[As request]Team Group Xtreem line 2gb set 3d mark actions

[Onepagebook]

Conditions & Testbed:

OS: Windows XP sp2 Tradtional Chinese BIG5,
CPU: AMD A64 X2 4600+ Manchester LDBHE 0540VPMW
HD: Maxtor 100gb Sata single drive
PSU: Silverstone ST60F
VGA: BFG 7900gtx stock heatsink running SLI mode@ 720/880

RAM:...Please note, CPU all set at same speed.
1. Xtreem cronus I/A series, DDR500 3-3-2-8@ DDR500, 2-3-2, 2.6v
2.Xtreem Cronus UCCC DDR5003-4-3@ DDR600, 3-4-3, 2.6v
3.Xtreem Cronus Micron 5b-f DDR500, 3-3-3@ DDR 540~550, 2.65v

Benches:
3d mark 05 and 06

1.I/A series, 05 and 06:





2. UCCC , 05 and 06:





Go to dinner with GF, Micron?..haha secret!! Will update couple hours later.
Stay tune.

Mission completed!
Micron 5bf ddr500, 3-3-3-8@ ddr550 3-3-3-6, 2.66v..
forgot to mention:
**on the Venus:
I/A use 4/3 DS/DDS
UCCC use 3/3
5bf use 3/3

3d05 and 06:





you guys have great weekend.

************************************************** ************************************************** *************
**3/19/2006 update:
Same Testbed, take challenge on I/A series , World's First bench with
2gb set DDR600, 3-3-2-6 2.75v consecutively run through 3d mark 05 & 06
of cours with CPUZ verified.

DDR604:
CPUZ id 80249



3d 05 &06

[tHe_jOkeR]

Nice review!

[shuRe]

yes a great review, nice to see the info on the higher fsb needed with slack timings to meet those of a lower fsb with tight timings

[Onepagebook]

mission completed, updated with the info of DS/DDS on venus
you guys have great weekend.

[Vassili]

Onepagebook
Xtreme Legend ^2


252MHz 2-3-2-5 3D stable

[dominick32]

Thanks for the excellent review OPB..

[Onepagebook]

Thanks Vassili, I wanna ask Fugger if I am capable of being "A64 mem tweaking Guru"

[ozzimark]

hope dinner went well

all the benches look.. well, surprisingly similar. i thought your micron could do 300mhz? i guess 302mhz is too far
for the title.. i think it'd describe you quite well

[[XC] moddolicous]

Great scores OPB. Are you gonna put the 7900gtx's under DI or something? [OT] Do u have a 24/7 comp?? If so, can you run rosetta for us?? [/OT]

[Cooper]

JEEZ !!
That`s some awsome scores.
OPB YHPM

[Coroner Kyle]

Guru is not high enough praise, I was thinking master. Great review.

So the tightest timed sticks @ the lowest speed scored the highest.

And isn't your chip an 0540 not an 0450.

[Onepagebook]

Kyle, that's why I am not ready to be Master yet.
Correct that already, thank you.

Next project(OPB-S7e9h3n 's No.2) is:

FX60@ 236x14 with upper divider 233, so ram @ 275, cpu full speed@ 3.3g

4600+@ 275x12 1:1, cpu speed @3.3g
then I will do 3d mark comparison, it will clearly tell you if L2 512k is on par with L2 1mb type dual core cpu.

[WC Annihilus]

What was highest 3D stable on the I/A at 3-3-2-8?

[Coroner Kyle]

Next project(OPB-S7e9h3n 's No.2) is:

FX60@ 236x14 with upper divider 233, so ram @ 275, cpu full speed@ 3.3g

4600+@ 275x12 1:1, cpu speed @3.3g
then I will do 3d mark comparison, it will clearly tell you if L2 512k is on par with L2 1mb type dual core cpu.

Sweet, I heard s7e9h3n discussing this earlier. I'm very excited about this project. In fact I could probably do it on my SS w/ my 4600+ and FX60, but there's a reason you guys are the X.I.P.'s.

[Onepagebook]

WC..3-3-2-8?
my set can be over 600.

Kyle, you are more than welcome tojoin me and steve.
he is xip, I am not, but I think he is done for xs by now.

[WC Annihilus]

Ya, I noticed you could do over 300 on your testing thread, but couldn't remember if you said it was 3D stable or not. Could we get a screenie of #D benchmarks at 300 (or whatever the highest was) at 3-3-2 to compare against 250 at 2-3-2?

[Onepagebook]

I will do, stay tune, now am doing my school project.

[dogsx2]

.

Next project(OPB-S7e9h3n 's No.2) is:

FX60@ 236x14 with upper divider 233, so ram @ 275, cpu full speed@ 3.3g

4600+@ 275x12 1:1, cpu speed @3.3g
then I will do 3d mark comparison, it will clearly tell you if L2 512k is on par with L2 1mb type dual core cpu.

Great!!!! I'm looking forward to your results on that.

[WC Annihilus]

Thanks man, looking forward to all results of everything and whatever you're doing

[bachus_anonym]

Interesting comparison and some nice RAM you got there stashed, Kevin

[Onepagebook]

**3/19/2006 update:
Same Testbed, take challenge on I/A series , World's First bench with
2gb set DDR600, 3-3-2-6 2.75v consecutively run through 3d mark 05 & 06
of cours with CPUZ verified.

[WC Annihilus]

Thanks man! Looks amazing

[DaWaN]

**3/19/2006 update:
Same Testbed, take challenge on I/A series , World's First bench with
2gb set DDR600, 3-3-2-6 2.75v consecutively run through 3d mark 05 & 06
of cours with CPUZ verified.

Monster sticks Those sticks defently bring back the Z503 speeds back
DDR600 at even tighter timings

[Onepagebook]

Thanks man! Looks amazing

Sure, No problem, my pleasure.
This thread will help to compare how the different parameters set up from majory 2gb sets under same CPU speed.

[bachus_anonym]

**3/19/2006 update:
Same Testbed, take challenge on I/A series , World's First bench with
2gb set DDR600, 3-3-2-6 2.75v consecutively run through 3d mark 05 & 06, of cours with CPUZ verified.

Two questions, Kevin:
1. Does the fact that you're testing on Venus make things different? Would your Ultra-D OC these to DDR600 as well?
2. What would be the average you think these would do - excluding your pair? What can be safely considered as "average-joe's" set?

DDR600 3D stable @ 5-2-3-3.0-1T is just insane, If you asked me I wouldn't mind a pair like that If it can be had for that $220...

Thanks!