is this normal with X1900XTX???

[chefnr1]

This is my air run on both cpu and gpu, gpu has a modded bigger hsf will post pic's of it too, but i've tryed both driver that driver witch came with the card 5.13 and the modified 6.1 that is posts here, the 5.13 is no hit at all and mod 6.1 is a little better but i cant clock that much at all, it's with my rig in sign.
Heres what i get with 5.13 driver and vgpu 720/760 and cpu at 3298mhz


and this is with vgpu 695/758 and cpu at 3259mhz this is as far i can go with the X1900XTX and it's all on stock volt.

With mod 6.1 driver it flashing and glitching when i run 3d01 and hang att org clock, and 05-03is like 5.13 driver's.
heres some pics how i aircooling.


and here is the themp on graph and clock on both cpu and vgpu.


what am i doing wrong when i cant get a higer clock on the graphic card, all set on high performance no overdrive are on and as i say before all on stock volt, i know more people that have the same problems, is there anyone who have a clue to get it work as it should do,because i cant manage it
forgot to say i cant use overclocker att all in 3d it wont run at all when i am clocking with that prog all 3dmark hang o not start or han on load the tests, is the card defekt or what is it that have happend to it with stock cooler i had the same clock but much higer temps...

[G H Z]

Couple of things. First it looks like you don't have the Multiprocessor driver running on your FX from the 06 CPU tests. You might need a BIOS update on your board, have you checked that?

On the card after installing the drivers I'd disable ATI Hotkey Poller in Services Manager, re-boot and then try ATI Tool Beta12a. Your clocks will not be as high as Overclocker but the scores will be better when you get it set up right.

[chefnr1]

Couple of things. First it looks like you don't have the Multiprocessor driver running on your FX from the 06 CPU tests. You might need a BIOS update on your board, have you checked that?

On the card after installing the drivers I'd disable ATI Hotkey Poller in Services Manager, re-boot and then try ATI Tool Beta12a. Your clocks will not be as high as Overclocker but the scores will be better when you get it set up right.

no i dont have Multiprocessor driver running on XP and why do i need that when i dont run as a multiprocessor, and i have bios 623-2, and i have disabled ATI Hotkey Poller, and i use ATI Tool Beta12a, and what bios can you recomend for my board??

[G H Z]

Man I need to sleep, I thought you had an FX-60

One thing I think you are missing for sure is do not disable AI in Catalyst Control Center, that hurts scores.

[SIOUX]

Chefnr1:

If ati hotkey poller is disabled, you cant OC 3d clocks, course they are disabled. try and enable it and try 3d clocks again

[chefnr1]

G H Z hehehe no it's an FX57

ok SIOUX i will try that, and should i stay with the volts that are shown in overcklocker and i shall not use ATITOOL Beta12a..

[SIOUX]

G H Z hehehe no it's an FX57

ok SIOUX i will try that, and should i stay with the volts that are shown in overcklocker and i shall not use ATITOOL Beta12a..

no...dont touch the voltage when using 3d clocks. it will do that automaticly. you can only set voltage when oc in 2d mode. just set the clocks in 3d, and the voltage will automaticly jump to 1.425 on the core. mem volt does not matter in 3d.

my experience with these card is that in 2d clocks you can clock the card higher on the core, but lower on the mem. in 3d clocks you will get a better 3d01 result than you will in 2d, and be able to oc the mem more.

but in 3d05 you will be better of clocking in 2d mode. but i will suggest you to work on the 3d clocks to start with

if you are on msn tonight after midnight i will be more than happy to guide you through both 2d and 3d oc