XS Yonah T2600ES competition !!!

**Dumo** · 03-25-2006, 10:36 AM

Originally Posted by kyosen

I start playing with MSI 945GT Speedster Plus

Start....Here we go

Nice initial run there kyosen

**stummerwinter** · 03-25-2006, 10:39 AM

Nice start koycen...

**Dumo** · 03-25-2006, 11:01 AM

Dxxmn

...22.5 sec. with 2.7Gig

**M.Beier** · 03-25-2006, 11:19 AM

A start, but... I'd really like to see the i975X's in action

**NiCKE^** · 03-25-2006, 11:35 AM

Weei I wanna see a 3.5ghz pi round or something

**Sucka** · 03-25-2006, 11:44 AM

Originally Posted by kyosen

ClockGen-1.0.4.2 is available, but unfortunately, there is FSB limitation
around 210MHz...owe to PLL(ICS954129) specification, I wonder.

You're able to get Clockgen to work with Yonah? I wanted to o/c my lappy (this is XS

) and i can't get :banana::banana::banana::banana:gen to work at all, details please.

**Dumo** · 03-25-2006, 11:45 AM

Originally Posted by Sucka

You're able to get Clockgen to work with Yonah? I wanted to o/c my lappy (this is XS

) and i can't get :banana::banana::banana::banana:gen to work at all, details please.

Welcome back Sucka

...Ready for a different water?

**Sucka** · 03-25-2006, 11:47 AM

Originally Posted by Dumo

Welcome back Sucka

Thanks Dumo

I haven't had a PC work in months so i just took a break, couldn't afford anything

Got a new Yonah lappy and i'm just dieing to overclock it

**Gautam** · 03-25-2006, 11:50 AM

Awesome work already kyosen! Way to squeeze that i945, hehe...very odd memory divider there.

Sucka, glad to see you're still alive.

**EZClock** · 03-25-2006, 11:56 AM

Kysosen, excellent work.

On a side note, Nice to see you back Sucka.

**oktavius** · 03-25-2006, 12:12 PM

good work kyosen

how much vcore were nessecary?

**mrlobber** · 03-25-2006, 12:14 PM

Originally Posted by oktavius

how much vcore were nessecary?

a-ha, that's what I'd like to know as well

Kinda would be the first indicator of what to expect later.

kyosen, great job for bringing us the first results

**hipro5** · 03-25-2006, 12:16 PM

Originally Posted by kiwi

Yay for Asus crap board

What, are you gonna glue heatsink to your chip, no mounting holes

**Chr0n1c** · 03-25-2006, 12:19 PM

Kyosen, do you have any 3D to share with us?

aqumark3 and 2k1 stock x1900/7900gtx singlecard?

**kiwi** · 03-25-2006, 12:28 PM

What PCI freq you have at 213fsb? 35.5 or 42.6?

Originally Posted by oktavius

good work kyosen

how much vcore were nessecary?

1.3V +/- 0.05V if cpuz is not lying.

**ibby** · 03-25-2006, 12:29 PM

Originally Posted by kiwi

Sure it's not, did you see that I used word crap

nope

**M.Beier** · 03-25-2006, 12:33 PM

I think its stock volts... What I would like to know is... What cpu cooler, active or passive?

**WeedJunk** · 03-25-2006, 12:42 PM

Originally Posted by M.Beier

I think its stock volts... What I would like to know is... What cpu cooler, active or passive?

He said he did a Vcore mod, so I guess that wouldn't be the stockvoltage

**oktavius** · 03-25-2006, 01:24 PM

Originally Posted by kiwi

What PCI freq you have at 213fsb? 35.5 or 42.6?

1.3V +/- 0.05V if cpuz is not lying.

well i don't trust CPU-Z

he has measure points for vcore, so he can say it us .. plz

**dinos22** · 03-25-2006, 01:50 PM

Originally Posted by Razor_Sniper

No dual channel?

how do you know that?

**Razor_Sniper** · 03-25-2006, 02:54 PM

Originally Posted by dinos22

how do you know that?

It was a question... But it do has dual channel

**dinos22** · 03-25-2006, 03:00 PM

i'm not sure but i thought 945GT and 975X will both give dual channel for these CPUs

**kyosen** · 03-25-2006, 03:11 PM

Good morning!...in Japan

I must answer to several questions...

> You're able to get Clockgen to work with Yonah? I wanted to o/c
> my lappy (this is XS ) and i can't get :banana::banana::banana::banana:gen to work at all, details please.
--
At least, we should know what PLL chip is used for our motherboards...
In my case, in this time, MSI's 945GT-SP has a ICS954129 PLL chip.
ClockGen-1.0.4.2 has a setting for ICS954123, and once we select it,
it's also enough for ICS954129, though PCIe&PCI clock can't be displayed
properly...so I checked in "Ignore GSB/PCI" check box...by Franck's advice

<img src="http://222.151.185.113/c-board/file/CG-1.0.4.2_on_ICS954129.png">

>>> how much vcore were nessecary?
--
>> 1.3V +/- 0.05V if cpuz is not lying.
--
> well i don't trust CPU-Z
--
Vcore is about 1.3V.
...Trust CPU-Z, at least in this case, please

Originally, Vcore was slightly low, 1.25V.
It's enough for SuperPI 1M running at 2.7G, but not for 8M running.
so I add just +0.05V...still within default Vcore spec range

>> No dual channel?
--
> It was a question... But it do has dual channel
--
Yeah, it's dual channel running.
I regulate amount of memory for RAM disk setting, by /MAXMEM=600.

> What PCI freq you have at 213fsb? 35.5 or 42.6?
--
I've not yet checked it, but I think that PCI clock is fixed at 33.3MHz...
I'll check it later by PC Geiger/RD2 PCI Bus Analyzer.

> What cpu cooler, active or passive?
--
Water cooling.

> Kyosen, do you have any 3D to share with us?
> aqumark3 and 2k1 stock x1900/7900gtx singlecard?
--
I have both VGA boards, X1909XTX and 7900GTX.
Stay tuned

More details and screenshot will be uploaded to my BBS:
http://www.oohashi.jp/c-board/c-boar...ne;no=4278;id=
...sorry in Japanese.

**dinos22** · 03-25-2006, 03:14 PM

Originally Posted by kyosen

>> No dual channel?
--
> It was a question... But it do has dual channel
--
Yeah, it's dual channel running.
I regulate amount of memory for RAM disk setting, by /MAXMEM=600.

thanks for the update

pls tell us more about this if you can

**Athens[2004]** · 03-25-2006, 03:46 PM

Very niCe result kyosen , on a very new [and unsopported also] platform . Those mhz/perf ratio is outstanding.

Thread: XS Yonah T2600ES competition !!!

Thread Tools

Search Thread

Rate This Thread

Display

Bookmarks

Bookmarks

Posting Permissions