Awesome scores guys. Would you guys mind posting what voltages you used with your X1900's? Even listing what the default voltage is would be beneficial since I can't seem to find it anywhere.
Awesome scores guys. Would you guys mind posting what voltages you used with your X1900's? Even listing what the default voltage is would be beneficial since I can't seem to find it anywhere.
2600k@4.9Ghz 1.42V | Asrock Ext 3 Gen 3 | Custom H20 | 16GB PC3 1600 | 7970@1375/1600
Xt flashed to XTX.....No OC other than bios flash........Stock cooler...the slower score is my max clocked x1800xt 06 record
Last edited by chew*; 01-28-2006 at 01:11 AM.
heatware chew*
I've got no strings to hold me down.
To make me fret, or make me frown.
I had strings but now I'm free.
There are no strings on me
My CPU is such a bottleneck, with 2.8ghz and 680/1600 my score was lower than 2.9 ghz and 670/1600 :| and with several hundred points!
Opteron170/X1900XT/OCZVX: 42128 3d01se - 22447 3d03 - 14037 3d05
Main:
Gigabyte P35 DS4 Rev 2.1
Core 2 Q6600 @ 3.81 Ghz, 1,45v
4x2GB Kingston HyperX PC-6400 LL
Powercolor HD5870 LCS Edition, EK Fullcover block shizle
2x Intel X25-M 80GB Gen2, RAID0
Asus Xonar D2X
What are the best tools used for voltages/clocks and the X1900???
Core/Mem speeds = ATI Tray Tool?
Core/Mem Voltages = ATI Tool 12 Beta?
Last edited by FlyBoyGeo; 01-28-2006 at 02:48 AM.
NEW: ASUS GTX670 and extra 6GB Mushkin 998805
i7-930 @ 4.2 | ASUS Rampage III Extreme 1005BIOS | Noctua NH-D14 | 12GB Mushkin 998805 6-8-6-24 | ASUS GTX670 | Dell 2407WFP | SB X-Fi Fatality | Corsair SP2500's | Samsung SH-S183L | Silverstone OP1000 | Coolermaster HAF-X | Rock Solid 2+ Years!
Mojo
Family
Biostar TP55 XE - Core i7 860(ES) @ 4.2ghz - CNPS10X Extreme - G.SKILL 1600 - Galaxy GTX275 - Velociraptor 300GB x 2 - Zippy TypeR 600w
Criminal
Biostar Tpower X58A - 920~Gulf - G.SKILL2000CL8 - GTX580 - Intel 520 120GB - Antec HCP 1200w
Biostar TP67XE/TZ77XE4 2500k~3770K - G.SKILL 2800 - GTX480 - OCZ Vertex2 50GB - Corsair AX1200
Biostar Tpower X79 i7 3820 ~ E5 2680 - G.SKILL 2400C11 - GTX560Ti - Intel 520 120GB - AX1200i
Kids
P4GD1 - Pentium M 780 - XMS Xpert400 - GTX460 - Raptor 36GB - Aopen 560w
Last edited by FlyBoyGeo; 01-28-2006 at 08:50 PM.
NEW: ASUS GTX670 and extra 6GB Mushkin 998805
i7-930 @ 4.2 | ASUS Rampage III Extreme 1005BIOS | Noctua NH-D14 | 12GB Mushkin 998805 6-8-6-24 | ASUS GTX670 | Dell 2407WFP | SB X-Fi Fatality | Corsair SP2500's | Samsung SH-S183L | Silverstone OP1000 | Coolermaster HAF-X | Rock Solid 2+ Years!
