ace 109R1212H1011
8GB G.Skill DDR-1600 7-8-7-24
Gigabyte GTX 460 1G
Modded Creative X-Fi Fatal1ty w/ Klipsch Promedia 2.1
1 X 120GB OCZ Vertex
1 X 300GB WD Velociraptor HLFS
1 X Hitachi 7K1000 1TB
Pioneer DVR-216L DVD-RW
Windows 7 Ultimate 64
^^
I just put it on my Ultra D and am doing some stability testing...
This bios is a modded 3/29 by Tony not dfi release
I'm loving the 3/29 bios, hopefully this can be even better.
Thanks
Main Rig
i7 2600k l Asus P8P67 l 2x2gb Gskill l GTS450 l Venomous X l XClio 680
Can anyone confirm if the 150 divider as well as CAS 1.5 being back in this bios since it was out in 3/29? Besides the relaxed timings for easier boot does this bios really offer anything new for Ultra-D users? It seems the main changes are only for the Expert and Venus boards with the higher vdimm and chipset voltage.
Silverstone Temjin TJ-09BW w/ Silverstone DA750
Asus P8P67
2600K w/ Thermalright Venomous X Black w/ Sanyo Denki San Ace 109R1212H1011
8GB G.Skill DDR-1600 7-8-7-24
Gigabyte GTX 460 1G
Modded Creative X-Fi Fatal1ty w/ Klipsch Promedia 2.1
1 X 120GB OCZ Vertex
1 X 300GB WD Velociraptor HLFS
1 X Hitachi 7K1000 1TB
Pioneer DVR-216L DVD-RW
Windows 7 Ultimate 64
sweet!
Nice one Tony! :thumbsup:
Core 2 Quad Q6600 @ 3GHz . DFI DK P45-T2RS Plus . XFX 9800GT 512MB . 8GB OCZ Blade PC2-9200 . WD6400AAKS AHCI .
Creative X-Fi XtremeMusic . Hanns.G 28" LCD . Thermalright U120-E . Seasonic S12 600w . Windows 7 Professional E Retail x64 .
0406 bios > DFI NF4 Ultra-D ?
Q6600 1.390v 3.8G Vid: 1.2125Thermalright Ultra-120 Extreme .DFI LanParty DK P35-T2RS. Crucial Ballistix Tracer 8500 2x1GB.. Seagate 410As Raid0 .. Sapphire HD4870 512mb & Cooling Thermalright HR-03 GT.. 19 LG 1950SQ .. Silverstone OP850 watt. Case Gigabyte Auro3D
I'm using the 3/29 and the 150 divider now with a 144 opty. 9x multi though. Havn't checked for cas 1.5.
Main Rig
i7 2600k l Asus P8P67 l 2x2gb Gskill l GTS450 l Venomous X l XClio 680
Flashed to 0406. 150 divider not in bios, runs fine when set in A64tweaker though.
I love the toe.............
Lian-Li V2000 - OCZ PowerStream 520W
DFI NF4 SLI DR EXPERT (E704-BT BIOS)
Opteron X2 175 CCBWE 0530 TPMW- Mushkin redline XP4000 2X1GB
WD Raptor SATA 74GB *2 (raid 0)
Plextor 716 SATA DVDRW - Samsung 160GB SATA
MSI 6600GT
Thermochill 120.2 - Laing D5 pump - HDPE Reservoir - Swiftech STORM
PolarFlo TT GPU block - vantec fan controller - SANACE 103CFM fans
well if it runs fine via a64tweaker then I don't think its a problematic limitation, I think it is just hidden in the bios. I hope it can be unhidden if another revision comes out.
Tony mentioned a long time back that Oskar actually had a bios for the NF4 boards that has CAS 1.5 fully working with actual performance increases over CAS 2 though nothing ever surfaced to the end user. I was really hoping one of these later bioses would have implemented that but I guess not. I hope CAS 1.5 can be unhidden too. My BH-6 worked very well with that.
