da DRYICE OCing SEssioN (right click..save as..enjoy)
da DRYICE OCing SEssioN (right click..save as..enjoy)
You guys are nuts...
Have you ever heard of casemodding and not just extreme, tweaked and total maxxed out motherboard... :-D
I like it![]()
"M-I-A"
bunch of nerds LOL
bowman your setup is by the far the coolest and messiest looking work area i've ever seenwell done!
one day.. *dreams*
AMD Phenom II 1090T @ 4GHz
MSI 890FXA-GD70
4GB G.Skill PI DDR3 1600 C6
OCZ Agility 2 60GB
Visiontek Radeon 5850
Antec Nine Hundred
Watercooling:
Enzotech Sapphire Rev.A
Swiftech MCW80 + 5850 heatsink
Swiftech MCP655
Swiftech MCR320
And my friends think I'm crazy!!
http://www23.brinkster.com/goofyno1/parasoll.jpg
sorry my friend but it says: HTTP1.1 STATUS 403 Remote Access to this object forbidden This file cannot be directly accessed from a remote site, but must be linked through the Brinkster Member's site.
"M-I-A"
Yeah I know Brinkster is weird but you have to copy the adress into the adress field and then put at space after it then it will work.. (I hope)
yup now it works...
but how cold is it where you are at?![]()
"M-I-A"
Well during the day now in april its about 12-18 degrees celsius but at night when I clock its about 3 degrees celcius!!Originally posted by bias_hjorth
yup now it works...
but how cold is it where you are at?![]()
But I was to late this year because in the winter here in sweden it can be about -20 degrees celcius!!!
BowmanOriginally posted by bowman1964
well i guess i will show my little work space.i have enough freon to fill a small hotel in here.as well as 3 working phase change systems and almost anything else that i might need to build a small ****** opps i have said too much....LOL
a picture says a thousand words.........now dont eveyone laugh at me too hard.![]()
I got a quick story for ya.. My wife has been after me to clean my work space, as we have her family coming to visit. We'll it's embarrassingly clean and orderly compared to yours.
![]()
So, when she checked on me...I showed her a picture of your room (as the before example) and said "now isn't this much better?" She said "Good job" don't ever let it get that bad again!"
Thanks Bowman...I didn't hafta clean a d*mn thing!![]()
Originally posted by Goofy
Well during the day now in april its about 12-18 degrees celsius but at night when I clock its about 3 degrees celcius!!But I was to late this year because in the winter here in sweden it can be about -20 degrees celcius!!!
nice!!
I live in danmark and we sometimes have some pretty cold temp. also.. Nice when you are overclock.. but pretty freezing for the body![]()
"M-I-A"
macci,
That video was great. Did you just drill holes into the p4 HS to mount it in there?
Great soundtrack too! Two thumbs up. You could use a better server though. :p DLing at 24.5kB/s on T3.
Excellent editing too, funny how the fluctuating voltages are synchronous with the percussion.
BTW you are a *EDITed by IFMU* :p
Last edited by will_perdikakis; 04-19-2003 at 02:11 PM.
Yeah, I nearly froze my arse off when it was only 3 degrees celcius and i can only imagne how cold it must be when it's -15 degrees celcius outside!!Originally posted by bias_hjorth
but pretty freezing for the body![]()
lol just use something warm like a cpu and a sleeping back..![]()
"M-I-A"
But now I have figured out that i can have my computer outside and sit in our outdoor room (the room you saw on the picture where i had my screen) and use our infra-red heaters, then it gets warm and cosy!!!![]()
hehe quite smart actually.. I wonder if I should try this someday..
For now I am just using me radiator (for the watercooling).. And its doing a great job...![]()
"M-I-A"
yea good to know i helped you out....LOLOriginally posted by Hobocrow
BowmanI got a quick story for ya.. My wife has been after me to clean my work space, as we have her family coming to visit. We'll it's embarrassingly clean and orderly compared to yours.
![]()
So, when she checked on me...I showed her a picture of your room (as the before example) and said "now isn't this much better?" She said "Good job" don't ever let it get that bad again!"
Thanks Bowman...I didn't hafta clean a d*mn thing!![]()
since i shipped my wife of 15 years down the road.....i dont have to hear that anymore either.LOL
i figure that one room is my getaway from the world.
i do need to clean it up some.but i wanted to give a honest picture.![]()
LOL, Buddy! I hear you, I've been married to this woman all my adult life, well 28 years anyway.. You know what they say, the 3rd time is a charm.Originally posted by bowman1964
yea good to know i helped you out....LOL
since i shipped my wife of 15 years down the road.....i dont have to hear that anymore either.LOL
i figure that one room is my getaway from the world.
i do need to clean it up some.but i wanted to give a honest picture.![]()
I'll submit a pic of my area soon...As I cleanit that is!
BTW. I think your work area is very logical in a "helter-skelter, beatles" sort of way! It's beautiful!![]()
http://homepage.usask.ca/~kdh349/
That's my rig up there. Out of commission right now, but enjoy. Nice setups guys.
AXP1700+ JIUHB 0302 @ 2400MHz - TEC-Watercooled in The Skyscraper
ABIT NF7-S, Sapphire Radeon 9500 Pro, 1.5GB XMS3200C2
XS IRC channel: irc.quakenet.net #xtremesystems
www.ocfaq.com
Here's my rig nothing special just water.
A64 4600+ X2
DFI Ultra D 11/14/05
OCZ Plat rev 2 1g
ATI HDTV Wonder
X800XL
MCE 05
P180
And here's my corner of the world, not much of a corner,lol.
A64 4600+ X2
DFI Ultra D 11/14/05
OCZ Plat rev 2 1g
ATI HDTV Wonder
X800XL
MCE 05
P180
I'm kind of a freak about a neat MAIN desk...but I do have a sloppy workbench.
I hate to advocate drugs, alcohol, violence, or insanity to anyone, but they've always worked for me.
Hunter S. Thompson (1939 - 2005)
As you can guess, my wife wasn't very happy with this scene:
DFI Ultra-d
X2 3800+ @ 2.5ghz Thermaltake Heatpipe
Leadtek 6800gs 515/1300
1gb OCZ Rev 2 Platinum @ 500 (2.5/3/37/1t)
2 x 250gb DiamondMax 10 (RAID 0)
Last Shot - My R-12 Water chiller. I work for a company that produces Medical instruments so I was able to score this from an old medical analyzer![]()
DFI Ultra-d
X2 3800+ @ 2.5ghz Thermaltake Heatpipe
Leadtek 6800gs 515/1300
1gb OCZ Rev 2 Platinum @ 500 (2.5/3/37/1t)
2 x 250gb DiamondMax 10 (RAID 0)
My Current AMD benching rigSorry about all the posts
DFI Ultra-d
X2 3800+ @ 2.5ghz Thermaltake Heatpipe
Leadtek 6800gs 515/1300
1gb OCZ Rev 2 Platinum @ 500 (2.5/3/37/1t)
2 x 250gb DiamondMax 10 (RAID 0)
Bookmarks