Just a small update , been trying to clock the card higher by upping volts with no positive results at all In fact any volts higher then stock just made the things worst And ya , i tried to actually lower volts - it didn't help too ... Benches done with open window , ambient temp outside right now here in Atlanta is 53° F , probably around only 65° F in my room
FX57 @ 3157MHz , 1.50V , 263x12.0 , HTT x4
Cooler Master Hyper 6
DFI LP UT nF4 SLI-DR , 623-3
2x512Mb , 263MHz @ 2.0-2-2-5-1T , 3.4V
Saphire X1900XTX , 735/900 (stock cooler , Def. Voltage )
OCZ Power Stream 600W , OCZ-600ADJ SLI
Win XP Pro SP2 (for now) , Drivers that came on CD from Sapphire (modified 6.1 ? )
3DMark01 : 40010
3DMark03 : 21784
3DMark05 : 13088
3DMark06 : Failed After 45min i gave up , it wouldn't pass Forest or Proxycon tests with 735MHz on GPU ...
Aquamark3 : 109.154
I need to get a second hard drive to install Win2K for 2001 first (don't wanna mess my 24/7 win install i have right now cause i need it to play Battlefield2 lol ) - should help a lot hopefully may be 41.0-41.5K with same settings right ?Originally Posted by Vapor
I don't mind at all m8 - but it looks like i found cards limit for stock cooling , it's time to move on for water cooling and after that for some DI Just waiting for ORB to add X1900 official support firstOriginally Posted by gjwild
It's an OCZ Power Stream 600W (SLI Ready model)Originally Posted by Cooper
Originally Posted by gjwildLet me see , give me a sec. plzOriginally Posted by PlatoonSgtElias
Here are my results.
System:
Opteron 146 @ 3.4Ghz - Mach II GT
1GB Mushkin Redlines @ 243mhz 2-2-2-5
ATI Sapphire X1900XT-X @ 729/891 - Stock cooler
DFI Ultra-D
OCZ Powerstream 600w
3dmark01: 38,834
3dmark03: 21,387
3dmark05: 13,017
3dmark06: 5,674
I couldn't get the card to clock any further either, it topped out at the exact same speed as Gorod's.
|Opteron 146 - 3.4Ghz|Mushkin Redlines - 243mhz 2/2/2/5|X1900XT-X|
|3D Mark:| 01 - 43,317 | 03 - 22,241|05 - 14,360|06 - 6,304|
|Super Pi:| 1M 25.188s| 8M 4m 33.781s|32M 22m 22.516s|
|Modded Mach II GT cooled|
So far can't use ATI Tool... 689/799 on ATI OD..
Last edited by Dumo; 01-28-2006 at 05:27 PM.
I think your 3D01 should be higher at those clocks. Did a quick run with stock X1800XT and NO lod. Maybe its a CCC setting.Originally Posted by Kesnel
I was also thinking that. Would you be able to post your CCC settings up please? If you could that would be great.Originally Posted by loc.o
|Opteron 146 - 3.4Ghz|Mushkin Redlines - 243mhz 2/2/2/5|X1900XT-X|
|3D Mark:| 01 - 43,317 | 03 - 22,241|05 - 14,360|06 - 6,304|
|Super Pi:| 1M 25.188s| 8M 4m 33.781s|32M 22m 22.516s|
|Modded Mach II GT cooled|
Was just going to post the same question. What are the best CCC settings? ThanksOriginally Posted by Kesnel
NEW: ASUS GTX670 and extra 6GB Mushkin 998805
i7-930 @ 4.2 | ASUS Rampage III Extreme 1005BIOS | Noctua NH-D14 | 12GB Mushkin 998805 6-8-6-24 | ASUS GTX670 | Dell 2407WFP | SB X-Fi Fatality | Corsair SP2500's | Samsung SH-S183L | Silverstone OP1000 | Coolermaster HAF-X | Rock Solid 2+ Years!
Originally Posted by gjwildEverything Default :Originally Posted by PlatoonSgtElias
FX57 @ 2813MHz , 1.36V , 201x14.0 , HTT x5
Cooler Master Hyper 6
DFI LP UT nF4 SLI-DR , 623-3
2x512Mb , 201MHz @ 2.0-2-2-5-1T , 3.2V
Saphire X1900XTX , 648/774
OCZ Power Stream 600W , OCZ-600ADJ SLI
Win XP Pro SP2 (for now) , Drivers that came on CD from Sapphire (modified 6.1 ? ) , Def. CCC settings (Balanced)
3DMark01 : 32679
3DMark03 : 18711
3DMark05 : 11289
3DMark06 : 4929
Aquamark3 : 94.727
A64Tweaker & CCC Settings:
Originally Posted by Gorod
You have to set the AI to Advanced and not standard in CCC, and also mipmap to performance thats were you loose your points
The whole world's hip and thats not cool !
