Intel 65nm overclocking thread

[JoeBar]

Great clocks boostedevo!

[boostedevo]

Thanks!!

[PcCI2iminal]

first run with DI


http://valid.x86-secret.com/show_oc?id=72436





P5WD2-E no mods
Cedarmill 631
XMS2 Pro

[leejsmith]

Did you find the vcore droop improved under dry ice ?

do you have any pics of your socket t insulation i was curious how to insulate the leaver / clamp.

nice clocks btw.

first run with DI


http://valid.x86-secret.com/show_oc?id=72436


P5WD2-E no mods
Cedarmill 631
XMS2 Pro

[boostedevo]

Nice clocks Pc! Lots of Vc How bad does it droop on load? Mod that board and step up on the mem for the SPi's.

I hope to be putting my 661 and 930 under DI in next week or 2 (waiting on a tube). I am *hoping* for 6GHz benchable on the 661 (5.4GHz benchable/5858 suicide on the SS) and maybe 5.7+GHz on the dual core, but I expect them both to "suicide" >6GHz....hopefully

[PcCI2iminal]

@ leejsmith

here my friend



Boostedevo

droop on load is very bad ,idle @ 1.72v and load @ 1.64v ,my cpu/psu is enough for 6ghz or more but need mods to get it

6ghz with 930 will be sweet ,GL with container and your new target(fsb@400)

[leejsmith]

thanks

did you use any grease in the socket or just the insulation around it ?

@ leejsmith

here my friend


Boostedevo

droop on load is very bad ,idle @ 1.72v and load @ 1.64v ,my cpu/psu is enough for 6ghz or more but need mods to get it

6ghz with 930 will be sweet ,GL with container and your new target(fsb@400)

[boostedevo]

Yeah, get that vdroop mod done ASAP! Do a Vddr mod to and get that mem fired up for SPi too...my 661 did 23.31 @ 5.5GHz (DDR1030 4-3-2-4). We need more Netbursts in the 22s range

I've been to 400FSB before @ 14x on the 670 just long enough for a screenie...6GHz on a Presler @ 15x would be nuts, even just to see it. I'd be happy if it even benched stable at 5.6-5.8GHz...5.25GHz 3Ds are nice already ("for an Intel" )

Good luck on the hunt for 6GHz...can't wait to see you hit it!

[PcCI2iminal]

thanks

did you use any grease in the socket or just the insulation around it ?

just insulation around the socket but i will remove it to do a better job ,for hours of benching grease is a must



Boostedevo my dividers are killing me....with rams like yours i can get that 22s Pi without mods

5.25GHz 3Ds are nice already

my scores with 631 and x1900xtx stock

3d01 37.4k
3d03 19.5k
3d05 11.4k

("for an Intel" )

[boostedevo]

Oh man, I WISH I had an XTX, this XT and its weak clocks made getting these scores an absolute project...took 3 days of benching literally, LOL. I have an 06 that's not worth posting (7223) with the card at stock clocks....haven't run it yet with higher clocks. One thing for sure, the 661 was NO WHERE even close to these scores with 5.4GHz on it

1900XT 790-800/850, 930 @ 5250-5265 (GPU water, 930 SS). Definitely not bad for an Intel IMHO

[PcCI2iminal]

Oh man, I WISH I had an XTX, this XT and its weak clocks made getting these scores an absolute project...took 3 days of benching literally, LOL. I have an 06 that's not worth posting (7223) with the card at stock clocks....haven't run it yet with higher clocks. One thing for sure, the 661 was NO WHERE even close to these scores with 5.4GHz on it

1900XT 790-800/850, 930 @ 5250-5265 (GPU water, 930 SS). Definitely not bad for an Intel IMHO

OMG

Boostedevo absolutely amazing scores dude - RESPECT!

One thing for sure, the 661 was NO WHERE even close to these scores with 5.4GHz on it

i was looking my 3d scores and 930 owns 631

[boostedevo]

Yeah, it was beating the 661 in the mid/upper 4GHz range already. 06 had a 900 gain on CPU score, 05 is about 1000-1500 higher, 03 is like 2500-3000 higher and 01 is out of the ballpark higher, LOL.

Make no mistake tho, those scores were HARD to get, 05 in particular. I benched that one for hours on end. You know what got me from 13950->14K+? 1 more FSB and Performance Mode = Turbo, HAHAHA. I've had that shut off for a year and was so at my wits end, I was like, screw it, I'll give it a shot, LOL. It would've been a lot easier had I spend the extra $100 on an XTX...800+/900 on the card would've made it a ton easier.

