Well hope the higher vcore helps just like gorilla says. i still hate it. When running ln2 and get a bsod, you have to warm up everything
Hope its a post / vcore problem
Well hope the higher vcore helps just like gorilla says. i still hate it. When running ln2 and get a bsod, you have to warm up everything
Hope its a post / vcore problem
Last edited by Waus-mod; 04-05-2006 at 01:09 PM.
*EDITed by IFMU*
Signature Removed by XS Staff for not following XS Policies
Forum Policies
Put the torch of the propane bottle in the pot...and start firring in the upper levels if you need to warm the mobo after the bsod in order to get warm faster...
When Mercedes brought their C111 to Talledega years ago and blew away the closed course record did it count? Yes..
That was a "factory" car and a "one of" that no one could buy and was never sold.
Records are records and that is a fact so get over it.
eh, an update here for anyone in the USA...
Ingram micro still = no stock
*sigh*
They couldnt give me an ETA, it isnt even in their computer system yet.
CPU: Intel CORE 2 Duo E6550 @ 3.6GHz w/ 1.29vcore (517*7)
Motherboard:
Gigabyte P35-DQ6
Memory:
Crucial 8500's
Video:
Nvidia 8800GTX
PSU:
Zippy 700W (fan modded of course)
Originally Posted by irev210
What's the logic behind the FSB jumpers on the Aopen 975 mobo? The manual shows settings for default (which I guess is 667 MHz even though it supports 533 MHz too) using both jumpers and 800 MHz with both jumpers removed. This doesn't really correspond to the BSEL pins since you only have to connect one pin to ground to go from 667 to 800 MHz.
There are 9 combinations and only 2 documented, maybe 266 MHz is available there too. If we knew the setting for 533 MHz it would be easier to figure out. Although I'd say it's safer to do a pin mod than making undocumented jumper connections.
This is warming up .
Lets see all those 2600 ES under ln2 :P
10s pi is the next quest
Finally...Watch Newegg this weekend
Last edited by Dumo; 04-05-2006 at 03:30 PM.
Good news Dumo Good news .Finally...Watch Newegg this weekend
Waiting for the Yellow Box to kick some ass
How certain are you? Many others have reported that Ingram Micro does not even have this in their system yet, so its looking grim for people trying to buy the board in the US.Finally...Watch Newegg this weekend
AOpen gave me an April 10 date for Newegg about a week ago....but again I do not know how accurate that is.
'Gaming' AMD FX-6300 @ 4.5GHz | Asus M5A97 | 16GB DDR3 2133MHz | GTX760 2GB + Antec Kuhler620 mod | Crucial m4 64GB + WD Blue 2x1TB Str
'HTPC' AMD A8-3820 @ 3.5GHz | Biostar TA75A+ | 4GB DDR3 | Momentus XT 500GB | Radeon 7950 3GB
'Twitch' AMD 720BE @ 3.5GHz | Gigabyte GA-78LMT-S2P | 4GB DDR3 | Avermedia Game Broadcaster
Desktop Audio: Optical Out > Matrix mini DAC > Virtue Audio ONE.2 > Tannoy Reveal Monitors + Energy Encore 8 Sub
HTPC: Optoma HD131XE Projector + Yamaha RX-V463 + 3.2 Speaker Setup
It goes straight to NE.....Probly bypassed Ingrams and such for the 1st batch (10 to 20pcs. max).
oh maaaaaaaaaan cold bug....that's a dirty word
coolaler's new record/
3420mhz pi 1m / 17.9s
3420mhz 32m/16"37'
cooler/coolexpress compressor
http://forum.coolaler.com/showthread...7&page=2&pp=40
good
now where my board ;@)
wow
W.R.?
vdimm mod #15fb?
vcore
fsb266 pinmod
impressive
now we wait for the olympic answer by greeks
Last edited by mine; 04-05-2006 at 11:13 PM.
yeah just looked up some list with a monster 15m run.....but something tells me that will go down VERY soon with meroms/conroes circling around
No, those 7300 Mhz Netbursts still have a gap of less than a second... only temporary, of course
And a 3.4 Ghz Yonah gets similar Superpi 1M performance to 4 Ghz Dothan
Hicookie, doing the 266fsb pinmod, we'd get the T2600 starting with 266x13 mhz?
away & gone
What temps does he get with cooler/coolexpress compressor? Is that SS?
...
-48 c
ddr2 measurepoint
what are we talking here
evap? core? load? idle?
idle...evap's temp
he didn't notice full load's temp...
cool
is he cold bugging past that or just being held back by motherboard here?
my single compressor unit is just a tad cooler so just about right for these heh.....i really don't like the sound of cold bugs with Intel mobos... i really hope there will be better builds to avoid that
ha-ha, if the motherboard can support -50C and lower, I smell 3600+ mhz on dry ice and a Mousepot
away & gone
Just a little more than 3.6G and a tad colder will be perfect
Less load on evap. for sure
@hicookie...what happened with mod pics?
Last edited by Dumo; 04-06-2006 at 12:32 AM.
Posting Permissions
Reply With Quote
Bookmarks