MMM
Page 1 of 6 1234 ... LastLast
Results 1 to 25 of 127

Thread: 7900gtx oc's ONLY

  1. #1
    Xtreme 3DTeam Member
    Join Date
    Aug 2005
    Posts
    636

    7900gtx oc's ONLY

    I know there is a thread for listing 7900gtx/7900gt oc's but for some reason hardly anyone posted anything about the gtx's and rather everyone is posting about the 7900gt's and its respective vmods.

    I am looking into upgrading (if possible) and was trying to decide what brand is best and if its worth it to buy and pre-oc'ed card.

    So please list the following for your 7900gtx:

    Brand:
    Cooling:
    Overclock:
    Core/Mem Voltage:

    And list and 3mark scores if you want. Your help is much appreciated
    New Build Under Way...

    Server:
    X2 3800+ 0601 UPMW 2.95ghz w/ 1.48v cooled by zalman 7700 Cu
    EVGA 7900gt CO Superclocked (725/875) cooled by modded AMD64 hsf
    DFI NF4 Ultra-D
    2 x 512mb TeamGroup pc4000 UTT BH-5
    OCZ 520W Powerstream

  2. #2
    Registered User
    Join Date
    Nov 2004
    Posts
    90
    Seems like no one here owns a GTX, which is odd, because this is xtremesystems.org.

    Anyway, may I suggest we break it down like this, and add some definitions.


    Brand: XFX 7900 GTX Extreme (675/850)
    Cooling: Stock
    Core Overclock: 720
    Mem Overclock: 845
    Core/Mem Voltage:Stock

    Artifact Free?: These clocks are my max artifact free overclocks in battlefield 2. Unfortuantly for battlefield 2 not to artifact I had to lower the memory speed below what XFX rated it at. Memory runs 875 in most other games no problem it seems.

    One thing I did notice, and this maybe only true with XFX, but from the factory there was a gap between some memory modules, and the cooling.

    So some memory chips were seriously overheating probably due to the static air pocket above them. The 7900 GT is passively cool, but there no no insulatation over the chip either (ie static air).

    I took off the stock HSF, and applied AS 5, then tightened the heatsink down all the way to make better contact. There was still some gap, but better, and the memory made it to 845, instead of 830 or so before.

    I thought the Samsung BJ11 was rated at 900 mhz? The timings on the XFX bios too tight?
    DFI Lanparty UT nf4 SLI-D
    AMD Opteron 170 @ 2950 IHS Removed
    2x OCZ Plat Elite PC 4800 DDR 600
    XFX 7900 GTX Extreme
    WD Raptor- SATA
    WD 160GB IDE
    Generic CD-RW IDE
    OCZ Power Stream 520
    Water Cooling

  3. #3
    Xtreme Enthusiast
    Join Date
    Oct 2003
    Location
    Terra
    Posts
    578
    Brand: point of view
    Cooling: Stock
    Overclock: 728/938
    Core/Mem Voltage: stock

    No serious benches done , waiting for wc cooling and vmod.
    CPU : Intel Core 2 Extreme QX9650
    MB : Asus P5E X38 Rampage bios
    RAM : Team Xtreem 4x1GB DDR2 OPB handpicked
    VGA : Sapphire 4870
    Power : Antec Quattro 850w
    Storage : 1 x 60GB OCZ Vertex + 2 x 750gb WD 32Mb
    DVD : Samsungs DVDwriter Sata + Liteon DVD
    Sound : Creative XFI Xtrememusic
    Cooling : D-Tek Fusion + D-Tek Fusion GFX
    Monitor : Samsung 226BW
    Errorcode : An error occurred at address AC 20 DE AE FF BC ...... System halted.



  4. #4
    Xtreme Member
    Join Date
    Jun 2005
    Location
    Dulles, VA
    Posts
    132
    Brand: eVGA 7900GTX 570
    Cooling: Stock
    Overclock: 720/865, 718/870
    Core/Mem Voltage: stock

    Ran some benches with SLI. Waiting on a 170 0550 UPMW that should be here today and clock better than my current 170 that only does 2.7.
    Also have some waterblocks waiting for the cards, so hopefully score go up.
    http://service.futuremark.com/compare?3dm05=1915833
    http://service.futuremark.com/compare?3dm06=215769
    2600K @ 4.8 w/H70
    ASUS Sabertooth P67
    16GB G.Skill DDR3 1600
    ATI 5870 2GB
    Thermaltake 750w
    OCZ Vertex 2 120GB
    2x2TB WD Greens
    Thermaltake Level 10GT

  5. #5
    Xtreme Addict
    Join Date
    Nov 2003
    Location
    Oslo, Norway
    Posts
    1,218
    Brand: POV
    Cooling: Mach II R404a
    Overclock: 900/990
    Core/Mem Voltage: 1.81vgpu, no mem mod..

