Hi, i've done the vdroop mod to my board, based on the one @ocforums, but not exactly the same. Here some pics:








I know, i should have done the pics before the liquid tape, but i was in a hurry and forgot it, but i think is easy to see the points, if not, i'll search a LET-free pic and mark the points.

I hope this can help you


Oh, i forgot it, the results are so far the same as were with the P5WD2 -P, 0,1v plus than set in bios, and droop as much as 0,01v.

I used a 100k vr, when mod done, adjusted vr till get 40k on it, not before, after mod is done. Power up the pc and adjusted till no droop. Easy.