MMM
Page 1 of 3 123 LastLast
Results 1 to 25 of 75

Thread: Dual cascade initial works...

  1. 03-10-2006, 04:23 AM #1
    nachthymnen
    nachthymnen is offline
    Master of nebulah frost
    Join Date
    Dec 2004
    Location
    Dolomites(Italy)
    Posts
    2,238

    Dual cascade initial works...

    My friend Andrea(Dimas)of PCTuner.it is working for my first cascade...
    Expecting under -100°C evap temp when it will be done
    1st stage compressor from 1/2HP and second from 5/8HP.
    R402 for 1st stage and R1150 for the second stage
    Here is the link to the discussion 3d in PCtuner forum...
    Link:
    http://forum.pctuner.net/forum/showthread.php?t=64537
    Last edited by nachthymnen; 03-10-2006 at 06:54 AM.
    Battlefield 3: Nachthymnen666
    Reply With Quote Reply With Quote
  2. 03-10-2006, 04:40 AM #2
    Dimas
    Dimas is offline
    Xtreme Enthusiast
    Join Date
    Sep 2002
    Location
    Italy
    Posts
    540
    Send a message via MSN to Dimas Send a message via Skype™ to Dimas
    thanks for posting nachthy the works will start as soon as possible, now i'm waiting for the bottom of the case, hope to get it quickly....
    DIMASTECH Official Support ENGLISH
    DimasTech USA Shop (serving USA/CANADA and South/America)
    DimasTech Global Shop (serving europe and worldwide, excluding Americas)

    Want to be a DimasTech Reseller?

    Want to be a DimasTech Solution Partner?

    Visit and Like Us - DimasTech Global FaceBook Page
    Visit and Like Us - DimasTech USA FaceBook Page
    Reply With Quote Reply With Quote
  3. 03-10-2006, 04:47 AM #3
    nachthymnen
    nachthymnen is offline
    Master of nebulah frost
    Join Date
    Dec 2004
    Location
    Dolomites(Italy)
    Posts
    2,238
    Quote Originally Posted by Dimas
    thanks for posting nachthy the works will start as soon as possible, now i'm waiting for the bottom of the case, hope to get it quickly....
    TKS to you my friend!!!
    Now I have find a good chip that is waiting to be frozen
    Last edited by nachthymnen; 03-10-2006 at 04:52 AM.
    Battlefield 3: Nachthymnen666
    Reply With Quote Reply With Quote
  4. 03-10-2006, 05:41 AM #4
    Fhqwhgads6680
    Fhqwhgads6680 is offline
    Xtreme Cruncher
    Join Date
    Dec 2005
    Location
    somewhere over the rainbow
    Posts
    1,505
    Send a message via AIM to Fhqwhgads6680
    Wow man that's looking GREAT! Dimas' work is definetly up there with the best so it should turn out AWESOME! Keep us posted with ur results, hopefully your new 57 will fly under those temps!!!


    Brandon
    Heatware | Ebay:Crazymullen | If you are unsure what Fhqwhgads means You are REQUIRED to go HERE| Powered by Centon Ram

    IMHO Waste is a computer going to a landfill having done actual computations less than 90% of it's life. 90% of the computers powered on right now are idle or powered off; what a waste! [/B]

    Is it a coincidence that your wifes pc is called Uranus?

    Reply With Quote Reply With Quote
  5. 03-10-2006, 05:47 AM #5
    nachthymnen
    nachthymnen is offline
    Master of nebulah frost
    Join Date
    Dec 2004
    Location
    Dolomites(Italy)
    Posts
    2,238
    Quote Originally Posted by Fhqwhgads6680
    Wow man that's looking GREAT! Dimas' work is definetly up there with the best so it should turn out AWESOME! Keep us posted with ur results, hopefully your new 57 will fly under those temps!!!


    Brandon
    TKS...DIMAS has already complete a -100 dual cascade
    This is his second work and I'm sure to be happy when it will be done...
    I hope my FX-57 don't have a low CB...
    This is a fast test under Vapo LS:
    Battlefield 3: Nachthymnen666
    Reply With Quote Reply With Quote
  6. 03-10-2006, 05:59 AM #6
    Fhqwhgads6680
    Fhqwhgads6680 is offline
    Xtreme Cruncher
    Join Date
    Dec 2005
    Location
    somewhere over the rainbow
    Posts
    1,505
    Send a message via AIM to Fhqwhgads6680
    wow...and at pretty low voltage for that OC! my opty at 1.71v can't get past 3.255 on my single stage....I need a more worthy chip lol! What the highest you've benched it at?

    GL mate!
    Brandon
    Heatware | Ebay:Crazymullen | If you are unsure what Fhqwhgads means You are REQUIRED to go HERE| Powered by Centon Ram

    IMHO Waste is a computer going to a landfill having done actual computations less than 90% of it's life. 90% of the computers powered on right now are idle or powered off; what a waste! [/B]

    Is it a coincidence that your wifes pc is called Uranus?