  6. #6
    Xtreme Member
    Join Date
    Feb 2005
    Location
    Minnesota, USA
    Posts
    302
    Brand:EVGA regular 7900 GTX
    Cooling: Innovatek G70
    Overclock: 729/890 on water, 720/875 on air
    Core/Mem Voltage: Stock

    05 12373

    06 6908
    QX6700 @ 4.0 Ghz - EVGA 680i - 4 GB DDR2-1066 (4-4-4-10) - 8800 GTX SLI - 2 x 150 GB RaptorX RAID 0 - Seagate 500 GB - DVD-RW-DL - Realpower Pro 1000W - Vapochill LS - Dell 3007

    Q6600 G0 @ 3.6 GHz - EVGA 680i - 2 GB DDR2-1000 - 8800 GTX - Seagate 500 GB - DVD-RW-DL - Enermax 1000W - Swiftech Loop - Dell 3007

    E6850 G0 @ 3.6 GHz - EVGA 680i - 2 GB DDR2-800 - 8600 GTS - Seagate 250 GB - DVD-RW-DL - 700 W - ThermalRight SI 128 - Dell 2007

  7. #7
    Xtreme Member
    Join Date
    Dec 2005
    Posts
    316
    Quote Originally Posted by Indyxc
    Seems like no one here owns a GTX, which is odd, because this is xtremesystems.org.

    Anyway, may I suggest we break it down like this, and add some definitions.


    Brand: XFX 7900 GTX Extreme (675/850)
    Cooling: Stock
    Core Overclock: 720
    Mem Overclock: 845
    Core/Mem Voltage:Stock

    Artifact Free?: These clocks are my max artifact free overclocks in battlefield 2. Unfortuantly for battlefield 2 not to artifact I had to lower the memory speed below what XFX rated it at. Memory runs 875 in most other games no problem it seems.

    One thing I did notice, and this maybe only true with XFX, but from the factory there was a gap between some memory modules, and the cooling.

    So some memory chips were seriously overheating probably due to the static air pocket above them. The 7900 GT is passively cool, but there no no insulatation over the chip either (ie static air).

    I took off the stock HSF, and applied AS 5, then tightened the heatsink down all the way to make better contact. There was still some gap, but better, and the memory made it to 845, instead of 830 or so before.

    I thought the Samsung BJ11 was rated at 900 mhz? The timings on the XFX bios too tight?
    did you put AS5 on the memmory modules and the core or just the core?

    I have the same card as you seems I can even get near 700, 695 is the max at the moment tommorow I'll try ocing further what is your pci express frequency?

  8. #8
    Registered User
    Join Date
    Nov 2004
    Posts
    90
    Quote Originally Posted by rapty
    did you put AS5 on the memmory modules and the core or just the core?

    I have the same card as you seems I can even get near 700, 695 is the max at the moment tommorow I'll try ocing further what is your pci express frequency?

    Just the core. It helped lower the temp a bit, but the day I did it, the next day it was like 70 F outside, so it was hard to tell a difference.

    You can't really put it on the memory chips, because the gap appears to be wide between the heatsink and chips. Even with the thermal tape, some chips have gaps, even after I tightened it down all the way. To me, from the factory that is simply unacceptable.

    PCI express frequency is at 100.
    Last edited by Indyxc; 04-01-2006 at 11:00 AM.
    DFI Lanparty UT nf4 SLI-D
    AMD Opteron 170 @ 2950 IHS Removed
    2x OCZ Plat Elite PC 4800 DDR 600
    XFX 7900 GTX Extreme
    WD Raptor- SATA
    WD 160GB IDE
    Generic CD-RW IDE
    OCZ Power Stream 520
    Water Cooling

  9. #9
    Xtreme 3DTeam Member
    Join Date
    Aug 2005
    Posts
    636
    Have you guys tried increasing Pci-express frequency to improve overclocks?
    New Build Under Way...

    Server:
    X2 3800+ 0601 UPMW 2.95ghz w/ 1.48v cooled by zalman 7700 Cu
    EVGA 7900gt CO Superclocked (725/875) cooled by modded AMD64 hsf
    DFI NF4 Ultra-D
    2 x 512mb TeamGroup pc4000 UTT BH-5
    OCZ 520W Powerstream

  10. #10
    Xtreme Addict
    Join Date
    Sep 2005
    Location
    Las Vegas, NV
    Posts
    1,771
    Quote Originally Posted by Indyxc
    Just the core. It helped lower the temp a bit, but the day I did it, the next day it was like 70 F outside, so it was hard to tell a difference.

    You can't really put it on the memory chips, because the gap appears to be wide between the heatsink and chips. Even with the thermal tape, some chips have gaps, even after I tightened it down all the way. To me, from the factory that is simply unacceptable.

    PCI express frequency is at 100.
    Did you happen to take off the white pads from the memory moduals?

    I took mine off, and noticed that my heat sink does not touch the memory moduals without those pads.... check it out.

    ~Mike
    Main Rig: Intel Core i7 7700k @ 4.2GHz, 64GB of memory, 512GB m.2 SSD, nVidia GTX1080Ti
    NAS: QNAP TVS-1282, 8 x 4TB WD Golds(Main Storage Pool), 4 x 960GB M4 Crucial (VM Storage) , 2 x 512GB M.2 Caching
    Private Cloud: 4 Nodes (2 x Xeon 5645, 48GB DDR3 ECC/REG, 1 x 1TB HDD, 1 x 960GB SSD/Each)
    Distributed Encoding Cloud: 4 Nodes (2 x Xeon x5690, 24GB DDR3 ECC/REG, 1 x 128GB SSD/Each)
    Feedback
    EBAY:HEAT

  11. #11
    Xtreme Enthusiast
    Join Date
    Oct 2003
    Location
    Terra
    Posts
    578
    Quote Originally Posted by madgravity34
    Have you guys tried increasing Pci-express frequency to improve overclocks?
    Tried up to 112 , oc stays the same ( back @ 101 now )

    Edit : Hmm just read that kingpin says that 118 -125 max works ( 112 may be to low )
    Last edited by Cranox; 04-01-2006 at 08:22 PM.
    CPU : Intel Core 2 Extreme QX9650
    MB : Asus P5E X38 Rampage bios
    RAM : Team Xtreem 4x1GB DDR2 OPB handpicked
    VGA : Sapphire 4870
    Power : Antec Quattro 850w
    Storage : 1 x 60GB OCZ Vertex + 2 x 750gb WD 32Mb
    DVD : Samsungs DVDwriter Sata + Liteon DVD
    Sound : Creative XFI Xtrememusic
    Cooling : D-Tek Fusion + D-Tek Fusion GFX
    Monitor : Samsung 226BW
    Errorcode : An error occurred at address AC 20 DE AE FF BC ...... System halted.



  12. #12
    Xtreme Member
    Join Date
    Feb 2005
    Location
    Minnesota, USA
    Posts
    302
    I use 107 for 24/7 settings. I have had it as high as 115 when benching. Seems to help things a bit. I guess I will have to try the 125 setting to see what effect it has.
    QX6700 @ 4.0 Ghz - EVGA 680i - 4 GB DDR2-1066 (4-4-4-10) - 8800 GTX SLI - 2 x 150 GB RaptorX RAID 0 - Seagate 500 GB - DVD-RW-DL - Realpower Pro 1000W - Vapochill LS - Dell 3007

    Q6600 G0 @ 3.6 GHz - EVGA 680i - 2 GB DDR2-1000 - 8800 GTX - Seagate 500 GB - DVD-RW-DL - Enermax 1000W - Swiftech Loop - Dell 3007

    E6850 G0 @ 3.6 GHz - EVGA 680i - 2 GB DDR2-800 - 8600 GTS - Seagate 250 GB - DVD-RW-DL - 700 W - ThermalRight SI 128 - Dell 2007

  13. #13
    Registered User
    Join Date
    Nov 2005
    Posts
    38
    Is anyone volt modding for these.