Rip Van Hippy
Doesn't expecting the unexpected make the unexpected the expected ?
Light travels faster than sound. This is why some people appear bright until you hear them speak
-------------------------
That's exactly what I aked for Gorod.
Thanks, just wanted to see where you were at w/defaults..
Core 2 Duo E6600
Abit AW9D-Max
GSkill 6400
Thanks for the help.
I'll check my settings and do another set of runs when I'm back home with my rig.
|Opteron 146 - 3.4Ghz|Mushkin Redlines - 243mhz 2/2/2/5|X1900XT-X|
|3D Mark:| 01 - 43,317 | 03 - 22,241|05 - 14,360|06 - 6,304|
|Super Pi:| 1M 25.188s| 8M 4m 33.781s|32M 22m 22.516s|
|Modded Mach II GT cooled|
Going to post mine ASAP, just hopes that the Club3D will rock as much as the rest :/
Playing station: DFI UT X48 T3R @ EK NB // Q6600 @ 3,2GhZ @ True (soon Dtek V1) // 280gtx (soon EK 280gtx) // 2*2GB Gskill 12800 CL7 // Corsair HX1000 // 250GB ES.2 - 160GB T166 - 2*160WD RE // Lian Li V2000B // Swiftech 240+360 - 2*DDC 1
Servers: ASUS Crosshair // X2 3800+ // 2*1GB Gskill PC6400 HZ // R3650 // IBM workstation
Laptop: Znote 4200, running on 5th year now
howcome you guys are using ATI OD and not overclocker tool for clks.
Overclocker relaxes timings on the ram significantly to acheive high frequencies. ATI Tool does not and acheives it's true overclocking potential.Originally Posted by Dynasty
Asus A8N-E
Athlon 64 3200 - XP90
4 x 512 2:3:3:6 Corsair XMS
Sapphire x1900xtx
2 x 74gb 10000rpm WD Raptors
Antec P150 2 92mm Nexus Intakes / 1 120mm Nexus Exhaust
Seasonic S12-500
Improved my score a little bit, but take a look:
Now at 2.9 Ghz:
This is sick, singlecores really suck, give me an X2
Opteron170/X1900XT/OCZVX: 42128 3d01se - 22447 3d03 - 14037 3d05
Main:
Gigabyte P35 DS4 Rev 2.1
Core 2 Q6600 @ 3.81 Ghz, 1,45v
4x2GB Kingston HyperX PC-6400 LL
Powercolor HD5870 LCS Edition, EK Fullcover block shizle
2x Intel X25-M 80GB Gen2, RAID0
Asus Xonar D2X
With overclock tool you can clk core alot higher then OD lets you.Originally Posted by overcast
Relaxed timings you can just clk mem. higher thats all.
I use overclock tool for clks and ati tool for voltage,
been doing this with both X1800/X1900 cards and works like a charm.
You are still benchinng at 690/1600, coz you unlock the CCC overdriveOriginally Posted by ShaidarHaran
However, I also want to see how to control those voltages.
Setting with overclocker tools in 3D mode? then need to also adjust the Vgpu...etc???
CPU: XEON W3540 & Gulftown Q3FE
MB: Asus Rampage III Extreme
RAM: Corsair GT2000C7 2G X 3 ADATA XPG+ 2200+ 2G X 3
SSD: Adata S596 120G
Display Card: Asus EAH 5870
WaterCooling:
Laing D5 Pump + Koolance D5 Top
Radiator: KP 120.3
CPU Block: HeatKiller 3.0 + EK full MB Block
PSU: Antec TPQ 1200W OC
Case: SilverStone TJ-07BW
Bookmarks