    Reply With Quote Reply With Quote
  7. 03-10-2006, 06:06 AM #7
    nachthymnen
    nachthymnen is offline
    Master of nebulah frost
    Join Date
    Dec 2004
    Location
    Dolomites(Italy)
    Posts
    2,238
    Quote Originally Posted by Fhqwhgads6680
    wow...and at pretty low voltage for that OC! my opty at 1.71v can't get past 3.255 on my single stage....I need a more worthy chip lol! What the highest you've benched it at?

    GL mate!
    Brandon
    I have to say that my EX0516(R.I.P) can close SPI 1M @ 3612 with 1.631V...
    But has the CB @ only -40...
    I hope that this 0530 can go down @ -60 or lower
    Battlefield 3: Nachthymnen666
    Reply With Quote Reply With Quote
  8. 03-10-2006, 06:08 AM #8
    boardy
    boardy is offline
    Banned
    Join Date
    Sep 2004
    Location
    Reading, UK
    Posts
    160
    Send a message via MSN to boardy
    What motherboard are you using as I notice your using Win XP64?

    Nice OC results My FX55 will do 3.1Ghz with 1.45v on air

    Boardy
    Reply With Quote Reply With Quote
  9. 03-10-2006, 06:13 AM #9
    nachthymnen
    nachthymnen is offline
    Master of nebulah frost
    Join Date
    Dec 2004
    Location
    Dolomites(Italy)
    Posts
    2,238
    Quote Originally Posted by boardy
    What motherboard are you using as I notice your using Win XP64?

    Nice OC results My FX55 will do 3.1Ghz with 1.45v on air

    Boardy

    I use a DFI UT lanparty nF4Ultra-D (623-3).
    I don't have install driver of any kind...I use only fo SPI test...
    It's not bad but @ 3584 it's very unstable
    Battlefield 3: Nachthymnen666
    Reply With Quote Reply With Quote
  10. 03-10-2006, 06:21 AM #10
    nachthymnen
    nachthymnen is offline
    Master of nebulah frost
    Join Date
    Dec 2004
    Location
    Dolomites(Italy)
    Posts
    2,238
    This was my dead 0516:
    Battlefield 3: Nachthymnen666
    Reply With Quote Reply With Quote
  11. 03-10-2006, 07:05 AM #11
    Fhqwhgads6680
    Fhqwhgads6680 is offline
    Xtreme Cruncher
    Join Date
    Dec 2005
    Location
    somewhere over the rainbow
    Posts
    1,505
    Send a message via AIM to Fhqwhgads6680
    Wow thats a beastly chip. What steeping? those 051x were mostly CABCE's weren't they? hopefully you CABNE will enjoy being frozen I have a feeling it'll clock very well under cascde...most CABNE's do very well from what I've seen with the opteron craze.
    Heatware | Ebay:Crazymullen | If you are unsure what Fhqwhgads means You are REQUIRED to go HERE| Powered by Centon Ram

    IMHO Waste is a computer going to a landfill having done actual computations less than 90% of it's life. 90% of the computers powered on right now are idle or powered off; what a waste! [/B]

    Is it a coincidence that your wifes pc is called Uranus?

    Reply With Quote Reply With Quote
  12. 03-10-2006, 07:16 AM #12
    nachthymnen
    nachthymnen is offline
    Master of nebulah frost
    Join Date
    Dec 2004
    Location
    Dolomites(Italy)
    Posts
    2,238
    Quote Originally Posted by Fhqwhgads6680
    Wow thats a beastly chip. What steeping? those 051x were mostly CABCE's weren't they? hopefully you CABNE will enjoy being frozen I have a feeling it'll clock very well under cascde...most CABNE's do very well from what I've seen with the opteron craze.
    TKS...it was a CABCE0516WPMW...
    I hope that the 0530 like the cold
    Now DIMAS is waiting for the cascade's Case and then the works continue
    Battlefield 3: Nachthymnen666
    Reply With Quote Reply With Quote
  13. 03-10-2006, 01:13 PM #13
    fatty
    fatty is offline
    -100C Club
    Join Date
    Oct 2004
    Location
    Australia home again !!
    Posts
    747
    Send a message via MSN to fatty
    This is my CABCE 0522 XPMW



    Just polishing off my cascade and then i will test it

    oh yeah sorry 2 x 1gb gskill and 46 processes running in the background when i did the 1 meg run lol
    Quote Originally Posted by s7e9h3n
    Hell, if it would unlock this godly 154, I'd put on a tutu and dance around like a ballerina
    Mach 2 Problems Click
    My Work
    Reply With Quote Reply With Quote
  14. 03-10-2006, 02:54 PM #14
    nachthymnen
    nachthymnen is offline
    Master of nebulah frost
    Join Date
    Dec 2004
    Location
    Dolomites(Italy)
    Posts
    2,238
    Quote Originally Posted by fatty
    This is my CABCE 0522 XPMW



    Just polishing off my cascade and then i will test it

    oh yeah sorry 2 x 1gb gskill and 46 processes running in the background when i did the 1 meg run lol
    What cooling used in this screen?
    Mach 2?
    Battlefield 3: Nachthymnen666
    Reply With Quote Reply With Quote
  15. 03-11-2006, 03:20 AM #15
    nachthymnen
    nachthymnen is offline
    Master of nebulah frost
    Join Date
    Dec 2004
    Location
    Dolomites(Italy)
    Posts
    2,238
    Some images:




