Results 1 to 25 of 514

Thread: 7900GT over voltage protection?

Hybrid View

  1. 03-23-2006, 02:04 PM #1
    ***Deimos***
    ***Deimos*** is offline
    Xtreme Addict
    Join Date
    Jan 2004
    Posts
    1,313
    Quote Originally Posted by TimeOut
    Can we do the pencil trick between pin 21 and 22?

    This should set 1.4V VGPU right away.
    I think this would work.
    But, getting pencil in there is just as difficult as soldering.

    24/7: A64 3000+ (\_/) @2.4Ghz, 1.4V
    1 GB OCZ Gold (='.'=) 240 2-2-2-5
    Giga-byte NF3 (")_(") K8NSC-939
    XFX 6800 16/6 NV5 @420/936, 1.33V
    Reply With Quote Reply With Quote
  2. 03-23-2006, 07:14 PM #2
    LardArse
    LardArse is offline
    Moderator
    Join Date
    Jun 2002
    Posts
    2,440


    Just tested, the solder pads there work. Didnt dare run too long at 1.7v with the stock cooler until I change it to a better one.
    Last edited by LardArse; 03-23-2006 at 07:16 PM.
    Reply With Quote Reply With Quote
  3. 03-23-2006, 07:54 PM #3
    aicjofs
    aicjofs is offline
    Xtreme 3D Team
    Join Date
    Sep 2005
    Location
    Portland, OR
    Posts
    314
    I'm gettting

    0 ohms to ground on pin 32

    5Meg ohms to ground on pin 22

    judging by picture above if you don't remove the resistor you would take the "D511" point to ground for 1.4v? "D511" is same as pin 21.
    3770K @ 4.8Ghz 1.42V | GSkill 2x4GB @ 1066Mhz | Asrock Extreme4
    2600K @ 4.5Ghz 1.38V | GSkill 2x4GB @ 933Mhz CAS 9-10-9 1.5v | Asrock Z68M/USB
    1090T @ 3.8 Ghz 1.42V | Crucial 4x2GB 666 CAS 8 | Asus M4A79XTD EVO
    Q6600 @ 3.66Ghz(8x458) 1.35V | GSkill 2x2GB @ 550Mhz 5:5:3:13 2.1V | Asus Maximus Formula(Rampage 0401) |

    Reply With Quote Reply With Quote
  4. 03-23-2006, 08:44 PM #4
    afireinside
    afireinside is offline
    I am Xtreme
    Join Date
    Aug 2003
    Posts
    7,825
    Quote Originally Posted by LardArse


    Just tested, the solder pads there work. Didnt dare run too long at 1.7v with the stock cooler until I change it to a better one.
    Great work sham! That's sooooo easy. I'm kicking my self here because all the XFX XXX's are sold out
    Phenom II 940 BE / ASUS M4A79 / HD5770 Crossfire
    3770mhz CPU 2600mhz NB | DDR1040 5-5-5-15 | 900/1250
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules