Asrock 939Dual-SATA2 Vmods

[Marvin_The_Martian]

Persivore you're the man

Done the vcore mod two times now, three times when including the ocwbeta mod I did before, and they work like a charm. First time I had a wire coming off in two hours off running. I was like wtf...
Just a black screen, and when I treid to reboot I kept just that black screen, didn't beep either nothing. Looked at my booster and it was showing vdim @ 1.4v. I thought I killed something, checked the wires and one was loose so I removed the other one. Still didn't boot, vdim still so darn low. Took the ram out, rebooted fine with my backup ram. Afraid I freid my ram, put them back one at a time and they were both fine. Vdim back to normal to. I still don't know what the hell went wrong there but I'm glad it's all good now anyway

Anyway, might need to adjust the vr a bit still, it's giving me .2v above bios and might be a bit to much. Still thinking about vdroop mod and maybe vdd mod. And still waiting for you to come up with another vcore readpoints because those three you pointed out in post #1 are emailed and won't be solderd on ( my experience then ). But might have holded if I used some hotglue like I did the last time for the vcore mod.

Persivore

You deserve a

Edited in some pics, hotglue appleid already so there's not much to see ( details of the soldering job )


This pic is really bad but shows where I put the vr so I thought what the heck