    Battlefield 3: Nachthymnen666
    Reply With Quote Reply With Quote
  16. 05-18-2006, 10:14 AM #16
    nachthymnen
    nachthymnen is offline
    Master of nebulah frost
    Join Date
    Dec 2004
    Location
    Dolomites(Italy)
    Posts
    2,238
    A little UP, the case it's ready
    Battlefield 3: Nachthymnen666
    Reply With Quote Reply With Quote
  17. 05-18-2006, 10:28 AM #17
    cold_ice
    cold_ice is offline
    Xtreme Addict
    Join Date
    Dec 2003
    Location
    Austria
    Posts
    1,100
    Send a message via ICQ to cold_ice
    Wow the case looks awesome.
    Reply With Quote Reply With Quote
  18. 05-18-2006, 10:50 AM #18
    Gray Mole
    Gray Mole is offline
    Xtreme Addict
    Join Date
    Apr 2005
    Location
    Closer than you think.
    Posts
    2,018
    I got to see that case today, and was wondering who it was for

    It looks fantastic. Ideal configuration and should make a very nice package for your cascade

    I may have to sweet talk Dimas into making me one of those beauties for mine

    Gray
    [SIGPIC][/SIGPIC]
    Reply With Quote Reply With Quote
  19. 05-18-2006, 10:52 AM #19
    n00b 0f l337
    n00b 0f l337 is offline
    -150c Club Member
    Join Date
    May 2005
    Location
    Northeast, USA
    Posts
    10,090
    Send a message via MSN to n00b 0f l337
    Wow that is a hell of a flex line.


    If you have a cooling question or concern feel free to contact me.
    Reply With Quote Reply With Quote
  20. 05-18-2006, 11:04 AM #20
    godmod
    godmod is offline
    Xtreme Member
    Join Date
    Jul 2005
    Location
    Austria
    Posts
    428
    Send a message via ICQ to godmod Send a message via MSN to godmod
    i rly like thos clean units (case)!
    Reply With Quote Reply With Quote
  21. 05-19-2006, 03:31 AM #21
    nachthymnen
    nachthymnen is offline
    Master of nebulah frost
    Join Date
    Dec 2004
    Location
    Dolomites(Italy)
    Posts
    2,238
    TKS, I also like very much this case.
    It's perfect for my PC room.
    I'm waiting to see the cooling performance
    Battlefield 3: Nachthymnen666
    Reply With Quote Reply With Quote
  22. 05-19-2006, 05:32 AM #22
    nachthymnen
    nachthymnen is offline
    Master of nebulah frost
    Join Date
    Dec 2004
    Location
    Dolomites(Italy)
    Posts
    2,238
    Quote Originally Posted by n00b 0f l337
    Wow that is a hell of a flex line.
    It was laser cutted.
    A thermostat control the start of the second stage when a X temp it's reached
    Battlefield 3: Nachthymnen666
    Reply With Quote Reply With Quote
  23. 05-19-2006, 05:43 AM #23
    wdrzal
    wdrzal is offline
    I am Xtreme
    Join Date
    Mar 2005
    Posts
    4,849
    Laser I would bet a cnc plasma cutter.

    could also be cut on a water jet
    Last edited by wdrzal; 05-19-2006 at 05:48 AM.
    The Laws of Thermodynamics say:

    Zeroth Law: "You must play the game."
    First Law: "You can't win."
    Second Law: "You can't break even."
    Third Law: "You can't quit the game."

    Do you wanna Play Thermodynamics ???????? I forgot "you must"
    Reply With Quote Reply With Quote
  24. 05-19-2006, 10:22 AM #24
    Dimas
    Dimas is offline
    Xtreme Enthusiast
    Join Date
    Sep 2002
    Location
    Italy
    Posts
    540
    Send a message via MSN to Dimas Send a message via Skype™ to Dimas
    Quote Originally Posted by wdrzal
    Laser I would bet a cnc plasma cutter.

    could also be cut on a water jet
    lasercut...waterjet in there cost a lot...
    DIMASTECH Official Support ENGLISH
    DimasTech USA Shop (serving USA/CANADA and South/America)
    DimasTech Global Shop (serving europe and worldwide, excluding Americas)

    Want to be a DimasTech Reseller?

    Want to be a DimasTech Solution Partner?

    Visit and Like Us - DimasTech Global FaceBook Page
    Visit and Like Us - DimasTech USA FaceBook Page
    Reply With Quote Reply With Quote
  25. 05-20-2006, 04:15 AM #25
    nachthymnen
    nachthymnen is offline
    Master of nebulah frost
    Join Date
    Dec 2004
    Location
    Dolomites(Italy)
    Posts
    2,238
    Dimas has answer for me
    Battlefield 3: Nachthymnen666
    Reply With Quote Reply With Quote
Page 1 of 3 123 LastLast
« Previous Thread | Next Thread »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules