Nv 7800 GS AGP Volt Mods

[persivore]

For the Vgpu mod, try connecting a 100k VR between one of the yellow points and ground. I'm not sure about the exact VR value, but 100k should be reasonably safe.
There's a possibility that there will be no voltage increase visible with a 100k VR. If this is the case, power off and decrease the resistance by a quater. Repeat this until the voltage starts to increase. If the voltage doesn't increase after reaching about 5k, I'll have another look at the mod.

note: XS owners and members will not be liable for any damage caused to you or your hardware, neither can be liable for any breach of the warranty.

[Maviryk]

note: XS owners and members will not be liable for any damage caused to you or your hardware, neither can be liable for any breach of the warranty.

Thanks for the vote of confidence there... hehe.

$oul if you do all these mods this weekend you'll have me beat as the first person to fully mod the GS. I may or may not be modding the card this weekend, my 510 DLX shorted out and I'm waiting for the RMA to come back. I'd prefer to have a good PSU to test out all the mods.