    If so, is there a guide for voltmodding the GTXs?

    I've seen PLENTY of information for the GT, but nothing for the GTX

    EDIT: after reviewing the results, I guess my question is more geared towards dpa.
    Last edited by hartigan; 04-02-2006 at 02:31 PM.

  14. #14
    Xtreme Addict
    Join Date
    Dec 2004
    Location
    The Holy Land
    Posts
    1,205
    first try on that card, will do better, but that is for now:

    Brand: MSI 7900GTX 512
    Cooling: Stock
    Overclock: 700/850
    Core/Mem Voltage: stock
    Last edited by cupra; 04-02-2006 at 02:36 PM.
    Asus P5-E X38 Intel QX9650 INOO3D 9800 Gx2 4x Super Talent's T800UX2GC4
    Creative X-Fi Raid 0 Raptors 36Gb data 1Tb Seasonic M12 700w
    Dell 2407WFP Lian-Li Pc-65 mod Custom Built Phase Change Unit |Logitech G25|

    RIG#2: DFI LANPARTY LT X48-T2R|Q9550| INOO3D 9800GTX|
    2xCellshok 1000| PC Power and cooling 750w Thermaltake v1
    Wife: DFI LANPARTY UT P35-T2R|Q930|BFG 8800GTS 512MB|
    Samsung ddrII 667| PC Power and cooling 610eps12v Thermaltake v1

    Htpc:Dfi Sli-Dr Venus|3700+|2x1gb Team Group ddr500|Thermaltake Mozart TX


  15. #15
    Xtreme 3DTeam Member
    Join Date
    Aug 2005
    Posts
    636
    Thanks for the info guys. Essentially it doesnt matter what I get because they all seem to oc around the same.
    New Build Under Way...

    Server:
    X2 3800+ 0601 UPMW 2.95ghz w/ 1.48v cooled by zalman 7700 Cu
    EVGA 7900gt CO Superclocked (725/875) cooled by modded AMD64 hsf
    DFI NF4 Ultra-D
    2 x 512mb TeamGroup pc4000 UTT BH-5
    OCZ 520W Powerstream

  16. #16
    Xtreme Member
    Join Date
    Jun 2005
    Location
    Istanbul - Turkey
    Posts
    186
    Brand : PNY 7900 GTX
    Cooling : Stock
    Overclock : 720/870
    Voltage : No Vmod
    Asus Rampage II Extreme - Intel Core i7 920 - 3x2 GB Corsair Dominator 1600MHz -1792MB Zotac GTX 295 - 500 GB Seagate 7200.12 - 1 TB Seagate 7200.11 - 500 GB WD Hdd - 16x Nec Sata DVD-RW - 26" Samsung T260 - Logitech Pro Keyboard - G5 Mouse - Razermat Control Pad - Lian-Li V2000 Case - Tagan 700Watt BZ Psu - Logitech Z5500 Speakers

  17. #17
    Xtreme Member
    Join Date
    Apr 2005
    Location
    Norway
    Posts
    133
    Club3D 7900 GTX

    GPU 650 MHz
    Memory 1600 MHz

    OC (stable 24/7)
    696
    840 (1680)

    Cooling -> stock
    RIG 1:[Intel® Core i7-3960X Extreme][Asus Rampage IV Extreme][16GB G.Skill RipjawsZ ][AMD HD 7970 CF][Corsair AX 1200W][Corsair Obsidian 800D][Custom Watercooling][Dell U2711)
    RIG 2:[Intel® Core i7-990X Extreme @4.6Ghz][Evga X58 Classified 760][12Gb Muskin Redline][EVGA GTX 580SLI][TT TP1200W][Lian Li V2000BPLUSII] [Custom Watercooling][Dell U2711]
    RIG 3:[Intel® Core i7-2600K@4.4Ghz][ASUS P8H67 B3][8 GB Corsair Vengeance] [Evga GTX 570SLI][Corsair AX 850W][Lian Li V2000BPLUSII][Corsair H70][Custom Watercooling][Dell 2407wfp]
    RIG 4:[Intel® Core 2 QX9650 Extreme @4.0Ghz][ASUS P5E3 PRO INTEL X48 ][8GB Muskin Redline][MSI GTX 470][Corsair AX 850W][Lian Li V2000BPLUSII][Custom Watercooling][Dell 2407wfp]