Silverstone Temjin TJ-09BW w/ Silverstone DA750
Asus P8P67
2600K w/ Thermalright Venomous X Black w/ Sanyo Denki San Ace 109R1212H1011
8GB G.Skill DDR-1600 7-8-7-24
Gigabyte GTX 460 1G
Modded Creative X-Fi Fatal1ty w/ Klipsch Promedia 2.1
1 X 120GB OCZ Vertex
1 X 300GB WD Velociraptor HLFS
1 X Hitachi 7K1000 1TB
Pioneer DVR-216L DVD-RW
Windows 7 Ultimate 64
150 divider works fine on my ultra d and opty 165
the 150 divider is only missing with the opty 146's and the x10 multiplier AFAIK
i950 (3035B684)
Gigabyte EX58A-UD3R
3x4GB G.Skill PC3-12800 7-8-7-24
HIS Radeon HD 6970 2GB & Dell 3007WFP-HC
Asus Xonar DX
128GB C300, Velociraptor & Sammy F3's
Corsair AX850W
Windows 7 Ultimate x64 SP1
I need the 150 divider with my 3000+, so I hope you're right
With me Opteron 146 divider 150 is only missing while booting with the 10x multi. If i boot with 9.5 or less i can choose 150. If i do so, change multi to 10 and safe it wil boot and run 150 fine on multi 10 (just as it does when i set it in a64tweaker). If i reboot and go back into bios its set to 166 though.
Last edited by Viss; 04-08-2006 at 01:28 PM.
quick question for ya...
I have an Opteron 175... I was wondering if ALL the dividers are present and working with a 10x multi AND an 11x multi?
-Thanks
150 divider not there with 10x multiplier.
i5 750 4.20GHz @ NH-D14 | 8GB | P7P55DLE | 8800U | Indilinx SSD + Samsung F3 | HAF922 + CM750W
Past: Q6600 @ 3.60 E6400 @ 3.60 | E6300 @ 3.40 | O165 @ 2.90 | X2 4400+ @ 2.80 | X2 3800+ @ 2.70 | VE 3200+ @ 2.80 | WI 3200+ @ 2.75 | WI 3000+ no IHS @ 2.72 | TBB 1700+ @ 2.60 | XP-M 2500+ @ 2.63 | NC 2800+ @ 2.40 | AB 1.60GHz @ 2.60
I just flashed my Venus, kicks ass bios Tony!!! I'd gained about 40mhz with Opty 148, but for some reason memory bandwidth take a very small hit even with the exact same timing I was using before, though overall stability is much better than all the previous Venus bioses, me like it!
Core i7 920 D0 3844A717 4.40Ghz HT on @1.36v (LinX/Prime/3D stable), Corsair 850W, 12GB OCZ Platinum 1600, P6T Deluxe V2, EVGA GTX 285 SS, OCZ Vortex SSD 30GB x3 RAID0, HAF 932.
Water Cooling Setup: XSPC RX360, MCP355 + XSPC Res Top, Swiftech GTZ, 1/2" Tygon, Scythe S-Flex SFF21F push, 20mm yateloon D12SL-12C pull.
Opteron 148 CABNE 0528 GPMW 3.1Ghz @1.6v Prime Stable. Westy 37" LVM-37W3, DFI Venus 975, 2GB TeamX Cronus Micron, GSkill HZ, Sapphire X1900XTX, Zippy 700W, X-Fi Xtrememusic, 36GB Raptors x2 @Raid-0.
WC Setup: PA120.3 +Shroud, MCP655, STORM, MCW60, 1/2" Tygon, mini res, Yate Loon.
150 divider seems to be CPU stepping dependant, some will run it and some won't, i can tell you it is in all bios files.
Cas 1.5 is there also, check the pic
I have a feeling CPU revision is the issue maybe, if i catch Oskar I will ask him.
Remember to read the changelog i posted, it explained what bios is for what board and that i have set 2t by default, this is to make the bios file boot friendly.
VE=Venus
EX=expert
the last bios is old skool NF4
Last edited by Tony; 06-20-2008 at 01:44 PM.
Got a problem with your OCZ product....?
Have a look over here
Tony AKA BigToe
Tuning PC's for speed...Run whats fast, not what you think is fast
mad props to Tony for modding a bios in 3 days and then letting us know about it
Posting Permissions
Reply With Quote
Bookmarks