Nice to have twice the cache running almost the same clocks I am loving this 930 to no end and it took SO much for me to order it since my first one was a dud (like 4.5 benchable on phase, 4.8 suicide). It's so nice, I want to put it under dice, but at the same time I don't

[PcCI2iminal]

Yeah, it was beating the 661 in the mid/upper 4GHz range already. 06 had a 900 gain on CPU score, 05 is about 1000-1500 higher, 03 is like 2500-3000 higher and 01 is out of the ballpark higher, LOL.

i love the new forcewares and cats ,they are doing a good work for dual cores,
can't wait to see Yonah and Conroe running some xtreme 3dbench

Make no mistake tho, those scores were HARD to get, 05 in particular. I benched that one for hours on end. You know what got me from 13950->14K+? 1 more FSB and Performance Mode = Turbo, HAHAHA. I've had that shut off for a year and was so at my wits end, I was like, screw it, I'll give it a shot, LOL.

fx-57 @ 3ghz + 7800GTX 500/1400 @ SLI only do 14k

I want to put it under dice, but at the same time I don't

i hit 5.55ghz on air and i don't think water or a better air cooler can help me with more clock ,dice was the only choice for me ,for you my friend is a bit diferent, you use a good SS maybe the change make no great diference(enough for 6ghz i guess) ,just give a try,we are waiting for yours scores under dice.

[nicepun]

Well mine OC is not obviously as impressive as the one from PcCI2iminal but I guess it's a start.

[Shinuza]

first run with DI



P5WD2-E no mods
Cedarmill 631
XMS2 Pro

This IS nice

I know I would like your new toys

[PcCI2iminal]

This IS nice

I know I would like your new toys

yeahh , i had a good start for my first run with dice.

@ nicepun

your clock with low vcore is amazing my friend,i can run that pi @ 4.9ghz and the same vcore but under low room temp(0C)
congrats
I`ll be watching this!

Presler + x1900xtx @ stock


http://valid.x86-secret.com/show_oc?id=72696





droop 1.7v -> 1.63v @ idle

[Shinuza]

Dualies make you earn at lot

Ain't the vcore falls down more when loaded?
Just mod it

[nicepun]

Did the vdroop with a 30k trimmer, lapped the heck out of my 930, and the waterblock as well and ended up with

http://valid.x86-secret.com/show_oc?id=72898

Pics of the lapped cpu:





At 1.520vcore I get 28c/36c

PCMark04 = 9,540

[IluvIntel]

This IS nice

I know I would like your new toys

absolutely, that is stunning for cheapest Cedar mill ....

[Helix]

Hey guys!
I’ve been testing my new system

Intel 920D cooled by Scythe Ninja + revoltec dark red
Asus P5WD2-e
2 GB Patriot XBLK PC5600
Gainward 7800GTX 512

Some super pi 1M with no tweaks at all (I was running in my 24/7 system with folding too :P )
Now some quick priming test to check stability.

Some memory tests too:
7500 mb/s sweet!



pcmark2004 @4.3ghz
Hope I can do the vcore Droop mod next week... Maybe it will be benched @ prommy too.
This are not impressive results but stable for folding and gamming

Later on I’ll post some extreme benchs… At least I’ll try to do so.
[[]]

[neoman]

nice system you have there What PSU do you use? and what are your load teps?

[Tasselhof]

My new 930 presler
scythe ninja + fan (~2100rpm) 4310 (287.45х15).


24/7, fan at 1400rpm(all system fans <1200-1300rpm)
275x15=4130 1.4v


Helix, wish i have 920 like yours)

[Byron]

nicepun, did you notice any substantial difference in overclocking after lapping it?

Cheers

[nicepun]

nicepun, did you notice any substantial difference in overclocking after lapping it?

Cheers

Before the lapping and the vdroop I was only able to do 4.2Ghz stable, with load temps up to 48~50c, @ 1.465vcore. Now if I use the same vcore my load temps don't go over 32c just to give you an idea.

Before: 4.20Ghz

After: 4.50Ghz

300Mhz increase. Also, my PSU has reached its limit so I might be able to do more once I upgrade.

[PcCI2iminal]

Dualies make you earn at lot

Ain't the vcore falls down more when loaded?
Just mod it

no ,the droop is the same for idle or load ,i will mode it

@ nicepun

Before: 4.20Ghz

After: 4.50Ghz

good work and great increase

congrats