Even after doing the single side mode it won't fit. The heatpipes that come off the back of the cooler come out so far that they hit the bracket. I don't think there's any way to further mod the bracket so that it would fit with that heatsink.
Even after doing the single side mode it won't fit. The heatpipes that come off the back of the cooler come out so far that they hit the bracket. I don't think there's any way to further mod the bracket so that it would fit with that heatsink.
on DFI SLI DR my heatpipes face my videocard ..different layout vs Expert mobo
My Heat
i5 2500k @4.5ghz Raystorm
Asus P8Z68-V Pro/Gen3 16gb(4x4) G.Skill PC12800 Ripjaws X
x1900xt MCW60
Rad: Thermochill PA120.3 3YL SL/ Pump: DDC2 w/ Petra's top 7/16in ID masterkleer
Corsair 120gb Force GT SSD/ 1TB WD Black Caviar SATA
X-Fi music/SH-203B/H62L/LH-20A1L
Corsair HX620w /Acer AL2223W/modded TJ07
It may possibly fit with low-profile 50mm fans or even just by leaving the 50mm fan holes empty.... You could definately just lop off the RAM cooling side as the 40mm fans are supported w/ ease by the two side standoffs.
I completely forgot that the heatpipes are up / down on the SLI-DR opposed to left / right on the Expert.
I definately think you could make it work one way or another!
Any updates on the Ultra-D/SLI-D(R) bracket?
Still putting some final touches on it.
But admittedly I haven't had much chance to work on it lately as I've been working some OT at work.
In a few weeks I should be ready to go with the production model of it. Thx for staying with it while I get it worked out
Cool. Can't wait to see the final product
I guess the site is down? I finally get around to ordering one and the site goes down. Any clue on how long until it will be back up. One other question...Do you ship to FPO addresses?This domain is parked, pending renewal, or has expired.
Please contact the domain provider with questions.
DFI NF4 SLI-DR Expert Venus #s 909, 917, 924 w/ FragTek Sysxtreme Mosfet/Ram Cooling Bracket
Opteron170 CCBWE 0550 UPMW Testing
2GB G.SKILL DDR500 @3-4-7-3 1T
7900GTX SLI (650/1600)
PC POWER AND COOLING 1KW
2x74gb Raptor Raid 0
2xSeagate 7200.9 300gb
NEC 3550A x2
Heat:twisted5
Sorry mate my freakin hosting expired right under my nose and didnt even realize it... I've now paid the bill and just waiting for it to come back up.Originally Posted by twisted5
I'll post here when it's back up, sorry for the delay!
WWW.FRAGTEK.COM IS BACK UP!
You may resume placing orders as usual, thanks!!!
Would the full bracket have clearance for my STORM waterblock and how loud are those fans anyways?
the fans are moderately loud but nothing like say a tornado, etc.
the full bracket is compatible with all waterblocks, thanks for your interest!
Just ordered one a few minutes ago. Great idea - can't wait to get it!
i7 920 D0 (bone stock)
Asus P6T Deluxe V2
6GB OCZ Gold DDR3 1600
Antec Quattro 850
FSP Booster X5
Crossfire HIS 4890s
X-Fi Gamer
500GB Seagate SATA 32MB Cache
Windows 7 64 Bit
Watercooled HAF932
It'll go out tomorrow, thanks!!!
Bump in the night....
I want to give a big shout out to everyone who ordered brackets last night, it was a good night topping out at 6 brackets, 3 of which were fully loaded and 3 were bracket only.
Keep those orders coming, word must be getting around that these brackets are piiiimp :p hehe
www.fragtek.com to place your order
Just received mine - and it's excellent. Will be sleeving the fan wires this coming week. Bracket fits perfectly with two XFX 7800 GTXs & an Apogee WB. Beefy little fan, too. Good stuff going on here.
i7 920 D0 (bone stock)
Asus P6T Deluxe V2
6GB OCZ Gold DDR3 1600
Antec Quattro 850
FSP Booster X5
Crossfire HIS 4890s
X-Fi Gamer
500GB Seagate SATA 32MB Cache
Windows 7 64 Bit
Watercooled HAF932
I'll tell my friend about this. He'll probably order 3 complete sets.
Soooooo, the obvious choise hasn't been spoken. I will though.
Why don't you use two radial fans? Cheaper, less noise, better looking and above all they pump a LOT more.
Opteron 165
Dfi NF4 Expert
4x1 1GB twinmos PC 3200
XFX 7900GT 550/1500
Got a link for such an animal?
So does it fit with the Big Typhoon yet???
PC Lab Qmicra V2 Case SFFi7 950 4.4GHz 200 x 22 1.36 volts
Cooled by Swiftech GTZ - CPX-Pro - MCR420+MCR320+MCR220 | Completely Silent loads at 62c
GTX 470 EVGA SuperClocked Plain stock
12 Gigs OCZ Reaper DDR3 1600MHz) 8-8-8-24
ASUS Rampage Gene II |Four OCZ Vertex 2 in RAID-0(60Gig x 4) | WD 2000Gig Storage
Theater ::: Panasonic G20 50" Plasma | Onkyo SC5508 Processor | Emotiva XPA-5 and XPA-2 | CSi A6 Center| 2 x Polk RTi A9 Front Towers| 2 x Klipsch RW-12d
Lian-LI HTPC | Panasonic Blu Ray 655k| APC AV J10BLK Conditioner |
Hey Crankster. What fans are you talking about?
Still waiting on the verdict for the BT.
I'm moving in to my newly acquired house which I must say is off the hook and won't have a lot of R&D time for the next bit....
Currently I'll only be working on getting orders out for the current brackets. Sorry to anyone patiently waiting for new designs, etc. But time is something I just dont have right now.
I'M READY FOR THE SLI-DR BRACKET!!!
en4cer's system!
DFI LANPARTY DK 790FX-M2RS
AMD Phenom 9850 BE @ 3.4Ghz 1.35v
4GB Corsair Dominator @ 1066MHz 5-5-5 2.2v
Visiontek ATI Radeon HD4870
Creative X-Fi Xtreme Gamer
2x Western Digital 320GB SATA-II
Lian-Li PC-A17B Case
Corsair 750TX 750W Power Supply
Klipsch Promedia Ultra 5.1 Speakers
Windows Vista Ultimate x64
HEAT
oh yeah and the ULTRA-D BRACKET also
Intel E6600 (L630F)
Gigabyte P35-DS3P
2 x 1gb Crucial Ballistix 1066
ASUS EN7800GTX
2 x 250gb WD 2500KS in RAID-0
OCZ Powerstream SLi 520
CM Centurion 5
Those would be the same bracket fellaz, hehe....
I just moved and things are going to be rough for a while but I will TRY and get some work done with the new brackets, no promises though.
cool, i'd definately get one for my sli-d!
Posting Permissions
Reply With Quote
Bookmarks