Junk Liquid Cooling Gallery

[RObErT_RaTh]

I've just got the one pic for now, will post more later.

[IamMed]

Hi, this is my current build which is still sorta being done (too lazy to strip down and paint everything etc )

PC






PC with lights out


Full Size Pic Here

2 seperate loops:

Loop 1, WACC Passive Res, Eheim 1048 Pump, 120.1 Innovatech Rad, 2 x Papst 120x38mm Fans, MCW6000 Swiftech CPU Block.

Loop 2, Tank-o-Matic Innovatech Res, Eheim 1048 Pump, 92.1 Thermochill HE Rad, 2 Panaflow 92x25 Fans, Graph-o-Matic Innovatech GPU Block, Surge Custom NB Block.

Not as pretty as my previous setup (which is here), but it performs better.

[sponge bob]

my "case"

astek antartica cpu plokk
hydor l30 1200l/h
astek NB plokk on video, guz DYO wont fit on
black ice II pro, 2x120mm papst

temps are very xtreme, 1,75v @2,98ghz a64 3000+ venice and full load IS 36 *c ambiment temp is 22*c

my home made h2o befoure it

[HeUeR]

He he i build my WC system:

here is my WC CPU head

[NortHWizarD]

Well... new to this forum... so thought i would dive right in and post my rig.

It's not complete, still needs a little tidying up, but am working on to custom systems right now and just don't have the time... along with another product about to hit the market... it's just a busy time.

Anyways, here it is... specs are in my sig... temps are about 32 idle and after running folding@home and prime95 for 4 days solid, the highest recorded temps were - CPU: 39, GPU: 40, HDD: 36 (highest GPU temp was found by running Doom3D for 8 hours)

The case is just a typical sized mid-tower case (raidmax scorpio 868w), but everything fits in great and the system is almost silent - i have it in the bedroom and at night when everything is off and it's completely quiet, i can even hear the hdd ticking, the system is that quiet - i love it.

~NortH~

[en4cer]

/\

Where did you get those ram coolers? Looks good.

[el rolio]

mine: real quick before lappie battery dies.....



more pics when i can find them later.

[amduser]

finally got it, a dual lainq :



and know somethink for people, who think big tupes are a must have to achiev good temps. it doesn't matter :

[breaktrev]

I just finished setting up my first watercooling kit. Its just a low end Gigabyte Galaxy that I got second hand, but i'm using it as a learning experience before I move to a Swiftech Apex or comparable kit.

[Damination]

thinked about shorting down the hose lenght :P its quity long though

[kakaroto]

Here is mine







Dual rad stuff

[snq]

Here's mine
I might put a 2nd (larger) radiator in the "roof" of the case if I can get my hands on some more tygon tubing..

[SidVicious]

Clockwise from bottom to top :

Laing D5 (MCP-655) pump
Chevette heatercore with shroud and a 120mm Pabst fan
SoundBlaster Live! 5.1
Sapphire Radeon 9700
Motherboard, tubing and wires



Close-up of the DangerDen TDX waterblock, memory and more tubing

[Trice]

Here's my current setup.

[mindwreck]

little update: replaced battery with a new stopper and added a new etch

[FragTek]

Here's a few pix of my wc setup...

The components are finally starting to show their age a bit, CPU cooling is getting replaced by a custom chilly1 ss in about 2 weeks time though, w00t w00t!

Swiftech MCW6002-64 CPU
2 x DD Maze4 GPU
Thermochill HE120.3 Rad w/ 6 Pana M1A's
2 x Laing D4 Pumps
Tygon & Clearflex Tubing







Damn my shiz is gettin' a bit dusty, time to hit it with some compressed air mefinks!

[Delirious]

My latest incarnation no bling bling here.

[D_o_S]

My latest incarnation no bling bling here.

Um, excuse my noobishness, but what case is that? It looks more roomy than my Stacker...

[el rolio]

--

--

--
and!

--

[Nicksterr]

My new watercooling installed!















This is a temporary setup until I get my stacker, can't stand not being able to put the side panel on and have the air flowing through the case like it should.

[sponge bob]

http://sponge.ez.pri.ee/pildid/ My very cheap case, btw Its my First WC in case :P it took like 8h work to fit things in...








and perfomance is normal i think:
opteron 144 @2,7 ghz 1,425v OCCT 30 min + prime large ffts load 36 (all fans @5v )
CFG temp under load 39*c 6600GT@600/1200 vmoded

its one of the fastest 6600GT in orb, 685/1385 is atm max

[funkflix]

Today i recieved my NB-Cooler, and with that i installed new tubing.

Few seconds after refilling -


Added the hardware -


While running -

[D_o_S]

Today i recieved my NB-Cooler, and with that i installed new tubing.

Few seconds after refilling -


Added the hardware -


While running -

Nice rig,

What tubing (diameter) are you using?

[RMSwins]

1) The fan filter for the bottom 12cm intake fan is on its way; the only reason it is missing is because the original fan was 25mm deep while the replacement Panaflo pushes 38mm.
2) No flashy lights so no night pictures.
3) Currently running Prime95 on both cores at 2.85Ghz on 1.55V; hopefully she will run through the night.

Boring out holes to fit grommets:






Before:


After:

[Staucher]

Staucher, what kind of pump do you have? it must be a beast with some insane head pressure or you have flow at all

its a Laing DCC PRO



Technical data
Measures: (w x d x h) 62x62x38mm (without connections)
Kind of engine: electronical commuted ball engine
Nominal voltage: 12 V DC direct voltage
Allowed voltage range: 6 to 13.2 volt
Lifting height at 12V: 3.7m
Max. lifting height: 420L/h
Transport media: water, water-/glycols-composites*
Max. system temperature: 60ø C
Media contacting parts: stainless steel 1.4571, PPS-GF40, EPDM O-rings,
aluminium oxide, hard coal
Connections: 2 x G1/4" hose connections
http://www.alphacool.de/xt/product_i...cPath=5_26_267

a new version gives it also with somewhat more Horst Power
http://www.alphacool.de/xt/product_i...cPath=5_26_267