  18. #18
    Xtreme Family
    Join Date
    Dec 2004
    Location
    Republic of Hiroshima
    Posts
    2,640
    Brand : Leadtek Extreme
    Cooling : Stock
    Overclock :730/1965(675/1660)
    Voltage : No Vmod
    Mojo
    Family
    Biostar TP55 XE - Core i7 860(ES) @ 4.2ghz - CNPS10X Extreme - G.SKILL 1600 - Galaxy GTX275 - Velociraptor 300GB x 2 - Zippy TypeR 600w
    Criminal
    Biostar Tpower X58A - 920~Gulf - G.SKILL2000CL8 - GTX580 - Intel 520 120GB - Antec HCP 1200w
    Biostar TP67XE/TZ77XE4 2500k~3770K - G.SKILL 2800 - GTX480 - OCZ Vertex2 50GB - Corsair AX1200
    Biostar Tpower X79 i7 3820 ~ E5 2680 - G.SKILL 2400C11 - GTX560Ti - Intel 520 120GB - AX1200i
    Kids
    P4GD1 - Pentium M 780 - XMS Xpert400 - GTX460 - Raptor 36GB - Aopen 560w



  19. #19
    Xtreme Member
    Join Date
    Apr 2005
    Location
    Birmingham, UK
    Posts
    468
    Point Of View 7900GTX SLI

    On Stock Air No Mods:

    725/900

    Volt modded water cooled:

    756/940

    PCI-Express set at 110 24/7 - benching at 115Mhz

    These babies suck at overclocking!!
    Last edited by maverik-sg1; 04-03-2006 at 07:33 AM.

  20. #20
    Xtreme Member
    Join Date
    Apr 2005
    Location
    Birmingham, UK
    Posts
    468
    Quote Originally Posted by PcCI2iminal
    Brand : Leadtek Extreme
    Cooling : Stock
    Overclock :730/1965(675/1660)
    Voltage : No Vmod

    Man your memory rocks at those clocks - might try using the leadtek BIOS

  21. #21
    Banned
    Join Date
    Jun 2003
    Location
    Broomfield, CO
    Posts
    3,882
    Anyone care to post a rip of the Leadtek 7900GTX BIOS?

  22. #22
    Registered User
    Join Date
    Dec 2005
    Location
    Canada
    Posts
    45
    you can grab the regular leadtek 7900gtx bios here... i dont see the extreme edition....
    http://www.mvktech.net/component/opt...rent,category/

    EDIT: nevermind there is only one leadtek 7900gtx and its that one.... so try it out and post some results...
    Last edited by baracus2k; 04-03-2006 at 03:36 PM.
    Intel Core 2 Quad Q6600 G0 @ 3.6GHZ
    Asus P5B Deluxe
    4GB OCZ Platinum PC8000 EL
    BFG GTX 280 OC2 1GB @ 729/1512/2538
    Dell 2405FPW 24"

  23. #23
    Banned
    Join Date
    Jun 2003
    Location
    Broomfield, CO
    Posts
    3,882
    link is broken, i sent an email to the site owner. hopefully he will fix it.

  24. #24
    Registered User
    Join Date
    Dec 2005
    Location
    Canada
    Posts
    45
    Intel Core 2 Quad Q6600 G0 @ 3.6GHZ
    Asus P5B Deluxe
    4GB OCZ Platinum PC8000 EL
    BFG GTX 280 OC2 1GB @ 729/1512/2538
    Dell 2405FPW 24"

  25. #25
    Registered User
    Join Date
    Nov 2004
    Posts
    90
    What volt mod are you guys using? The one used on the 7800 GTX?

    Reason I ask is the new 7900 GT for 1.4v seems really easy where you just have to connect to pins on that one chip.

    Is there anything similiar for the 7900 GTX?
    DFI Lanparty UT nf4 SLI-D
    AMD Opteron 170 @ 2950 IHS Removed
    2x OCZ Plat Elite PC 4800 DDR 600
    XFX 7900 GTX Extreme
    WD Raptor- SATA
    WD 160GB IDE
    Generic CD-RW IDE
    OCZ Power Stream 520
    Water Cooling

Page 1 of 6 1234 ... LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •